Difference between revisions of "Main Page"

From EG1003 Lab Manual
Jump to: navigation, search
 
(540 intermediate revisions by 11 users not shown)
Line 1: Line 1:
Welcome to the EG1003 Online Lab Manual website. This site contains all the academic material you need for the course. For administrative matters such as lab report submission, please visit [http://eg.poly.edu eg.poly.edu].
Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the [http://eg.poly.edu EG1003 website].
 
You can click on anything underlined on this page to link to the material.


== Course Information ==
== Course Information ==
<div style="float:left; width:45%; padding-right: 5%">
<div style="float:left; width:45%; padding-right: 5%">
=== General ===
* [[Perspectives on EG1003|Comments from Course Director]]
* [[Perspectives on EG1003|Comments from Course Director]]
* [[The Course]]
* [[The Course]]
* [[Structure]]
* [[Structure]]
* [[Absence and Lateness Policies]]
* [[Teamwork]]
* [[Teamwork]]
* [[Ethics]]
* [[Ethics]]
* [[Plagiarism]]
* [[How to Use the EG1003 Websites]]
* [[How to Use the EG1003 Websites]]
* [[How to Submit Work to the EG1003 Website]]
* [[How to Submit Work to the EG1003 Website]]
* [[EG Grading Policy]]
* [[Media:Safety_Guidelines.pptx|Safety Guidelines]]
* [[Safety Guidelines]]
<!--* [[Media:Safety Guidelines V2.pptx|Safety Guidelines Presentation]]-->
* [[Keeping a Laboratory Notebook]]
 
* [[Software Requirements]]
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">
=== PowerPoint Presentations ===
 
* [[Media:Introduction_to_EG.pptx|Introduction to EG1003]]
=== Syllabus Content  ===
* [[Media:Introduction_to_EG_-_BC.pptx|Introduction to EGED I]]
<!--* [[Media:Introduction to EG1003.pptx|Introduction to EG1003]]-->
* [[Media:Introduction_to_EGEDII.pptx|Introduction to EGED II]]
<!--* [[Media: Introduction to EG1003 (Summer).pptx|Introduction to EG1003]]
* [[Media:Introduction_to_EGEDIII.pptx|Introduction to EGED III]]
[[Media: Introduction to EG1003 (Summer) (Virtual).pptx|Introduction to EG1003 (Virtual)]]-->
* [[Media:Academic_honesty.pptx|Academic Honesty and Plagiarism]]
<!--* [[Media:INTRODUCTION_TO_EG1003_Fall_2020.pptx|Introduction to EG1003]]-->
* [[Media:Safety_Guidelines.pptx|Safety Guidelines]]
 
* [[Media:Showcase.pptx|Display Case Presentation]]
*[[Media:INTRODUCTION_TO_EG1003_Summer.pptx|Introduction to EG1003]]
* [https://docs.google.com/document/d/1a1MSIiIpc8oDM_V0qH4M26D42yTh16s71tl1Gfc3d3g/export?format=pdf EG1003 Syllabus]
* [https://eg.poly.edu/syllabus.php EG1003 Schedules]
* [[Media:Intro_to_Lab.pptx|Introduction to EG1003 Lab]]
* [[Media:ACADEMIC_HONESTY_&_PLAGIARISM_Fall_2020.pptx|Academic Honesty and Plagiarism]]
* [[EG Grading Policy | Grading Policy]]
* [[Absence and Lateness Policies]]
* [[Software Requirements]]
 
