Difference between revisions of "Main Page"

From EG1004 Lab Manual
Jump to: navigation, search
 
Line 1: Line 1:
Welcome to the EG1004 Online Manual Web site. This site contains all the academic material you need for the course. For administrative matters the Web site is [http://eg.poly.edu eg.poly.edu].
Welcome to the EG1004 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the [http://eg.poly.edu EG1004 website].


You can click on anything underlined on this page to link to the material.
For information on the [[Elementary General Engineering & Design]] program for high schoolers, visit [[Elementary General Engineering & Design|their landing page]].


== Perspectives on EG1004 ==
== Course Information ==
* [[Some comments from the course director]]
<div style="float:left; width:45%; padding-right: 5%">
=== Getting Started ===
* [[Our Mission]]
* [[Course Structure]]
* [[How to Use the Course Websites]]
* [[Software Requirements]]


== Success in EG1004 ==
* [[The Course]]
* [[Structure]]
* [[Missing and Being Late for Class, and How to Make Up Work]]
* [[Teamwork]]
* [[Ethics]]
* [[Plagiarism]]


== Introduction to EG1004 ==
* [[How to use the EG1004 Web Sites]]
* [[How to submit work to the EG1004 Web Site]]
* [[EG1004 Grading Policy]]
* [[Safety Guidelines]]
* [[Keeping Your Laboratory Notebook]]


== Laboratory Experiments ==
</div>
* [[SW for Engrs I O2007|Lab 1 - Software for Engineers I (Office 2007 Version)]]
<div style="float:left; width:45%; padding-left:5%">
* [[Mousetrap Car|Lab 1A - Mousetrap Car]]
* [[Hot Air Balloon|Lab 2 - Hot Air Balloon]]
* [[Hardware Analysis and Synthesis|Lab 3 - Product Evaluation]]
** [[Media:NXT_Green.doc|NXT Green Chassis Assembly Instructions]]
** [[Media:NXT_Red.doc|NXT Red Chassis Assembly Instructions]]
** [[Media:NXT_Yellow.doc|NXT Yellow Chassis Assembly Instructions]]
* [[Reverse Engineering|Lab 4 - Reverse Engineering]]
* [[Introduction to LabVIEW|Lab 5 - Introduction to LabVIEW]]
* [[Digital Logic|Lab 6 - Digital Logic]]
* [[Prelab Sensors|Preparation for Sensors Lab, due at beginning of Sensors Lab]]
* [[Sensors|Lab 7 - Sensors]]
* [[Heat Transfer and Thermal Insulation|Lab 8 - Heat Transfer and Thermal Insulation]]
* [[Lemon Car|Lab 9 - Lemon Car]]
* [[Electronic Filters|Lab 10 - Electronic Filters (Sections A, B, and D Only)]]
* [[Prelab DNA|Preparation for DNA Extraction Lab, due at beginning of DNA Extraction Lab]]
* [[DNA Extraction|Lab 10 - DNA Extraction and Gel Analysis (Section C Only)]]
* [[Boom Construction Competition|Lab 11 - Boom Construction Competition]]


