Difference between revisions of "Main Page"

From EG1004 Lab Manual
Jump to: navigation, search
 
Line 1: Line 1:
<h1>Table of contents</h1>
Welcome to the EG1004 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the [http://eg.poly.edu EG1004 website].
Welcome to the EG1004 Online Manual Web site. This site contains all the academic material you need for the course. For administrative matters the Web site is [http://eg.poly.edu eg.poly.edu].


You can click on anything underlined on this page to link to the material.
For information on the [[Elementary General Engineering & Design]] program for high schoolers, visit [[Elementary General Engineering & Design|their landing page]].


<h2>Perspectives on EG1004</h2>
== Course Information ==
<ul><li>[[Some comments from the course director]]</ul>
<div style="float:left; width:45%; padding-right: 5%">
=== Getting Started ===
* [[Our Mission]]
* [[Course Structure]]
* [[How to Use the Course Websites]]
* [[Software Requirements]]


<h2>Success in EG1004</h2>
<ul><li>[[The Course]]
<li>[[Structure]]
<li>[[Missing and Being Late for Class, and How to Make Up Work]]
<li>[[Teamwork]]
<li>[[Ethics]]
<li>[[Plagiarism]]
</ul>


<h2>Introduction to EG1004</h2>
<ul>
<li>[[How to use the EG1004 Web Sites]]
<li>[[How to submit work to the EG1004 Web Site]]
<li>[[EG1004 Grading Policy]]
<li>[[Safety Guidelines]]
<li>[[Keeping Your Laboratory Notebook]]
</ul>


<h2>Laboratory Experiments</h2>
</div>
<ul>
<div style="float:left; width:45%; padding-left:5%">
<li>[[Introduction to Engineering Computing Skills|Lab 1 - Software for Engineers I]]
<li>[[Mousetrap Car|Lab 1A - Mousetrap Car]]
<li>[[Hot Air Balloon|Lab 2 - Hot Air Balloon]]
<li>[[Hardware Analysis and Synthesis|Lab 3 - Product Evaluation]]
<ul>
<li>[[Media:NXT_Green.doc|NXT Green Chassis Assembly Instructions]]</li>
<li>[[Media:NXT_Red.doc|NXT Red Chassis Assembly Instructions]]</li>
<li>[[Media:NXT_Yellow.doc|NXT Yellow Chassis Assembly Instructions]]</li>
</ul>
<li>[[Reverse Engineering|Lab 4 - Reverse Engineering]]
<li>[[Introduction to LabVIEW|Lab 5 - Introduction to LabVIEW]]
<li>[[Digital Logic|Lab 6 - Digital Logic]]
<li>[[Prelab Sensors|Preparation for Sensors Lab, due at beginning of Sensors Lab]]
<li>[[Sensors|Lab 7 - Sensors]]
<li>[[Heat Transfer and Thermal Insulation|Lab 8 - Heat Transfer and Thermal Insulation]]
<li>[[Lemon Car|Lab 9 - Lemon Car]]
<li>[[Electronic Filters|Lab 10 - Electronic Filters]]</li>
<li>[[Boom Construction Competition|Lab 11 - Boom Construction Competition]]</li>
</ul>


<h2>Laboratory Experiment Presentations</h2>
=== Policies and Procedures  ===
<ul>
<!--* [[Media:INTRODUCTION_TO_EG1003_Summer|Introduction to EG1004]]-->
<li>[[Media:SW_For_EngrsI.ppt|Lab 1 - Software for Engineers I]]
*[[Media:REC1_Introduction_to_EG_1004.pptx|Introduction to EG1004]]
<li>[[Media:MouseTrap.ppt|Lab 1A - Mousetrap Car]]
* [[Media:EG_1004_Syllabus.pdf| EG1004 Syllabus]]
<li>[[Media:Balloon.ppt|Lab 2 - Hot Air Balloon]]
* [https://eg.poly.edu/syllabus.php EG1004 Schedules]
<li>[[Media:HW_Anal_and_Synth.ppt|Lab 3 - Product Evaluation]]
* [[Media:Intro_to_Lab.pptx|Introduction to EG1004 Lab]]
<li>[[Media:Reverse_Engg.ppt|Lab 4 - Reverse Engineering]]
* [[Media:Safety_Guidelines_Updated.pptx|Safety Guidelines]]
<li>[[Media:LabVIEW.ppt|Lab 5 - Introduction to LabVIEW]]
* [[Media:REC1_Proper_Sourcing_and_Academic_Integrity.pptx|Proper Sourcing and Academic Integrity]]
<li>[[Media:Digital_Logic.ppt|Lab 6 - Digital Logic]]
* [[EG Grading Policy | Grading Policy]]
<li>[[Media:Sensors.ppt|Lab 7 - Sensors]]
* [[Absence and Lateness Policies]]
<li>[[Media:Heatxfer.ppt|Lab 8 - Heat Transfer and Thermal Insulation]]
<li>[[Media:Lemon_car.ppt|Lab 9 - Lemon Car]]
<li>[[Media:Electronic_Filters.ppt|Lab 10 - Electronic Filters]]
<li>[[Media:Boom.ppt|Lab 11 - Boom Construction Competition]]
</ul>