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 34: Line 38:
<div style="float:left; width:45%; padding-right: 5%">
<div style="float:left; width:45%; padding-right: 5%">
=== Write-ups ===
=== Write-ups ===
* [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
* Lab 1
* [[Introduction_to_3D_Printing_Inventor|Lab 1B &mdash; Introduction to 3D Printing]]
** [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
<!--* [[Mousetrap Vehicle Competition|Lab 1C &mdash; Mousetrap Vehicle Competition]]-->
** [[Introduction_to_Revit|Lab 1B &mdash; Introduction to Revit]]
* [[Hot Air Balloon Competition|Lab 1C &mdash; Hot Air Balloon Competition]]
* Lab 2
* [[Boom Construction Competition|Lab 2 &mdash; Boom Construction Competition]]
** [[Computer Aided Design (CAD) Competition|Lab 2 &mdash; CAD Competition]]
<!--*[[Prototyping with Microcontrollers and Sensors|Lab 3 &mdash; Prototyping with Microcontrollers and Sensors (Section A2 Only)]]-->
<!--*** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]-->
* [[Product Evaluation (Sensors)|Lab 3 &mdash; Product Evaluation]]
*** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
<!--** [[Media:Curiosity.pdf|Curiosity (EV3)]] {{bull}} [[Media:Opportunity.pdf|Opportunity (EV3)]] {{bull}} [[Media:Spirit.pdf|Spirit (EV3)]]-->
<!--* [[Product Evaluation|Lab 3 &mdash; Product Evaluation]]-->
<!--* [[Product Evaluation (Select Sections Only)|Lab 3 &mdash; Product Evaluation & Quality Improvement (A1, E1, G1, K1)]]-->
* Lab 3
<!--* [[Product Evaluation (Sensors 2.0)|Lab 3 &mdash; Product Evaluation (Sensors)]]-->
** [[Prototyping with Microcontrollers, Sensors, and Materials|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
<!--* [[Product Evaluation and Quality Improvement (EV3)|Lab 3 &mdash; Product Evaluation and Quality Improvement (A1, E1, G1, K1)]]
<!--** [[Prototyping with Microcontrollers, Sensors, and Materials (Virtual)|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]-->
** [[Media:EV3_Green.docx|Green (EV3)]] {{bull}} [[Media:EV3_Red.docx|Red (EV3)]] {{bull}} [[Media:EV3_Yellow.docx|Yellow (EV3)]]-->
<!--*** [https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]-->
*[[Computer Aided Design (CAD) Competition|Lab 4 &mdash; CAD Competition]]
* Lab 4
** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]
** [[LAZ & MRR Workshop|Lab 4A &mdash; LAZ & MRR Workshop]]
* [[Introduction to LabVIEW|Lab 5 &mdash; Introduction to LabVIEW]]
** [[RAD Workshop|Lab 4B &mdash; RAD Workshop]]
**[https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]
** [[HIR Workshop|Lab 4C &mdash; HIR Workshop]]
<!--* [[Sensors (EV3)| Lab 4 &mdash; Sensors (EGED III Only)]]-->
** Lab 4D &mdash; Model Shop Session I
* Lab 6 &mdash; Model Shop Session
* Lab 5
* [[Digital Logic|Lab 7 &mdash; Digital Logic]]
** [[Introduction to Digital Logic|Lab 5 &mdash; Digital Logic]]
** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]
<!--** [[Introduction to LabVIEW & Digital Logic (Virtual)|Lab 5 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]-->
* [[Sustainable Energy Vehicle Competition|Lab 8 &mdash; Sustainable Energy Vehicle Competition]]
<!--** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]-->
* Lab 9 &mdash; Model Shop Session
* Lab 6
* [[Biomedical Forensics|Lab 10 &mdash; Biomedical Forensics]]
** [[Required Pre-Lab Activity|Lab 6A &mdash; Required Pre-Lab Activity]]
* [[Heat Transfer and Thermal Insulation Competition (Sensors)|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
