Difference between revisions of "The Archive"
From EG1004 Lab Manual
m (→Write-ups) |
|||
| Line 13: | Line 13: | ||
=== Write-ups === | === Write-ups === | ||
* [[Introduction to 3D Printing AutoCAD|Lab 1B — Introduction to 3D Printing AutoCAD]] | * [[Introduction to 3D Printing AutoCAD|Lab 1B — Introduction to 3D Printing AutoCAD]] | ||
* [[Product Evaluation (Sensors)|Lab 3 — Product Evaluation (Sensors) (EV3) (Sections A2 and K2 Only)]] | * [[Product Evaluation (Sensors)|Lab 3 — Product Evaluation (Sensors) (EV3) (Sections A2 and K2 Only)]] | ||
* [[Product Evaluation and Quality Improvement|Lab 3 — Product Evaluation and Quality Improvement (NXT) (EGED III Only)]] | * [[Product Evaluation and Quality Improvement|Lab 3 — Product Evaluation and Quality Improvement (NXT) (EGED III Only)]] | ||
** [[Media:NXT_Green.doc|Green (NXT)]] {{bull}} [[Media:NXT_Red.doc|Red (NXT)]] {{bull}} [[Media:NXT_Yellow.docx|Yellow (NXT)]] | ** [[Media:NXT_Green.doc|Green (NXT)]] {{bull}} [[Media:NXT_Red.doc|Red (NXT)]] {{bull}} [[Media:NXT_Yellow.docx|Yellow (NXT)]] | ||
* [[Mindstorms Programming Exercise Prelab|Sensors Prelab]] | * [[Mindstorms Programming Exercise Prelab|Sensors Prelab]] | ||
* [[DNA Extraction and Gel Analysis|Lab 7 — DNA Extraction and Gel Analysis (Select Sections Only)]] | |||
** [[DNA Extraction and Gel Analysis Prelab|DNA Prelab]] | |||
* [[Electronic Filters|Lab 7 — Electronic Filters]] | |||
* [[Heat Transfer and Thermal Insulation Competition (New)|Lab 11 — Heat Transfer and Thermal Insulation Competition (New)]] | * [[Heat Transfer and Thermal Insulation Competition (New)|Lab 11 — Heat Transfer and Thermal Insulation Competition (New)]] | ||
* [[Magnetic Levitation Competition|Magnetic Levitation Competition]] | * [[Magnetic Levitation Competition|Magnetic Levitation Competition]] | ||
Revision as of 05:39, 26 February 2018
Welcome to the EG1003 Online Lab Manual Archive! The pages and downloads linked here are no longer used in the current version of the course, but are kept here for historical purposes and to avoid cluttering the Main Page.
Course Information
PowerPoint Presentations
Laboratory Experiments
Write-ups
- Lab 1B — Introduction to 3D Printing AutoCAD
- Lab 3 — Product Evaluation (Sensors) (EV3) (Sections A2 and K2 Only)
- Lab 3 — Product Evaluation and Quality Improvement (NXT) (EGED III Only)
- Sensors Prelab
- Lab 7 — DNA Extraction and Gel Analysis (Select Sections Only)
- Lab 7 — Electronic Filters
- Lab 11 — Heat Transfer and Thermal Insulation Competition (New)
- Magnetic Levitation Competition
- Microphone Design Competition
- Design Failure: Cause & Effect
- MATLAB Skill Builder
PowerPoint Presentations
- Lab 7 — DNA Extraction and Gel Analysis (Select Sections Only)
- Lab 7 — Electronic Filters
- Magnetic Levitation Competition
Semester-Long Design Project
Project Configurations
- Fall 2018 Project Configurations
- Summer 2018 Project Configurations
- Spring 2018 Project Configurations
- Fall 2017 Project Configurations
- Summer 2017 Project Configurations
- Spring 2017 Project Configurations
- Fall 2016 Project Configurations
- Summer 2016 Project Configurations
- Spring 2016 Project Configurations
- Fall 2015 Project Configurations
- Summer 2015 Project Configurations
- Spring 2015 Project Configurations
- Fall 2014 Project Configurations
- Summer 2014 Project Configurations
- Spring 2014 Project Configurations
- Fall 2013 Project Configurations
- Spring 2013 Project Configurations
- Fall 2012 Project Configurations
- Summer 2012 Project Configurations
- Spring 2012 Project Configurations
- Fall 2011 Project Configurations
- Summer 2011 Project Configurations
- Spring 2011 Project Configurations
- Fall 2010 Project Configurations
- Summer 2010 Project Configurations
- Spring 2010 Project Configurations
- Fall 2009 Project Configurations
- Summer 2009 Project Configurations
- Spring 2009 Project Configurations
- Fall 2008 Project Configurations
Write-ups
- Disaster Relief Robot (DRR)
- Ice Station Autonomous Robot (ISAR)
- Railroad Train Guidance System (RTGS)
- Supermarket Logistics System (SLS)
- Autonomous Underwater Vehicle (AUV) - on hiatus
Benchmark Assessment A Forms
AUV • BDR • DRR • MRR • RDS • RTGS • SID • SLS • SRR
Benchmark Assessment B Forms
AUV • BDR • DRR • MRR • RDS • RTGS • SID • SLS • SRR
Commissioning Forms
AUV • BDR • DRR • MRR • RDS • RTGS • SID • SLS • SRR
Project Submission
Help & How-Tos
Technical Writing
WC Presentations
Sample Work
This section contains two imaginary labs and typical submissions that would be associated with them.
Regular Lab
Competition Lab
Design Project
This section is still under construction. Sample SLDP documents will be posted as they become available.
Technical Presentations
Semester-Long Design Project
Miscellaneous
- Submitting EG1003 Work to the Digital Dropbox
- How to Clean Up Your Initial "MyPoly" Screen
- How to read documents made in Office 2007 in Office 2003
- How to Capture PC Screen Images
- How to Compress Your Files
- How to Include Pictures, Equations, and Spreadsheets in Your Presentations and Lab Reports
- How to Change Pictures so They Don't Take Up So Much Space
- How to Put Video Files in presentations
- How to Troubleshoot Lab Equipment
- Introduction to NI-ELVIS
- How to Embed Microsoft Excel Objects in Other Microsoft Office Products
Previous Editors
Serge Pomorski
Prof. Dr. David R Doucette
Jacek Ortiz-Blizinski
Peter Yuk Li