<h2>Instructional Web Pages</h2>
</div>
<ul>
<br clear="both" />
<li>[[Screenshots|How to Capture PC Screen Images]]</li>
<li>[[How to Compress Your Files]]</li>
<li>[[How to Include Pictures, Equations, and Spreadsheets in Your Presentations and Lab Reports]]</li>
<li>[[How to Change Pictures so They Don’t Take Up So Much Space]]</li>
<li>[[Making Good Looking Equations in PowerPoint Presentations]]</li>
<li>[[How to Handle Unusual Data]]</li>
<li>[[How to Show Cost Data in Presentations]]</li>
<li>[[Submitting EG1004 Work to the Digital Dropbox]]</li>
<li>[[How to Clean Up Your Initial “MyPoly�? Screen]]</li>
<li>[[AutoCAD Skill Builder]]</li>
</ul>


<h2>Instructional Presentations</h2>
== Laboratory Experiments ==
<ul>
<div style="float:left; width:45%; padding-right: 5%">
<li>[[Media:Introduction_to_EG.ppt|Introduction to EG1004]] (348KB)
=== Write-ups ===
<li>[[Media:Academic_honesty.ppt|Academic Honesty and Plagiarism]] (99KB)
* Lab 1
<li>[[Media:Safety_Guidelines.ppt|Safety Guidelines]] (358KB)
** [[Lab 1A: Introduction to Prototype Development]]
<li>[[Media:How_To_Write_a_Lab_Report_in_EG.ppt|How to Write Lab Reports in EG1004]] (93.5KB)
** [[Introduction to Revit | Lab 1B: Introduction to Revit]]
<li>[[Media:Recitation_format.ppt|How to Give a Recitation Presentation]] (233KB)
*** [https://docs.google.com/document/d/1v0ojKQ_j7qIYh9rDMHyZc75gHocSlXBwlPl1x4MDvH0/edit?usp=sharing Ideation Template]
<li>[[Media:Eg_milestones.ppt|How to give a Milestone Presentation]] (389KB)
<li>[[Media:Eg_final.ppt|How to give the Final Project Presentation]] (356KB)
<li>[[Media:Independent_Project.zip|Semester-Long Project Presentation]] (zip file) <font color=#ff000><b>Warning! 54MB file!</b></font></li>
<li>[[Media:Writing_Teamwork.ppt|Writing Consultant Teamwork Presentation]] (156KB)
<li>[[Media:MLCAD.zip|Installing and Using MLCAD]] (zip file - 2.3MB)</li>
<li>[[Media:Exporting_AutoCad_to_MLCAD_.ppt|Exporting MLCAD to AutoCAD]] (395KB)</li>
<li>[[Media:Writing_an_Effective Resume.ppt|Writing an Effective Resume]] (127KB)</li>
</ul>


<h2>Semester-Long Projects</h2>
* Lab 2
<ul>
** [[Computer Aided Design (CAD) Competition|Lab 2 &mdash; Computer-Aided Design Competition]]
<li>[[Bomb Disarming Robot (BDR)]]
*** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
<li>[[Retrieval and Delivery System (RDS)]]
<li>[[Ice Station Autonomous Robot (ISAR)]]
<li>[[Railroad Train Guidance System]]
<li>[[Supermarket]]
<li>[[Autonomous Underwater Vehicle]]
<li>[[Modular Field]]
</ul>