== Laboratory Experiment Presentations ==
=== Policies and Procedures  ===
* [[Media:SW_For_EngrsI.ppt|Lab 1 - Software for Engineers I]]
<!--* [[Media:INTRODUCTION_TO_EG1003_Summer|Introduction to EG1004]]-->
* [[Media:MouseTrap.ppt|Lab 1A - Mousetrap Car]]
*[[Media:REC1_Introduction_to_EG_1004.pptx|Introduction to EG1004]]
* [[Media:Balloon.ppt|Lab 2 - Hot Air Balloon]]
* [[Media:EG_1004_Syllabus.pdf| EG1004 Syllabus]]
* [[Media:HW_Anal_and_Synth.ppt|Lab 3 - Product Evaluation]]
* [https://eg.poly.edu/syllabus.php EG1004 Schedules]
* [[Media:HW_Anal_and_Synth_nxt.ppt|Lab 3 - Product Evaluation (NXT Version)]]
* [[Media:Intro_to_Lab.pptx|Introduction to EG1004 Lab]]
* [[Media:Reverse_Engg.ppt|Lab 4 - Reverse Engineering]]
* [[Media:Safety_Guidelines_Updated.pptx|Safety Guidelines]]
* [[Media:LabVIEW.ppt|Lab 5 - Introduction to LabVIEW]]
* [[Media:REC1_Proper_Sourcing_and_Academic_Integrity.pptx|Proper Sourcing and Academic Integrity]]
* [[Media:Digital_Logic.ppt|Lab 6 - Digital Logic]]
* [[EG Grading Policy | Grading Policy]]
* [[Media:Sensors_NXT.ppt|Lab 7 - Sensors (NXT Version)]]
* [[Absence and Lateness Policies]]
* [[Media:Heatxfer.ppt|Lab 8 - Heat Transfer and Thermal Insulation]]
* [[Media:Lemon_car.pptx|Lab 9 - Lemon Car]]
* [[Media:Electronic_Filters.ppt|Lab 10 - Electronic Filters]]
* [[Media:DNAextract.pptx|Lab 10 - DNA Extraction and Gel Analysis]]
* [[Media:Boom.ppt|Lab 11 - Boom Construction Competition]]


== Instructional Web Pages ==
</div>
* [[How to erase old programs from the NXT memory]]
<br clear="both" />
* [[Officexfer|How to read documents made in Office 2007 in Office 2003]]
* [[Screenshots|How to Capture PC Screen Images]]
* [[How to Compress Your Files]]
* [[How to Include Pictures, Equations, and Spreadsheets in Your Presentations and Lab Reports]]
* [[How to Change Pictures so They Don't Take Up So Much Space]]
* [[Making Good Looking Equations in PowerPoint Presentations]]
* [[How to Show Cost Data in Presentations]]
* [[How to Put Video Files in presentations]]
* [[How to Handle Unusual Data]]
* [[Submitting EG1004 Work to the Digital Dropbox]]
* [[How to Clean Up Your Initial "MyPoly" Screen]]
* [[AutoCAD Skill Builder]]


== Laboratory Experiments ==
<div style="float:left; width:45%; padding-right: 5%">
=== Write-ups ===
* Lab 1
** [[Lab 1A: Introduction to Prototype Development]]
** [[Introduction to Revit | Lab 1B: Introduction to Revit]]
*** [https://docs.google.com/document/d/1v0ojKQ_j7qIYh9rDMHyZc75gHocSlXBwlPl1x4MDvH0/edit?usp=sharing Ideation Template]


== Instructional Presentations ==
* Lab 2
** [[Computer Aided Design (CAD) Competition|Lab 2 &mdash; Computer-Aided Design Competition]]
*** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]


* [[Media:Introduction_to_EG.ppt|Introduction to EG1004]]
* Lab 3: Model Shop Session 1
* [[Media:Academic_honesty.ppt|Academic Honesty and Plagiarism]]
** [[RAD Workshop|Lab 3A &mdash; RAD Workshop]]
* [[Media:Safety_Guidelines.ppt|Safety Guidelines]]
** [[HIR Workshop|Lab 3B &mdash; HIR Workshop]]
* [[Media:How_To_Write_a_Lab_Report_in_EG.ppt|How to Write Lab Reports in EG1004]]
* [[Media:Recitation_format.ppt|How to Give a Recitation Presentation]]
* [[Media:Eg_milestones.ppt|How to give a Milestone Presentation]]
* [[Media:Eg_final.ppt|How to give the Final Project Presentation]]
* [[Media:SLDP.zip|Semester-Long Project Presentation]] (zip file) '''Warning! 10MB file!'''
* [[Media:Writing_Teamwork.ppt|Writing Consultant Teamwork Presentation]]
* [[Media:MLCAD.zip|Installing and Using MLCAD]] (zip file)
* [[Media:Exporting_AutoCad_to_MLCAD_.ppt|Exporting MLCAD to AutoCAD]]
* [[Media:Writing_an_Effective Resume.ppt|Writing an Effective Resume]]


