Introduction to Revit

Objective

This exercise will introduce Autodesk Fusion 360, which is a drafting software that is used by technical professionals, and basic technical design methods will be shown using this computer-aided design (CAD) software. This software will be used in the semester-long design project (SLDP) by constructing physical prototypes with 3D printing. To practice this prototyping procedure, an NYU logo keychain will be created in Autodesk Fusion 360 and prepared in Cura to be 3D printed.

Overview

Computer-Aided Design

CAD programs, which include Autodesk's Fusion 360, AutoCAD, and Revit; Dassault Systèmes SolidWorks; and Google SketchUp, allow engineers to make dimensioned, scaled drawings. These drawings are used to manufacture equipment, build infrastructure, and allow designers to display their designs with complete specifications and detail. Orthographic views (top, bottom, side, front, back) can be used to document the technical specifications in drawings needed for production while axonometric views (isometric, dimetric, trimetric) can be used to view the final 3D representation of a product.

This exercise will teach the basics of Autodesk Fusion 360, 3D file formats, the basics of 3D printing, and the skills needed to create simple 3D files and prepare them to be 3D printed.

3D Printing

3D printing allows rapid prototyping and onsite manufacturing of products. Initially done with plastic, 3D printing now uses new techniques with new materials, such as aluminum, bronze, and glass. Biomaterials are also being used, such as 3D printing ear cartilage and liver tissue. As the 3D printing industry grows, 3D printing has become a significant part of many engineering fields.

In this course, 3D printing can be used to produce prototype components, building models, SLDP course modifications, robot parts, and a company logo.

Procedure

1. Setting up the File

1. Launch AutoDesk Fusion 360, click Create Account, and fill in the information. Important: Make sure to use an NYU email (Figure 1).

Figure 1: Fusion 360 New File Options

2. Designing the NYU Keychain

1. First, ensure that the units of your drawing are in inches. They are in the Browser on the left side of the window under Document Settings.
2. Start a 2D Sketch by clicking Create Sketch (Figure 2).
   

   Figure 2: Sketch Mode
3. Select the XZ plane (Figure 3).
   

   Figure 3: XZ Plane
4. Select the 2-Point Rectangle from the Sketch section of the toolbar (Figure 4).
   

   Figure 4: 2-Point Rectangle
5. Draw a 2.6” × 0.7” rectangle starting at the origin. Click once at the origin to place one point of the rectangle and click one more time to place the second point of the rectangle. The length values can be typed in before placing the second point of the rectangle (switching which value is changed is done using the Tab key).
6. Select the Center Diameter Circle from the Sketch section of the toolbar.
7. Draw a 0.7” diameter circle centered in the middle of one of the 0.7" sides of the rectangle (the cursor should become a blue X with a triangle and snap to the midpoint of the line when you get close) (Figure 5). Similar to the 2-Point Rectangle, the diameter of the circle can by typed.
   

   Figure 5: Center Diameter Circle
8. Draw another circle 0.45” in diameter in the same position. The sketch should look like Figure 6.
   

   Figure 6: Circles of Keychain Base
9. Fillet (round) the corners of the base. Select the Fillet tool from the Modify section of the toolbar (Figure 7).
   

   Figure 7: Fillet Tool
10. Select one of the two intersecting lines that form the right angles on the base. Set the fillet radius to 0.125" and repeat on the other corner. The sketch should look like Figure 8.
    

    Figure 8: Filleted Corners
11. Remove the extra lines using the trim tool. Select the trim tool from the Modify section of the toolbar.
    

    Figure 8: Trim Tool
12. Select all interior lines that divide the keychain to trim them. If error messages are indicated, remove the dimensions on the rest of the keychain by clicking on them and pressing the Delete key. The sketch should look like Figure 9.
    

    Figure 9: Keychain Base
13. Exit the sketch using the Finish Sketch button in the top right of the window.
14. After creating a 2D sketch, the next step is to use that sketch to create a 3D object. The Extrude tool will be used to create a 3D block. In the future, the Revolve or other tools can be used to create more advanced geometry. Select the Extrude tool from the Create section of the toolbar (Figure 10).

Figure 10: Extrude Tool
15. The Extrude information dialog will pop-up on the right side of the window. First, select the profile of the object to be extruded, which is the sketch that was just created. The sketch will highlight blue if it was made correctly. Click and change the extrusion thickness to 0.15" and press the Enter key. Click OK in the Extrude information dialog. The model will look like Figure 11.
    

    Figure 11: Extruded Sketch
16. The next step is to add the design to the keychain. A vector graphics file will be used in the DXF format provided by NYU. In the future, a logo can be designed using the sketch tool. Download the Tandon Logo DXF File (this logo was converted from the file provided on NYU's identity page).
17. The downloaded ZIP folder must first be extracted. Then, select Insert DXF under the Insert section of the toolbar (Figure 12).
    

    Figure 12: Insert DXF Tool
18. The Insert DXF information dialog will appear on the right side of the window. For the Plane/Sketch, select the top surface of the keychain (Figure 13).
    