<h2>Material to help you with the project</h2>
* Lab 3: Model Shop Session 1
<ul>
** [[RAD Workshop|Lab 3A &mdash; RAD Workshop]]
<li>[[MS Project Skill Builder]]
** [[HIR Workshop|Lab 3B &mdash; HIR Workshop]]
<li>[[How to plan the schedule and calculate costs for a project]]</li>
<li>[[Media:Legoprice.pdf|Price list for Lego parts for robot projects]]</li>
</ul>


<h2>Project Forms</h2>
* Lab 4
** [[Boom Construction Competition|Lab 4 &mdash; Boom Construction Competition]]


<h3>Component Testing Forms</h3>
* Lab 5: Model Shop Session 2
** [[Required Pre-Lab Activity|Lab 5 &mdash; Required Pre-Lab Activity]]


<ul>
* Lab 6
<li>[[Media:Bdrcomp.doc|Bomb Disarming Robot (BDR)]]</li>
** [[Investigating CO2 Production of Yeast |Lab 6 &mdash; Investigating CO2 Production of Yeast]]
<li>[[Media:Rdscomp.doc|Retrieval and Delivery System (RDS)]]</li>
<li>[[Media:Isarcomp.doc|Ice Station Autonomous Robot (ISAR)]]</li>
<li>[[Media:Traincomp.doc|Railroad Train Guidance System (RTGS)]]</li>
<li>[[Media:Smktcomp.doc|Supermarket]]</li>
</ul>


<h3>Commissioning Forms</h3>
*Lab 7
** [[Introduction to Digital Logic|Lab 7 &mdash; Construction of a Simple Alarm System Using Digital Logic]]


<ul>
* Lab 8
<li>[[Media:Bdrcomm.pdf|Bomb Disarming Robot (BDR)]]</li>
** Lab 8 &mdash; Model Shop Session 3
<li>[[Media:Rdscomm.pdf|Retrieval and Delivery System (RDS)]]</li>
<li>[[Media:Isarcomm.pdf|Ice Station Autonomous Robot (ISAR)]]</li>
<li>[[Media:Traincomm.doc|Railroad Train Guidance System (RTGS)]]</li>
<li>[[Media:Smktcomm.doc|Supermarket]]</li>
</ul>


<h3>Early Submission Form</h3>
* Lab 9
** [[Sustainable Energy Vehicle Competition|Lab 9 &mdash; Sustainable Energy Vehicle Competition]]
** [[Digital Multimeters Guidelines]]


<ul>
* Lab 10
<li>[[Media:Early.doc|Early Submission Form - all projects]]</li>
** [[Processes & Water Filters|Lab 10 &mdash; Processes & Water Filters Competition]]  
</ul>


<h2>Helpful Links</h2>
* Lab 11: Model Shop Session 4
<ul>
<li>[http://www.lm-software.com/mlcad/e_main.htm MLCad Web site, including tutorials]</li>
</ul>


<h2>Introduction to Technical Presentations</h2>
* Lab 12: Model Shop Session 5
<ul>
<li>[[Giving Effective Presentations]]
<li>[[Effective Slide Formats]]
<li>[[Giving the Presentation]]
<li>[[Blunders to Avoid]]
<li>[[EG1004 Lab Presentation Format]]
<li>[[EG1004 Project Milestone Presentation Format]]
</ul>


<h2>Introduction to Technical Communication</h2>
</div>
<ul>
<div style="float:left; width:45%; padding-left:5%">
<li>[[What Is It?]]
<li>[[Your Audience and Purpose]]
</ul>