** Lab 6B &mdash; Model Shop Session II
** [[Media:Therm VI.vi|Therm VI]]
* Lab 7
** [[How to Handle Unusual Data]]
** [[Boom Construction Competition|Lab 7 &mdash; Boom Construction Competition]]
<!--** [[Boom Construction Competition (Virtual)|Lab 7 &mdash; Boom Construction Competition (Virtual)]]-->
* Lab 8
** [[Processes & Water Filters|Lab 8 &mdash; Processes & Water Filters]]
<!--** [[Processes & Water Filters (Virtual)|Lab 8 &mdash; Processes & Water Filters (Virtual)]]-->
* Lab 9
** Lab 9 &mdash; Model Shop Session III
* Lab 10
** [[Sustainable Energy Applications|Lab 10 &mdash; Sustainable Energy Applications]]
<!--** [[Sustainable Energy Applications (Virtual)|Lab 10 &mdash; Sustainable Energy Applications (Virtual)]]-->
** [[Digital Multimeters Guidelines]]
* Lab 11
** [[Biomedical Forensics|Lab 11 &mdash; Biomedical Forensics]]  
<!--* Lab 12
** [[Introduction to Cost Estimating!!!!!|Lab 12 &mdash; Digital Logic]]-->
<!--** [[Biomedical Forensics (Virtual)|Lab 11 &mdash; Biomedical Forensics (Virtual)]]-->
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== PowerPoint Presentations ===
=== PowerPoint Presentations ===
* [[Media:SW_For_Engrs.pptx|Lab 1A&amp;1B &mdash; Software for Engineers]]
* Lab 1
* [[Media:Balloon.pptx|Lab 1C &mdash; Hot Air Balloon Competition]]
** [[Media:Lab1_Software_for_Engineers.pptx|Lab 1A &amp; 1B &mdash; Software for Engineers]]
* [[Media:Boom.pptx|Lab 2 &mdash; Boom Construction Competition]]
* Lab 2
<!--* [[Media:PESensorsA2K2.pptx|Lab 3 &mdash; Product Evaluation (A3, B, C, D, E2, E3, G2, K2, K3, UAI)]] -->
** [[Media:Lab_Computer_Aided_Design_Competition.pptx|Lab 2 &mdash; CAD Competition]]
* [[Media:Lab3_Sensors_Fall_2018.pptx|Lab 3 &mdash; Product Evaluation]]
<!--* [[Media:CAD Competition.pptx|Lab 4 &mdash; CAD Competition]]-->
<!--* [[Media:QualImprov.pptx|Lab 3 &mdash; Product Evaluation & Quality Improvement (A1, E1, G1, K1)]] -->
<!--* [[Media:Product Evaluation.pptx|Lab 3 &mdash; Product Evaluation]]-->
<!--* [[Media:Lab3_Sensors_Summer_2018.pptx|Lab 3 &mdash; Product Evaluation (Summer 2018 Sections Y2, Y3)]] -->
* Lab 3
* [[Media:CAD Lab Presentation.pptx|Lab 4 &mdash; CAD Competition]]
** [[Media:Lab_Prototyping_with_Microcontrollers,_Sensors,_and_Materials.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
* [[Media:LabVIEW.pptx|Lab 5 &mdash; Introduction to LabVIEW]]
<!--** [[Media:Lab_Prototyping_with_Microcontrollers,_Sensors,_and_Materials_Virtual.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]-->
* Lab 6 &mdash; Model Shop Session
* Lab 4
* [[Media:Digital_Logic.pptx|Lab 7 &mdash; Digital Logic]]
** [[Media:LabLAZ&MRRWorkshop.pptx |Lab 4A &mdash; LAZ & MRR Workshop]]
* [[Media:Renewables_Presentation.pptx|Lab 8 &mdash; Sustainable Energy Vehicle Competition]]
** [[Media:Lab_RAD_Workshop.pptx |Lab 4B &mdash; RAD Workshop]]
* Lab 9 &mdash; Model Shop Session
** [[Media:Lab_HIR_Workshop.pptx |Lab 4C &mdash; HIR Workshop]]
* [[Media:DNA_Forensics.pptx|Lab 10 &mdash; Biomedical Forensics]]
** Lab 4D &mdash; Model Shop Session I
* [[Media:Heatxfer.pptx|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
* Lab 5
** [[Media:Introduction_to_Digital_Logic_2022.pptx|Lab 5 &mdash; Introduction to Digital Logic]]
<!--** [[Media:Introduction to LabVIEW & Digital Logic (Virtual).pptx|Lab 5 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]-->
* Lab 6