* Lab 4
** [[Boom Construction Competition|Lab 4 &mdash; Boom Construction Competition]]


== Semester-Long Design Projects ==
* Lab 5: Model Shop Session 2
** [[Required Pre-Lab Activity|Lab 5 &mdash; Required Pre-Lab Activity]]


* [[(Modular) Retrieval and Delivery System (RDS)|Retrieval and Delivery System (RDS)]]
* Lab 6
* [[Railroad Train Guidance System (RTGS)]]
** [[Investigating CO2 Production of Yeast |Lab 6 &mdash; Investigating CO2 Production of Yeast]]
* [[Supermarket Logistics System (SLS)]]
* [[Autonomous Underwater Vehicle (AUV)]]
* [[(Modular) Bomb Disarming Robot (BDR)|Bomb Disarming Robot (BDR)]]
* [[Search & Recovery Robot (SRR)]]
* [[Disaster Relief Robot (DRR)]]
* [[Spring 2009 Project Configurations]]


*Lab 7
** [[Introduction to Digital Logic|Lab 7 &mdash; Construction of a Simple Alarm System Using Digital Logic]]


== Material to help you with the project ==
* Lab 8
** Lab 8 &mdash; Model Shop Session 3


* [[MS Project Skill Builder O2007|MS Project Skill Builder (Office 2007 Version)]]
* Lab 9
* [[How to plan the schedule and calculate costs for a project]]
** [[Sustainable Energy Vehicle Competition|Lab 9 &mdash; Sustainable Energy Vehicle Competition]]
* [[Media:Legoprice.pdf|Price list for Lego parts for robot projects]]
** [[Digital Multimeters Guidelines]]


* Lab 10
** [[Processes & Water Filters|Lab 10 &mdash; Processes & Water Filters Competition]]


== Project Forms ==
* Lab 11: Model Shop Session 4


=== Component Testing Forms ===
* Lab 12: Model Shop Session 5


</div>
<div style="float:left; width:45%; padding-left:5%">


* [[Media:Traincomp.docx|Railroad Train Guidance System (RTGS)]]
=== PowerPoint Presentations ===
* [[Media:Smktcomp.docx|Supermarket Logistics System (SLS)]]
* Lab 1
* [[Media:Auvcomp.docx|Autonomous Underwater Vehicle (AUV)]]
** [https://docs.google.com/presentation/d/1Q7wNRiqrNAs0-xkHpB0YfyC_J7i4YgCNtRvtSzCHRP8/pub?start=false&loop=false&delayms=60000 Intro to SLDP]
* [[Media:Bdrcomp.docx|Bomb Disarming Robot (BDR)]]
** [https://docs.google.com/presentation/d/1J65NDal2BEQjzMLOu2YzDEX2jhMzK6xcmfYNnQaWY70/pub?start=false&loop=false&delayms=60000 Intro to HIR Revit]
* [[Media:LSRRcomp.docx|Search & Recovery Robot (SRR)]]
** [https://docs.google.com/presentation/d/1FdHtXX8AXMkaBR9JDnx2m9zgCFAMv6wOrnA6EeQTY7A/pub?start=false&loop=false&delayms=60000 Intro to Prototype Development]
* [[Media:DRRcomp.docx|Disaster Relief Robot (DRR)]]
* Lab 2
* [[Media:MRDScomp.docx|Retrieval and Delivery System (RDS)]]
** [https://docs.google.com/presentation/d/1dtuyr0qTyJ8ouNq_mc8uVlBLoZEVVDzri_UTwKFrPFg/pub?start=false&loop=false&delayms=60000 CAD Competition]
* Lab 3
** [https://docs.google.com/presentation/d/1RK16LZQEqtzFKVZnarv9clMcL3-cnSN5xLciomZJoSo/pub?start=false&loop=false&delayms=60000 Lab 3A &mdash; RAD Workshop]
** [https://docs.google.com/presentation/d/1tHdy2rlvRgFwEsgPK3Si7MGp0tSk_nOPqne41-WrLys/pub?start=false&loop=false&delayms=3000 Lab 3B &mdash; HIR Workshop]
* Lab 4
** [[Media:Lab_Boom_Construction_Competition_1.pptx|Lab 4 &mdash; Boom Construction Competition]]
* Lab 5
** [[Media:Lab_RAD_Workshop.pptx |Lab 4A &mdash; RAD Workshop]]
** [[Media:Lab_HIR_Workshop.pptx |Lab 4B &mdash; HIR Workshop]]
* Lab 6
** Lab 6 — Investigating CO2 Production of Yeast
* Lab 7
** [[Media:Introduction_to_Digital_Logic.pptx|Lab 7 &mdash; Construction of a Simple Alarm System Using Digital Logic]]
* Lab 8
** Lab 8 &mdash; Model Shop Session 3
* Lab 9
** [[Media:Lab_Sustainable_Energy_Vehicle_Competition.pptx|Lab 9 &mdash; Sustainable Energy Vehicle]]
* Lab 10
** [[Media: 2023_Lab_Processes_and_Water_Filters.pptx |Lab 10 &mdash; Processes & Water Filters]]
* Lab 11
** Lab 11 &mdash; Model Shop Session 4
* Lab 12
** Lab 11 &mdash; Model Shop Session 5
</div>
<br clear="both" />