<h2>Technical Communication</h2>
=== PowerPoint Presentations ===
<ul><li>[[Introduction]]
* Lab 1
<li>[[Specifications for Writing Your Lab Reports]]
** [https://docs.google.com/presentation/d/1Q7wNRiqrNAs0-xkHpB0YfyC_J7i4YgCNtRvtSzCHRP8/pub?start=false&loop=false&delayms=60000 Lab 1 &mdash; Intro to SLDP] ([https://docs.google.com/presentation/d/1Q7wNRiqrNAs0-xkHpB0YfyC_J7i4YgCNtRvtSzCHRP8/export?format=pdf pdf])
<li>[[Introductions and Conclusions]]
** [https://docs.google.com/presentation/d/1FdHtXX8AXMkaBR9JDnx2m9zgCFAMv6wOrnA6EeQTY7A/pub?start=false&loop=false&delayms=60000 Lab 1A &mdash; Intro to Prototype Development] ([https://docs.google.com/presentation/d/1FdHtXX8AXMkaBR9JDnx2m9zgCFAMv6wOrnA6EeQTY7A/export?format=pdf pdf])
<li>[[Active and Passive Voice]]
** [https://docs.google.com/presentation/d/1J65NDal2BEQjzMLOu2YzDEX2jhMzK6xcmfYNnQaWY70/pub?start=false&loop=false&delayms=60000 Lab 1B &mdash; Intro to HIR Revit] ([https://docs.google.com/presentation/d/1J65NDal2BEQjzMLOu2YzDEX2jhMzK6xcmfYNnQaWY70/export?format=pdf pdf])
<li>[[Creating a Logical Argument]]
* Lab 2
<li>[[Descriptions - Mechanism and Process]]
** [https://docs.google.com/presentation/d/1dtuyr0qTyJ8ouNq_mc8uVlBLoZEVVDzri_UTwKFrPFg/pub?start=false&loop=false&delayms=60000 CAD Competition] ([https://docs.google.com/presentation/d/1dtuyr0qTyJ8ouNq_mc8uVlBLoZEVVDzri_UTwKFrPFg/export?format=pdf pdf])
<li>[[Writing Numbers, Units of Measure, and Equations]]
* Lab 3
<li>[[Graphics in Technical Reports]]
** [https://docs.google.com/presentation/d/1RK16LZQEqtzFKVZnarv9clMcL3-cnSN5xLciomZJoSo/pub?start=false&loop=false&delayms=60000 Lab 3A &mdash; RAD Workshop] ([https://docs.google.com/presentation/d/1RK16LZQEqtzFKVZnarv9clMcL3-cnSN5xLciomZJoSo/export?format=pdf pdf])
<li>[[Writing Software Documentation]]
** [https://docs.google.com/presentation/d/1tHdy2rlvRgFwEsgPK3Si7MGp0tSk_nOPqne41-WrLys/pub?start=false&loop=false&delayms=3000 Lab 3B &mdash; HIR Workshop] ([https://docs.google.com/presentation/d/1tHdy2rlvRgFwEsgPK3Si7MGp0tSk_nOPqne41-WrLys/export?format=pdf pdf])
<li>[[Instructions for Preparing your Final Proposal Cover Letter]]
* Lab 4
<li>[[Final Proposal Cover Letter Guidelines]]
** [https://docs.google.com/presentation/d/e/2PACX-1vQZsCDEpP4TIzp-The1EQGN3jdSAnASqTDwkYOvOSa9LRyPgUgQfovp3IDo725-CLsJoZ9tDCP2PxoE/pub?start=false&loop=false&delayms=3000 Lab 4 &mdash; Boom Construction Competition] ([https://docs.google.com/presentation/d/1PbxbDkvT8iRW5AANpOCt7LRPQKzlDrgUl0da-iYldOY/export?format=pdf pdf])
<li>[[How to Write an Effective Resume]]
* Lab 5
<li>[[Persuasion]]
** Lab 5 &mdash; Model Shop Session 2
<li>[[Team Authoring Strategies]]
* Lab 6
<li>[[Editing]]
** [https://docs.google.com/presentation/d/e/2PACX-1vR4CJdVafjo11D-ImwmqfxvmyWz9ZGKAP8OnILPlD_FTIIOD4kmOIT-XU_PT0809jvPkdmRlnHrhb0E/pub?start=false&loop=false&delayms=3000 Lab 6 &mdash; Investigating CO2 Production of Yeast] ([https://docs.google.com/presentation/d/1R2Z4mh7czNRknUtoZI4fikLi-oPQFgfTM-LMf-kBFe4/export?format=pdf pdf])
<li>[[Punctuation]]
* Lab 7
<li>[[The Use of Articles]]
** [https://docs.google.com/presentation/d/e/2PACX-1vQiXfirihaU3E7zOJeWweGC2tRiReCpOVHPTg-NW-dLIOAyd9pRqTReEQQ1CxDGRX3TH7S9XX7WqhQK/pub?start=false&loop=false&delayms=3000 Lab 7 &mdash; Construction of a Simple Alarm System Using Digital Logic] ([https://docs.google.com/presentation/d/1HlXAOh5v6_yPDD-HZslixW_XaPlx6-dVn3SEPGi9hKc/export?format=pdf pdf])
</ul>
* Lab 8
** Lab 8 &mdash; Model Shop Session 3
* Lab 9
** [[Media:Lab_Sustainable_Energy_Vehicle_Competition.pptx|Lab 9 &mdash; Sustainable Energy Vehicle]]
* Lab 10
** [[Media: 2023_Lab_Processes_and_Water_Filters.pptx |Lab 10 &mdash; Processes & Water Filters]]
* Lab 11
** Lab 11 &mdash; Model Shop Session 4
* Lab 12
** Lab 11 &mdash; Model Shop Session 5
</div>
<br clear="both" />