** Lab 6 &mdash; Model Shop Session II
* Lab 7
** [[Media:Lab_Boom_Construction_Competition.pptx|Lab 7 &mdash; Boom Construction Competition]]
<!--** [[Media:Lab_Boom_Construction_Competition_(Virtual).pptx|Lab 7 &mdash; Boom Construction Competition (Virtual)]]-->
* Lab 8
** [[Media: 2022_Lab_Processes_and_Water_Filters.pptx |Lab 8 &mdash; Processes & Water Filters]]
<!-- ** [[Media:Lab_Processes_and_Water_Filters_(Virtual).pptx|Lab 8 &mdash; Processes & Water Filters (Virtual)]] -->
* Lab 9
** Lab 9 &mdash; Model Shop Session III
* Lab 10
** [[Media:Lab_Sustainable_Energy_Vehicle_Competition_2022_1.pptx|Lab 10 &mdash; Sustainable Energy Vehicle]]
<!--** [[Media:Lab_Sustainable_Energy_Vehicle_(Virtual).pptx|Lab 10 &mdash; Sustainable Energy Vehicle Virtual)]] -->
<!--* [[Media:Sustainable Energy Vehicle Competition (Virtual).pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]-->
* Lab 11
** [[Media:Lab_Biomedical_Forensics-2022.pptx|Lab 11 &mdash; Biomedical Forensics]]
<!--** [[Media:Lab_Biomedical_Forensics_(Virtual).pptx|Lab 11 &mdash; Biomedical Forensics (Virtual)]]-->
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 86: Line 124:
=== Project Information ===
=== Project Information ===
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
<!-- * [[Media:SLDPs.pptx|Introduction to the Semester-Long Design Projects]] -->
* [[Media:Introduction to the Semester-Long Design Projects (SLDPs).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
* [[Media:SLDPs_2018.pptx|Introduction to the Semester-Long Design Projects]]
<!--* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]-->
* [[Fall 2018 Project Configurations]]
<!--* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Summer) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]] -->
* [[Media:Open Lab Rules.pdf|Open Lab Rules]]
<!--* [[Media:INTRODUCTION_TO_THE_SEMESTER_LONG_DESIGN_PROJECT_Fall_2020.pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]-->
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly and Design Challenge (RAD)]]
<!--* [[Spring 2020 Configurations]]-->
* [[Nano-Robotics Challenge (NRC)]]
<!--* [[Media:Open Lab Rules.pdf|Open Lab Rules]]-->
* [[NYU-Housing & Innovation in Revit (HIR)|NYU-Housing & Innovation in Revit (HIR)]]
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly & Design Challenge (RAD)]]
** [[Media:Revit_How_To.pdf|Revit How-To]]
<!--* [[Biomedical Device (BMD)|Biomedical Device (BMD)]]-->
** [[Media:LEEDchecklist.docx|LEED Checklist]]
* [[Housing and Innovation in Revit (HIR)|Housing & Innovation in Revit (HIR)]]
* [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]
** [[Revit-How-To Guide]]
* [[Bomb Disarming Robot (BDR)]]
<!--** [[Media:Updated_Revit_How_To_Guide.pdf|Revit How-To]] -->
* [[Mars Rover Robot (MRR)|Mars Rover Robot (MRR)]]
<!--** [[Media:How_to_Make_an_STL_File_from_a_Revit_File.pdf|How to Make an STL File From a Revit File]]-->
* [[Retrieval and Delivery System (RDS)]]
<!--** [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]  
* [[Search & Recovery Robot (SRR)]]
* [[Bomb Disarming Robot (BDR)]]  
* [[Subterranean Infiltrator & Fortune Retriever (SIFR)|Subterranean Infiltrator & Fortune Retriever (SIFR)]]
* [[Retrieval and Delivery System (RDS) | Retrieval & Delivery System (RDS)]]
* [[Search & Recovery Robot (SRR)]] -->
* [[Mars Rover Robot (MRR)| Mars Rover Robot (MRR)]]  
* [[Lunar Agricultural Zone (LAZ)| Lunar Agricultural Zone (LAZ)]]
 