== Semester-Long Design Project ==
<div style="float:left; width:45%; padding-right: 5%">
=== Project Information ===
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''


=== Commissioning Forms ===
* [https://docs.google.com/presentation/d/178DiAfKopgsFvu0lRvU9Exu9RA9Ij8Q0Nr98Un6m7zQ/pub?start=false&loop=false&delayms=3000 Introduction to the Semester-Long Design Projects (SLDPs)]
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly & Design Challenge]]
* [[Housing and Innovation in Revit (HIR)|Housing & Innovation in Revit]]
** [[Revit-How-To Guide]]
** [[HIR - Architectural Styles Guide]]


=== Project Requirements ===
* [[Engineering_Notebook|Engineering Notebook]]
* [[Teamwork Expectations]]
* [[Career Development]]
</div>
<div style="float:left; width:45%; padding-left:5%">


* [[Media:Traincomm.docx|Railroad Train Guidance System (RTGS)]]
=== Help & How-Tos ===
* [[Media:Smktcomm.docx|Supermarket Logistics System (SLS)]]
==== General SLDP ====
* [[Media:Auvcomm.docx|Autonomous Underwater Vehicle (AUV)]]
* [[Media:Teamwork_Agreement.docx|Teamwork Agreement]]
* [[Media:Bdrcomm.docx|Bomb Disarming Robot (BDR)]]
* [[Media:Microsoft_Project_Student_Guide.pptx|Microsoft Project Student Guide]]
* [[Media:LSRRcomm.docx|Search & Recovery Robot (SRR)]]
* [[Planning Project Scheduling & Costs]]
* [[Media:DRRcomm.docx|Disaster Relief Robot (DRR)]]
* [[How to Show Cost Data in Presentations]]
* [[Media:MRDScomm.docx|Retrieval and Delivery System (RDS)]]
* RAD Purchasing Documents
 
** [https://docs.google.com/forms/d/e/1FAIpQLSche7g-wEZNKIkieQT71gYKYot-ujC1da0PTmoymKzizK4ByA/viewform RAD Purchasing Request Form]
 
** [https://docs.google.com/document/d/1R4C83D7Wy9Ysyb43ahIf4N7tDg7OQBevwG4_zE17ID8/edit?usp=sharing Non-Permissible RAD Purchases]
=== Project Submission Form, to be used for early or regular submission ===
** [https://docs.google.com/document/d/1cof5ZCWt_c6CYlQV6nC4v1weuLlSZg7_Lmt8rS2g_NY/edit Common RAD Materials and Costs]
 