<h2>Sample Labs</h2>
== Semester-Long Design Project ==
<div style="float:left; width:45%; padding-right: 5%">
=== Project Information ===
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''


<p>This section contains two imaginary labs and typical submissions that would be associated with them</p>
* [https://docs.google.com/presentation/d/178DiAfKopgsFvu0lRvU9Exu9RA9Ij8Q0Nr98Un6m7zQ/pub?start=false&loop=false&delayms=3000 Introduction to the Semester-Long Design Projects (SLDPs)]([https://docs.google.com/presentation/d/178DiAfKopgsFvu0lRvU9Exu9RA9Ij8Q0Nr98Un6m7zQ/export?format=pdf pdf])
<ul>
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly & Design Challenge]]
<li>[[Introduction to the Sample Labs]]
* [[Housing and Innovation in Revit (HIR)|Housing & Innovation in Revit]]
</ul>
** [[Revit-How-To Guide]]  
<h3>Regular Lab</h3>
** [[HIR - Architectural Styles Guide]]
<ul>
<li>[[Lab 1701|Lab 1701 - Faster-than-light Travel]]</li>
<li>[[Media:Eglabrpt1701a.doc|Annotated lab report]]</li>
<li>[[Media:Eglabrpt1701.doc|Lab report]]</li>
<li>[[Media:Lab1701a.ppt|Annotated presentation]]</li>
<li>[[Media:Lab1701.ppt|Presentation]]</li>
</ul>
<h3>Competition Lab</h3>
<ul>
<li>[[Lab 500|Lab 500 - Stock Car Racer]]</li>
<li>[[Media:Eglabrpt500a.doc|Annotated lab report]]</li>
<li>[[Media:Eglabrpt500.doc|Lab report]]</li>
<li>[[Media:Lab500a.ppt|Annotated presentation]]</li>
<li>[[Media:Lab500.ppt|Presentation]]</li>
</ul>


<h2>EG1004 Specification Comparison</h2>
=== Project Requirements ===
<ul>
* [[Engineering_Notebook|Engineering Notebook]]
<li>[[Quick Comparison of Lab Presentation and Report Specifications]]
* [[Teamwork Expectations]]
</ul>
* [[Career Development]]
</div>
<div style="float:left; width:45%; padding-left:5%">


<h2>Feedback</h2>
=== Help & How-Tos ===
==== General SLDP ====
* [[Media:Teamwork_Agreement.docx|Teamwork Agreement]]
* [[Media:Microsoft_Project_Student_Guide.pptx|Microsoft Project Student Guide]]
* [[Planning Project Scheduling & Costs]]
* [[How to Show Cost Data in Presentations]]
* RAD Purchasing Documents
** [https://docs.google.com/forms/d/e/1FAIpQLSche7g-wEZNKIkieQT71gYKYot-ujC1da0PTmoymKzizK4ByA/viewform RAD Purchasing Request Form]
** [https://docs.google.com/document/d/1R4C83D7Wy9Ysyb43ahIf4N7tDg7OQBevwG4_zE17ID8/edit?usp=sharing Non-Permissible RAD Purchases]
** [https://docs.google.com/document/d/1cof5ZCWt_c6CYlQV6nC4v1weuLlSZg7_Lmt8rS2g_NY/edit Common RAD Materials and Costs]


<p>If you have an comments are questions about this manual
==== Prototyping Resources ====
[click here > mailto:doucette@poly.edu] to send us a message.</p>
* [[3D Printing and Logo Guide]]
* [[Bambu Studio Guide]]
* [[Prototyping Guide]]
* [[Virtual Circuit Simulation Guide]]
* [[Arduino Coding Guide]]
* [[Sensors Guide]]
 