=== Project Expectations ===
* [[Keeping an Engineering Notebook|Engineering Notebook]]
* [[Teamwork Expectations]]
<!--* [[Professional & Career Development]]
* [[Resume - Ingrid
* [[Cover Letter - Ingrid]]
* [[LinkedIn - https://nyuwassermanblog.com/2021/11/20/how-to-create-a-powerful-linkedin-profile/]]
* [[Portfolio - Victoria]] -->
 
=== Project Submission ===
* [[Submission Guidelines]]
* [[Online Submission FAQs]]


<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
* [[Invention Innovation and Entrepreneurship (I2E)|Invention, Innovation, and Entrepreneurship (I2E) (Section A2 Only)]]-->
* [[Invention Innovation and Entrepreneurship (I2E)|Invention, Innovation, and Entrepreneurship (I2E) (Section A2 Only)]]-->


</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== Project Submission ===
* [[Submission Guidelines]]
* [[Media:Early.docx|Project Submission Form]]
* [[Online Submission FAQs]]


=== Help & How-Tos ===
=== Help & How-Tos ===
* [[3D Printing Extra Credit]]
==== General SLDP ====
* [[Cura Guide|3D Printing Cura Guide]]
* [[Media:Teamwork_Agreement2020.docx|Teamwork Agreement]]
* [[Media:Teamwork Agreement.docx|Teamwork Agreement Instructions]]
* [[Media:Microsoft_Project_Student_Guide.pptx|Microsoft Project Student Guide]]
* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]
<!--* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]-->
* [[Media:MSProj Student Guide.pptx|Microsoft Project Student Guide Presentation]]
* [[Planning Project Scheduling & Costs]]
* [[How to Show Cost Data in Presentations]]
<!--* [[Keeping an Engineering Notebook]]-->
 
==== Prototyping ====
* [[3D Printing and Logo Guide]]
* [[Technical Workshops]]
* <!-- [[Cura Guide|3D Printing Cura Guide]]-->
* [[Virtual Circuit Simulation Guide]]
* [https://docs.google.com/spreadsheets/d/1X-Sj3W7rKKYeUzUMY5eqmQMuMU6Gh1op5HMCAlGhO-I/edit?ts=5d76dbee#gid=682782030 Technical Online Library]
* [[Arduino Coding Guide]]
* [[Sensors Guide]]
<!--*LEGO EV3
* [[Robot Construction Tips|Robot Construction Tips]]
* [[Lego Digital Designer Skill Builder]]
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[Sensors (EV3)]]
* [[Sensors (EV3)]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Training.pptx|Sensors Training]]
* [[Media:Sensors Training.pptx|Sensors Training]]-->
* [[AutoCAD Skill Builder]]
 
* [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
==== VEX Resources ====
* [[Lego Digital Designer Skill Builder]]
* [[VEX How-To Manual]]
* [[How to plan the schedule and calculate costs for a project]]
* <!--[[VEX Building Guide]]  
* [[I2E Kit Components]]
* [[VEX CAD Assembly Guide]]  
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[VEX Library Guide]] -->
* [[How to Show Cost Data in Presentations]]
* [[VEX Lift & Claw Design Guide]]
* [[Media:DMMGuidelines.docx|Digital Multi-Meters Guidelines]]
* [[Media:Vex_Price_Sheet.xlsx|Price list for VEX parts for robot projects]]
</div>
</div>
<br clear="both" />
<br clear="both" />


== Help & How-Tos ==
== Recitation Resources ==
<div style="float:left; width:45%; padding-right:5%">
 
=== Technical Writing ===
<div style="float:left; width:45%; padding-right: 5%">
* [[What Is It?]]
* [[Your Audience and Purpose]]
* [[Introduction]]
* [[Lab Report Format]]
* [[Introductions and Conclusions]]
* [[Active and Passive Voice]]
* [[Creating a Logical Argument]]
* [[Descriptions - Mechanism and Process]]
* [[Writing Numbers, Units of Measure, and Equations]]
* [[Graphics in Technical Reports]]
* [[Writing Software Documentation]]
* [[How to Write an Effective Resume]]
* [[Persuasion]]
* [[Team Authoring Strategies]]
* [[Editing]]
* [[Punctuation]]
* [[The Use of Articles]]
* [[Media:WC_Grading_Rubric.docx| WC Grading Rubric]]
==== WC Presentations ====
* [[Media:How_To_Write_a_Lab_Report_in_EG_2018.pptx|How to Write Lab Reports in EG1003]]
* [[Media:passivevoice.pptx|Passive Voice]]
* [[Media:Citingsources.pptx|Citing Sources]]
* [[Media:Format_Numbers.pptx|Formatting Numbers]]
* [[Media:Capitals.pptx|Using Capital Letters]]
* [[Media:verbs.ppt|Verb Tense in Lab Reports]]
* [[Media:professionaltone.pptx|Professional Tone]]
* [[Media:Writing_an_Effective Resume.pptx|Resumes]]
* [[Media:combining.ppt|Sentence Combining]]
* [[Media:commause.ppt|Commas]]
* [[Media:Writing_Teamwork.ppt|Writing Consultant Teamwork Presentation]]
* [[Media:Introductions.ppt|Introductions]]
</div>
<div style="float:left; width:45%; padding-left:5%">