 
* [[Media:Early.docx|Project Submission Form - all projects]]
 
 
== Helpful Links==
 
* [http://www.lm-software.com/mlcad/e_main.htm MLCad Web site, including tutorials]
* [[Alternatives to MLCad]]
 
 
== Introduction to Technical Presentations ==
 
* [[Giving Effective Presentations]]
* [[Effective Slide Formats]]
* [[Giving the Presentation]]
* [[Blunders to Avoid]]
* [[EG1004 Lab Presentation Format]]
* [[EG1004 Project Milestone Presentation Format]]
 
 
== Introduction to Technical Communication ==


* [[What Is It?]]
==== Prototyping Resources ====
* [[Your Audience and Purpose]]
* [[3D Printing and Logo Guide]]
* [[Bambu Studio Guide]]
* [[Prototyping Guide]]
* [[Virtual Circuit Simulation Guide]]
* [[Arduino Coding Guide]]
* [[Sensors Guide]]


==== VEX Resources ====
* [[VEX How-To Manual]]
* <!--[[VEX Building Guide]]
* [[VEX CAD Assembly Guide]]
* [[VEX Library Guide]] -->
* [[VEX Lift & Claw Design Guide]]
* [[Media:Vex_Price_Sheet.xlsx|Price list for VEX parts for robot projects]]
</div>
<br clear="both" />


== Technical Communication ==
== Recitation Resources ==
* [[Introduction]]
* [[Specifications for Writing Your Lab Reports]]
* [[Introductions and Conclusions]]
* [[Active and Passive Voice]]
* [[Creating a Logical Argument]]
* [[Descriptions - Mechanism and Process]]
* [[Writing Numbers, Units of Measure, and Equations]]
* [[Graphics in Technical Reports]]
* [[Writing Software Documentation]]
* [[How to Write an Effective Resume]]
* [[Persuasion]]
* [[Team Authoring Strategies]]
* [[Editing]]
* [[Punctuation]]
* [[The Use of Articles]]


<div style="float:left; width:45%; padding-right: 5%">


== Sample Labs ==
<!--==== Sample Work ====
 
This section contains two imaginary labs and typical submissions that would be associated with them.
This section contains two imaginary labs and typical submissions that would be associated with them
 
* [[Introduction to the Sample Labs]]
* [[Introduction to the Sample Labs]]
 
<div style="float:left; width:45%; padding-right:5%">
=== Regular Lab ===
===== Regular Lab =====
 
* [[Lab 1701|Lab 1701 - Faster-than-light Travel]]
* [[Lab 1701|Lab 1701 - Faster-than-light Travel]]
* [[Media:Eglabrpt1701a.doc|Annotated lab report]]
* [[Media:Lab1701a.pdf|Annotated lab report]]
* [[Media:Eglabrpt1701.doc|Lab report]]
* [[Media:Lab1701a.ppt|Annotated presentation]]
* [[Media:Lab1701a.ppt|Annotated presentation]]
* [[Media:Lab1701.ppt|Presentation]]
* [[Media:Lab1701.ppt|Presentation]]


=== Competition Lab ===
===== Competition Lab =====
 
* [[Lab 500|Lab 500 - Stock Car Racer]]
* [[Lab 500|Lab 500 - Stock Car Racer]]
* [[Media:Eglabrpt500a.doc|Annotated lab report]]
* [[Media:Eglabrpt500a.pdf|Annotated lab report]]
* [[Media:Eglabrpt500.doc|Lab report]]
* [[Media:Lab500a.ppt|Annotated presentation]]
* [[Media:Lab500a.ppt|Annotated presentation]]
* [[Media:Lab500.ppt|Presentation]]
* [[Media:Lab500.pptx|Presentation]]
</div>
<div style="float:left; width:45%; padding-left:5%">
 