==== VEX Resources ====
* [[VEX How-To Manual]]
* <!--[[VEX Building Guide]]
* [[VEX CAD Assembly Guide]]
* [[VEX Library Guide]] -->
* [[VEX Lift & Claw Design Guide]]
* [[Media:Vex_Price_Sheet.xlsx|Price list for VEX parts for robot projects]]
</div>
<br clear="both" />
 
== Recitation Resources ==
 
<div style="float:left; width:45%; padding-right: 5%">
 
<!--==== Sample Work ====
This section contains two imaginary labs and typical submissions that would be associated with them.
* [[Introduction to the Sample Labs]]
<div style="float:left; width:45%; padding-right:5%">
===== Regular Lab =====
* [[Lab 1701|Lab 1701 - Faster-than-light Travel]]
* [[Media:Lab1701a.pdf|Annotated lab report]]
* [[Media:Lab1701a.ppt|Annotated presentation]]
* [[Media:Lab1701.ppt|Presentation]]
 
===== Competition Lab =====
* [[Lab 500|Lab 500 - Stock Car Racer]]
* [[Media:Eglabrpt500a.pdf|Annotated lab report]]
* [[Media:Lab500a.ppt|Annotated presentation]]
* [[Media:Lab500.pptx|Presentation]]
</div>
<div style="float:left; width:45%; padding-left:5%">
 
===== Design Project =====
This section is still under construction. Sample SLDP documents will be posted as they become available.
* [[Media:MockMS1.pptx|Milestone 1]]
* [[Media:MockMS2.pptx|Milestone 2]]
* [[Media:MockMS3.pptx|Milestone 3]]
* [[Media:MockFPP.pptx|Final Presentation]]
</div>
</div>
<div style="float:left; width:45%; padding-right:5%">-->
=== Engineering Faculty Presentations ===
* [https://docs.google.com/presentation/d/139w4PU4a6SGgd1qGKYw7pSdiDrf45QeC1vZYWn_oux8/pub?start=true&loop=true&delayms=60000 Recitation 1: Emerging Global Topics]([https://docs.google.com/presentation/d/139w4PU4a6SGgd1qGKYw7pSdiDrf45QeC1vZYWn_oux8/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1E9v_oq7fHDdtPYSlzosnqi1XeJJ8fAUxKwXZQISQAc4/pub?start=true&loop=true&delayms=60000 Recitation 2: The Engineering Design Process]([https://docs.google.com/presentation/d/1E9v_oq7fHDdtPYSlzosnqi1XeJJ8fAUxKwXZQISQAc4/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/16dTBZurl0oSGM_nWRFSW3HfQda--nlvdtCube04rAZM/pub?start=true&loop=true&delayms=60000 Recitation 3: Scientific Writing]([https://docs.google.com/presentation/d/16dTBZurl0oSGM_nWRFSW3HfQda--nlvdtCube04rAZM/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1rl3V8is5bxPoKsrv4d0W7nBriakjmSsiwIrkwYqRT7E/pub?start=true&loop=true&delayms=60000 Recitation 4: Teamwork and Project Management]([https://docs.google.com/presentation/d/1rl3V8is5bxPoKsrv4d0W7nBriakjmSsiwIrkwYqRT7E/export?format=pdf pdf)]
* [https://docs.google.com/presentation/d/1tdktOTCLv4WIl09jeBKBt4ibeYNjqm7GrDSVKGdrCZ8/pub?start=true&loop=true&delayms=60000 Recitation 5: Undergraduate Opportunities & Graduate School]([https://docs.google.com/presentation/d/1tdktOTCLv4WIl09jeBKBt4ibeYNjqm7GrDSVKGdrCZ8/export?format=pdf pdf)]
* [https://docs.google.com/presentation/d/1HaIDMlg618zsnwqzyL7NqY9_I4M681F5g0hrF7LuBVY/pub?start=true&loop=true&delayms=60000 Recitation 6: Career Advice & Elevator Pitch]([https://docs.google.com/presentation/d/1HaIDMlg618zsnwqzyL7NqY9_I4M681F5g0hrF7LuBVY/export?format=pdf pdf)]
* [https://docs.google.com/presentation/d/1xfdgKQIVZDgbqHnpCm7D9lYgYMt602Xnk7eW3xHeoNk/pub?start=true&loop=true&delayms=60000 Recitation 7: Ethics & Stakeholder Impact]([https://docs.google.com/presentation/d/1xfdgKQIVZDgbqHnpCm7D9lYgYMt602Xnk7eW3xHeoNk/export?format=pdf pdf)]
* [https://docs.google.com/presentation/d/1YGO4OFCq_p7nHey0HC6-HHSMj4bFFUN7M0DEALrr6mk/pub?start=true&loop=true&delayms=60000 Recitation 8: Entrepreneurship at NYU]([https://docs.google.com/presentation/d/1YGO4OFCq_p7nHey0HC6-HHSMj4bFFUN7M0DEALrr6mk/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1OhxLN21q0SRY2CLjvFIbWGlOSbMR64ipF_-U4RXCWpg/pub?start=true&loop=true&delayms=60000 Recitation 9: Engineering & Social Justice]([https://docs.google.com/presentation/d/1OhxLN21q0SRY2CLjvFIbWGlOSbMR64ipF_-U4RXCWpg/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1Pddif82yIBqmAEseXgI6ylXCcyw1cnT_DYga5VIYmZE/pub?start=true&loop=true&delayms=60000 Recitation 10: Research Posters]([https://docs.google.com/presentation/d/1Pddif82yIBqmAEseXgI6ylXCcyw1cnT_DYga5VIYmZE/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1gZsA6ChWTtRPQVIg3ztgkXs6a_8UfVFfoMb9OVWe-Bw/pub?start=true&loop=true&delayms=60000 Recitation 11: AI/ML & The Future of Engineering]([https://docs.google.com/presentation/d/1gZsA6ChWTtRPQVIg3ztgkXs6a_8UfVFfoMb9OVWe-Bw/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1j-bX-vre06ZjTkll7qFRBb9LrypQfppEneugznuwTh4/pub?start=true&loop=true&delayms=60000 Recitation 12: Semester in Review]([https://docs.google.com/presentation/d/1j-bX-vre06ZjTkll7qFRBb9LrypQfppEneugznuwTh4/export?format=pdf pdf])
 