==== Sample Work ====
<!--==== Sample Work ====
This section contains two imaginary labs and typical submissions that would be associated with them.
This section contains two imaginary labs and typical submissions that would be associated with them.
* [[Introduction to the Sample Labs]]
* [[Introduction to the Sample Labs]]
Line 197: Line 227:
* [[Media:MockFPP.pptx|Final Presentation]]
* [[Media:MockFPP.pptx|Final Presentation]]
</div>
</div>
</div>
<div style="float:left; width:45%; padding-right:5%">-->
=== Weekly Presentations ===
* [[Media: REC1_EG1003.pptx|Recitation 1: What is engineering?]]
* [[Media: REC2_EG1003.pptx|Recitation 2: Technical Writing]]
* [[Media: REC3_EG1003.pptx|Recitation 3: Professional Presentations]]
* [[Media: REC4_EG1003.pptx|Recitation 4: Engineering Design Process]]
* [[Media: REC5_EG1003.pptx|Recitation 5: Software & Metacognition]]
* [[Media: REC6_EG1003_2022.pptx|Recitation 6: Engineering Ethics]]
* [[Media: REC7_EG1003.pptx|Recitation 7: Analysis & Reflection]]
* [[Media: REC8_EG1003.pptx|Recitation 8: Undergraduate Opportunities]]
* [[Media: REC9_EG1003.pptx|Recitation 9: Career Considerations]]
* [[Media: REC10_EG1003_SPRING2022.pptx|Recitation 10: Graduate School]]
<!--* [[Media: REC11_EG1003_FALL2020.pptx|Recitation 11: Emerging Engineering Topics]]
* [[Media: REC12_EG1003_FALL2020.pptx|Recitation 12: Entrepreneurial Mindset]]-->
* [[Media: REC11_EG1003.pptx|Recitation 11: Data Visualization]]
* [[Media: REC12_EG1003.pptx|Recitation 12: Emerging Engineering Topics]]
* [[Media: REC13_EG1003.pptx|Recitation 13: Entrepreneurial Mindset]]
=== Presentation Resources ===
* [[EG1003 Lab Presentation Format | Lab Presentation Format]]
<!--* [[Media:How to Give a Recitation Presentation V2.pptx|How to Give a Recitation Presentation]]
* [[Media:How to Give a Recitation Presentation (Virtual).pptx|How to Give a Recitation Presentation (Virtual)]]-->
* [[Media:HOW_TO_GIVE_A_RECITATION_PRESENTATION_Spring_2022.pptx|How to Give a Recitation Presentation]]
<!--* [[EG1003 Project Milestone Presentation Format | Milestone Presentation Format]]-->
* [[Media:HOW_TO_GIVE_A_MILESTONE_PRESENTATION_Fall_2020.pptx|How to Give a Milestone Presentation]]
<!--* [[Media:How to Give a Milestone Presentation.pptx|How to Give a Milestone Presentation]]-->
* [[Media:HOW_TO_GIVE_THE_FINAL_PROJECT_PRESENTATION_Fall_2020.pptx|How to Give a Final Presentation]]
<!--* [[Media:How to Give a Final Presentation.pptx|How to Give a Final Presentation]]-->
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== Technical Presentations ===
=== Writing Resources ===
* [[EG1003 Lab Presentation Format]]
<!--* [[What Is It?]]
* [[Media:Recitation_format.pptx|How to Give a Recitation Presentation]]
* [[Your Audience and Purpose]]
* [[EG1003 Project Milestone Presentation Format]]
* [[Persuasion]]
* [[Media:Eg_milestones.pptx|How to give a Milestone Presentation]]
* [[Creating a Logical Argument]]
* [[Media:Eg_final.pptx|How to give the Final Project Presentation]]
* [[Writing Software Documentation]]-->
* [[Giving Effective Presentations]]
 