===== Design Project =====
This section is still under construction. Sample SLDP documents will be posted as they become available.
* [[Media:MockMS1.pptx|Milestone 1]]
* [[Media:MockMS2.pptx|Milestone 2]]
* [[Media:MockMS3.pptx|Milestone 3]]
* [[Media:MockFPP.pptx|Final Presentation]]
</div>
</div>
<div style="float:left; width:45%; padding-right:5%">-->
=== Engineering Faculty Presentations ===
* [https://docs.google.com/presentation/d/139w4PU4a6SGgd1qGKYw7pSdiDrf45QeC1vZYWn_oux8/pub?start=true&loop=true&delayms=60000 Recitation 1: Emerging Global Topics]
* [https://docs.google.com/presentation/d/1E9v_oq7fHDdtPYSlzosnqi1XeJJ8fAUxKwXZQISQAc4/pub?start=true&loop=true&delayms=60000 Recitation 2: The Engineering Design Process]
* [https://docs.google.com/presentation/d/16dTBZurl0oSGM_nWRFSW3HfQda--nlvdtCube04rAZM/pub?start=true&loop=true&delayms=60000 Recitation 3: Scientific Writing]
* [https://docs.google.com/presentation/d/1rl3V8is5bxPoKsrv4d0W7nBriakjmSsiwIrkwYqRT7E/pub?start=true&loop=true&delayms=60000 Recitation 4: Teamwork and Project Management]
* [https://docs.google.com/presentation/d/1tdktOTCLv4WIl09jeBKBt4ibeYNjqm7GrDSVKGdrCZ8/pub?start=true&loop=true&delayms=60000 Recitation 5: Undergraduate Opportunities & Graduate School]
* [https://docs.google.com/presentation/d/1HaIDMlg618zsnwqzyL7NqY9_I4M681F5g0hrF7LuBVY/pub?start=true&loop=true&delayms=60000 Recitation 6: Career Advice & Elevator Pitch]
* [https://docs.google.com/presentation/d/1xfdgKQIVZDgbqHnpCm7D9lYgYMt602Xnk7eW3xHeoNk/pub?start=true&loop=true&delayms=60000 Recitation 7: Ethics & Stakeholder Impact]
* [https://docs.google.com/presentation/d/1YGO4OFCq_p7nHey0HC6-HHSMj4bFFUN7M0DEALrr6mk/pub?start=true&loop=true&delayms=60000 Recitation 8: Entrepreneurship at NYU]
* [https://docs.google.com/presentation/d/1OhxLN21q0SRY2CLjvFIbWGlOSbMR64ipF_-U4RXCWpg/pub?start=true&loop=true&delayms=60000 Recitation 9: Engineering & Social Justice]
* [https://docs.google.com/presentation/d/1Pddif82yIBqmAEseXgI6ylXCcyw1cnT_DYga5VIYmZE/pub?start=true&loop=true&delayms=60000 Recitation 10: Research Posters]
* [https://docs.google.com/presentation/d/1gZsA6ChWTtRPQVIg3ztgkXs6a_8UfVFfoMb9OVWe-Bw/pub?start=true&loop=true&delayms=60000 Recitation 11: AI/ML & The Future of Engineering]
* [https://docs.google.com/presentation/d/1j-bX-vre06ZjTkll7qFRBb9LrypQfppEneugznuwTh4/pub?start=true&loop=true&delayms=60000 Recitation 12: Semester in Review]
 
=== Student Presentation Resources ===
* [[EG1004 Lab Presentation Format | Lab Presentation Format]]
* [https://docs.google.com/presentation/d/1ELqW_d03lgZeSJnrJoNt3DJok-g55FP3t7NUP2I6fIg/pub?start=false&loop=false&delayms=60000 How to Give a Recitation Presentation]
* [https://docs.google.com/presentation/d/1jiN2_soKyuD__NOQsVp42-kIy8QUeLU51O1bBEsGJ1g/pub?start=false&loop=false&delayms=60000 How to Give a Milestone Presentation]
* How to Give a Final Presentation
 