=== Student Presentation Resources ===
* [[EG1004 Lab Presentation Format | Lab Presentation Format]]
* [https://docs.google.com/presentation/d/1ELqW_d03lgZeSJnrJoNt3DJok-g55FP3t7NUP2I6fIg/pub?start=false&loop=false&delayms=60000 How to Give a Recitation Presentation]([https://docs.google.com/presentation/d/1ELqW_d03lgZeSJnrJoNt3DJok-g55FP3t7NUP2I6fIg/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1jiN2_soKyuD__NOQsVp42-kIy8QUeLU51O1bBEsGJ1g/pub?start=false&loop=false&delayms=60000 How to Give a Milestone Presentation]([https://docs.google.com/presentation/d/1jiN2_soKyuD__NOQsVp42-kIy8QUeLU51O1bBEsGJ1g/export?format=pdf pdf])
* How to Give a Final Presentation
 
</div>
<div style="float:left; width:45%; padding-left:5%">
 
=== Writing Professor Presentations ===
* [https://docs.google.com/presentation/d/1lXFwbSYIsFWsOyV2DnFa5hTbBV-v-CXzP9oCv52Ukmc/pub?start=false&loop=false&delayms=3000 Recitation 1: Technical Writing Values]([https://docs.google.com/presentation/d/1lXFwbSYIsFWsOyV2DnFa5hTbBV-v-CXzP9oCv52Ukmc/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1c_RUT7EQzk0hPN26xIw1SVJZhLjB9CwwZn0VBqEEOJo/pub?start=false&loop=false&delayms=3000 Recitation 2: Writing Lab Reports]([https://docs.google.com/presentation/d/1di743mbaOsLipiX1KiTDsJfSZ3zbjWlWSyIj8rjkJxc/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/1cp_KrO60xen7JgqHOgNIa0UcZhD-kDhODG4IMjwvXPM/pub?start=false&loop=false&delayms=60000 Recitation 3: Introduction to the Final Design Report]([https://docs.google.com/presentation/d/1cp_KrO60xen7JgqHOgNIa0UcZhD-kDhODG4IMjwvXPM/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/e/2PACX-1vR0-eU9Y6m6_-sppDpHVyxlIKRb_DfocS8B85ZRyaDKudVJ-EQKClsLFIDr6p2FR-bP7-Z3QHHYMud1/pub?start=false&loop=false&delayms=60000 Recitation 4: Team Writing]([https://docs.google.com/presentation/d/10J5uR3lH2vFaFlmw0QKEtbAkl0RQeO_a9DVQr28NC4o/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/e/2PACX-1vQsuaaPoSbA8ZQg8o9_Hi1uTNCsyJv_fsA63i6eHsVD9Ykw6enA5F6KdQfCQysJLvX45J5NMVNLcZAo/pub?start=false&loop=false&delayms=60000 Recitation 5: Career Development] ([https://docs.google.com/presentation/d/1H4ONA248LUbWE-4XLVnBh9_6lT_GlezGQjK6_ybnbnk/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/e/2PACX-1vQiCvixlvfA-I5rk9eFH7W-mgccL0QubekPF_oJDAu2TkuB999NAkRMDH0CYDfGmMTXBuv9peWGZB3B/pub?start=false&loop=false&delayms=60000 Recitation 6: Launching Your Job Search] ([https://docs.google.com/presentation/d/1XHTZ9u7UwEokzeVjOGld5x8f9kuxO2VLQMK9oUbv9jk/export?format=pdf pdf])