* [[Effective Slide Formats]]
<!--* [[Introduction]]
* [[Giving the Presentation]]
* [[Lab Report Format]]
* [[Blunders to Avoid]]
* [[Introductions and Conclusions]]
* [[Active and Passive Voice]]
* [[Descriptions - Mechanism and Process]]
* [[Writing Numbers, Units of Measure, and Equations]]
* [[Graphics in Technical Reports]]-->
 
<!--* [[How to Write an Effective Resume]]
* [[Team Authoring Strategies]]
* [[Editing]]
* [[Punctuation]]
* [[The Use of Articles]]-->
 
* [[Media:EG_1003_Writing_Style_Guide.pdf| EG1003 Writing Style Guide]]
<!--* [[Media:EG_1003_Lab_11_Self_Refelction_Memo.pdf| EG1003 Lab 11 Memo and Self-Reflection]]-->
* [[Media:WC_Grading_Rubric(1).docx| WC Lab Report Rubric]]
* [[Media:WC_FDR_Rubric.docx| WC RAD & VEX FDR Rubric]]
* [[Media:WC_LEED_Report_Rubric(2).docx| WC HIR FDR (LEED Accreditation Report) Rubric]]
* [[Media:EG_1003_Sample_Lab_Report.pdf| Sample Lab Report]]
** [https://manual.eg.poly.edu/index.php/Hot_Air_Balloon_Competition Sample Lab Write-Up: Hot Air Balloon]
 
=== Writing Consultant Presentations ===
* [[Media:REC1_Writing_Lab_Reports_(1).pptx|Recitation 1: Writing Lab Reports]]
* [[Media:REC2_Citing_Sources.pptx|Recitation 2: Citing Sources]]
* [[Media:Recitation_Writing_as_an_Engineer.pptx|Recitation 3: Writing as an Engineer]]
* [[Media:Recitation_Figures_Tables_Equations.pptx|Recitation 4: Technical Writing Standards]]
* [[Media:Recitation_Storytelling.pptx|Recitation 5: Storytelling]]
* [[Media:Recitation_Data_is_Your_Story.pptx|Recitation 6: Data is Your Story]]
* [[Media:Recitation_Writing_as_a_Professional.pptx|Recitation 7: Writing as a Professional]]
* [[Media:Recitation_Team_Writing.pptx|Recitation 8: Team Writing]]
* [[Media:Recitation_Resumes.pptx|Recitation 9: Resumes]]
** [https://docs.google.com/document/d/1XTGT4QmCwtRcgVhbKvQVajm_YA3MMo5uGsR_PqRAZqo NYU Resume Guide & Samples]
** [https://tandonconnect-nyu-csm.symplicity.com/students/index.php?s=resource&ss=doclib&mode=list TandonConnect Resume Templates]
* [[Media:Recitation_Resumes_Revisted.pptx|Recitation 10: Resumes Revisited]]
* [[Media:Recitation_Cover_Letters.pptx|Recitation 11: The Art of the Cover Letter]]
* [[Media:Recitation_Writing_in_Engineering.pptx|Recitation 12: Writing in Engineering]]
</div>
</div>
<br clear="both" />
<br clear="both" />

Latest revision as of 03:42, 16 July 2022

Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the EG1003 website.

Course Information


Laboratory Experiments


Semester-Long Design Project

Project Information

Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.

Project Expectations

Project Submission



Recitation Resources


Archived Pages

Pages kept for historical purposes can be found in The Archive.

Feedback

Do you have a specific change you would like to see? Click here to let us know!


Retrieved from "http://manual.eg.poly.edu/index.php?title=Main_Page&oldid=13297"