</div>
<div style="float:left; width:45%; padding-left:5%">
 
=== Writing Professor Presentations ===
* [https://docs.google.com/presentation/d/1lXFwbSYIsFWsOyV2DnFa5hTbBV-v-CXzP9oCv52Ukmc/pub?start=false&loop=false&delayms=3000 Recitation 1: Technical Writing Values]
* [https://docs.google.com/presentation/d/1c_RUT7EQzk0hPN26xIw1SVJZhLjB9CwwZn0VBqEEOJo/pub?start=false&loop=false&delayms=3000 Recitation 2: Writing Lab Reports]
* [https://docs.google.com/presentation/d/1cp_KrO60xen7JgqHOgNIa0UcZhD-kDhODG4IMjwvXPM/pub?start=false&loop=false&delayms=60000 Recitation 3: Introduction to the Final Design Report]
* Recitation 4: Team Writing
* Recitation 5: Career Development
* Recitation 6: Technical Writing Standards
* Recitation 7: Launching Your Job Search
* Recitation 8: After You Graduate
 
=== Student Writing Resources ===


* [https://drive.google.com/file/d/13gKuFtaMdl3RkYa4GCdW76MYdGA9hEi1/view?usp=drive_link Writing Style Guide]
* [https://drive.google.com/file/d/156BU-IJAaQDBWIv6XYPUS8ezJOf4tJSM/view?usp=drive_link Creating Equations, Tables, and Graphs]
* [[Media:WC_Grading_Rubric.docx| WP Lab Report Rubric]]
* [[Media:WC_FDR_Rubric.docx| WP RAD & VEX FDR Rubric]]
* [[Media:WC_LEED_Report_Rubric.docx| WP HIR FDR (LEED Accreditation Report) Rubric]]
* [https://drive.google.com/file/d/1TRQEfaUKCGQxya1pwECGiiPScj_elam_/view?usp=drive_link Sample Lab Report]
** [https://manual.eg.poly.edu/index.php/Hot_Air_Balloon_Competition Sample Lab Write-Up: Hot Air Balloon]
* [https://docs.google.com/document/d/1XTGT4QmCwtRcgVhbKvQVajm_YA3MMo5uGsR_PqRAZqo NYU Resume Guide & Samples]
* [https://drive.google.com/file/d/13zGunO-BpzlLa2QlwIaMNVeIy81qKH_b/view?usp=drive_link Sample Cover Letter]


== EG1004 Specification Comparison ==


* [[Quick Comparison of Lab Presentation and Report Specifications]]
</div>
<br clear="both" />


== Archived Pages ==
Pages kept for historical purposes can be found in [[The Archive]].


== Feedback ==
== Feedback ==
Do you have a specific change you would like to see? [https://docs.google.com/forms/d/e/1FAIpQLSdgxEiYatlAqpXqnqpeBQ2dUkAUiMXziUQpqXRLlNrNjtaA7w/viewform?usp=sf_link Click here to let us know!]


If you have any comments or questions about this manual
<!--If you have any comments or questions about this manual [mailto:editor@eg.poly.edu click here to send us a message]. Please include something in the subject line indicating what your comment is.-->
[mailto:pli@poly.edu click here to send us a message].
Please include something in the subject line indicating what
your comment is.

Latest revision as of 01:43, 23 September 2024

Welcome to the EG1004 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the EG1004 website.

For information on the Elementary General Engineering & Design program for high schoolers, visit their landing page.

Course Information


Laboratory Experiments

PowerPoint Presentations


Semester-Long Design Project

Project Information

Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.

Project Requirements


Recitation Resources


Archived Pages

Pages kept for historical purposes can be found in The Archive.

Feedback

Do you have a specific change you would like to see? Click here to let us know!


Retrieved from "http://manual.eg.poly.edu/index.php?title=Main_Page&oldid=15496"