* [https://docs.google.com/presentation/d/e/2PACX-1vROH1C9vY4GbxWIfXg8Q-HIrRg8-XCVWdpEjchgnf1LWX7Gw-fO1q-VEDnbYZbMWXim2Z4VfwmBty6w/pub?start=false&loop=false&delayms=60000 Recitation 7: After You Graduate] ([https://docs.google.com/presentation/d/1UAsPo57pLHIvZJrj6fFYg_K6JCAgZ1MBDintVmsGCZg/export?format=pdf pdf])
* Recitation 9: Technical Writing & Social Justice
 
=== Student Writing Resources ===
 
* [https://drive.google.com/file/d/13gKuFtaMdl3RkYa4GCdW76MYdGA9hEi1/view?usp=drive_link Writing Style Guide]
* [https://drive.google.com/file/d/156BU-IJAaQDBWIv6XYPUS8ezJOf4tJSM/view?usp=drive_link Creating Equations, Tables, and Graphs]
* [[Media:WC_Grading_Rubric.docx| WP Lab Report Rubric]]
* [[Media:WC_FDR_Rubric.docx| WP RAD & VEX FDR Rubric]]
* [[Media:WC_LEED_Report_Rubric.docx| WP HIR FDR (LEED Accreditation Report) Rubric]]
* [https://drive.google.com/file/d/1TRQEfaUKCGQxya1pwECGiiPScj_elam_/view?usp=drive_link Sample Lab Report]
** [https://manual.eg.poly.edu/index.php/Hot_Air_Balloon_Competition Sample Lab Write-Up: Hot Air Balloon]
* [https://docs.google.com/document/d/1XTGT4QmCwtRcgVhbKvQVajm_YA3MMo5uGsR_PqRAZqo NYU Resume Guide & Samples]
* [https://drive.google.com/file/d/13zGunO-BpzlLa2QlwIaMNVeIy81qKH_b/view?usp=drive_link Sample Cover Letter]
 
 
</div>
<br clear="both" />
 
== Archived Pages ==
Pages kept for historical purposes can be found in [[The Archive]].
 
== Feedback ==
Do you have a specific change you would like to see? [https://docs.google.com/forms/d/e/1FAIpQLSdgxEiYatlAqpXqnqpeBQ2dUkAUiMXziUQpqXRLlNrNjtaA7w/viewform?usp=sf_link Click here to let us know!]
 
<!--If you have any comments or questions about this manual [mailto:editor@eg.poly.edu click here to send us a message]. Please include something in the subject line indicating what your comment is.-->

Latest revision as of 00:11, 21 October 2024

Welcome to the EG1004 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the EG1004 website.

For information on the Elementary General Engineering & Design program for high schoolers, visit their landing page.

Course Information


Laboratory Experiments


Semester-Long Design Project

Project Information

Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.

Project Requirements


Recitation Resources


Archived Pages

Pages kept for historical purposes can be found in The Archive.

Feedback

Do you have a specific change you would like to see? Click here to let us know!


Retrieved from "https://manual.eg.poly.edu/index.php?title=Main_Page&oldid=15591"