    Figure 13: Selected Top Surface
19. Click the folder icon next to Select DXF file to upload the Tandon Logo DXF File. The logo should appear (Figure 14).
    

    Figure 14: Imported DXF Logo
20. Change the units to inches and click OK.
21. The vertical bar and Tandon School of Engineering portions of the logo are not needed. Select the bar and text to the right by clicking and dragging (Figure 15).
    

    Figure 15: Tandon to Delete
22. Delete this portion with the Delete key on the keyboard (not Backspace).
23. The logo needs to be scaled to fit the keychain. A base point must be selected for which the sketch will be scaled to. The midpoint of the line on the right side of the box around the torch will be used as the base point, so a point must be placed there first.
24. To place a point, the sketch must be in editing mode. A sketch is known to be in editing mode when the background turns into gridlines and Finish Sketch appears at the top right of the window. Enter the tandon_long_white sketch by double clicking on the sketch name in the Browser.
    

    Figure 16: Sketches in Browser
25. Select the Point tool under the Create section of the toolbar. Place a point at the midpoint of the right side of the box around the torch (Figure 17).
    

    Figure 17: Midpoint on Box
26. Delete the bottom and the left side of the box around the torch. (Figure 18)
    

    Figure 18: Partly Deleted Box
27. Select the Sketch Scale tool from the Modify section of the toolbar. The Sketch Scale information dialog will appear on the right side of the window. For the Entities, select the remaining lines of the box and torch of the logo by clicking and dragging. Make sure to not select the midpoint that was just placed on the right side of the box .
28. Select the midpoint that was just placed as the Point for scaling.
29. Enter a scaling factor of 0.75 and click OK. (Figure 19)
    

    Figure 19: Scaled Box
30. Redraw the two sides of the box that were deleted using the Line tool in the Create section of the toolbar (Figure 20).
    

    Figure 20: Redrawn Box
31. The logo must now be positioned on the keychain. This will be done by drawing a line for alignment and moving the logo design to where the alignment line is located. Select the line tool and draw a 0.925" horizontal line from a point close to the center of the hole in the keychain base to the right (Figure 21).
    

    Figure 21: Alignment Line
32. Select the entire logo by clicking and dragging. Then select Move/Copy under the Modify section of the toolbar.
33. The Move/Copy information dialog will appear on the right side of the window. The Selection should already be made (the NYU logo). Select Point to Point as the Move Type. For the Origin Point, select the midpoint from the side of the box around the torch. For the Target Point, select the right end of the alignment line that was previously drawn (Figure 22). Click OK.
    

    Figure 22: Move/Copy Tool
34. Delete the alignment line that was previously drawn.
35. Click Finish Sketch in the top right of the window to exit the sketch. The final sketch is shown in Figure 23.
    

    Figure 23: Final Sketch
36. To finish this side of the keychain, the design must be cut into the base. To do this, the Extrude tool will be used.
37. To cut the design, select Extrude from the Create section of the toolbar. The Extrude information dialog will appear on the right side of the window. Select the Profile of the design to cut, which is the area around the torch and each of the letters (Figure 24).
    

    Figure 24: Selected Cut Profile
38. For the Operation, select Cut. Set the Distance to -0.06" (Figure 25). Click OK.
    

    Figure 25: Cut Tool
39. The final model is shown in Figure 26.
    

    Figure 26: Final Model

3. Export for Printing

To 3D print the design, export the file as an STL. The 3D printing software, Cura, can also read 3MF and OBJ files.

1. Cura only reads 3D files in millimeters, so your model must be converted to millimeters. In the Browser on the left side of the window, go under Document Settings and change the units to millimeters. Do not set millimeters as the default (default units should be inches).
2. Right click the Activate Component icon (white circle with a black dot) in the Browser and select Save as STL (Figure 26).
   

   Figure 27: Save Work
3. The Save As STL information dialog will appear on the right side of the window. Click OK - no need to change any of the settings.
4. Save the file to a location that is easily remembered.

4. Designing the Keychain Insert

The last step of the keychain design is to make the keychain insert that will fit in the center of the keychain base to make the NYU logo white.

1. Click File > New Design in the toolbar at the top of the screen (Figure 28).
   

   Figure 28: Start New Design
2. Make sure the document settings are in inches.
3. Start a 2D sketch on the XZ plane and sketch a 2.2" × 0.65" rectangle at the origin. Exit the sketch.
4. Extrude the rectangle 0.12”.
5. The final model is shown in Figure 29.
   

   Figure 29: Keychain Insert
6. Save and export the keychain insert as described in “3. Export for Printing.”

5. Prepare for Printing

Now that the logo design is complete, the next step is to prepare the design in the 3D printer slicing software. Cura will be used for orienting parts on the printer buildplate and selecting the color of each object. It also generates a code for the toolpath that the printer will read and follow to print the objects.

1. Open Cura. If a menu pops up prompting for the printer, select the Ultimaker 3. If a menu does not pop up, make sure the printer currently selected is Ultimaker 3 at the top left corner.
2. To load the two files from above, select File > Open File(s) at the top left of the window and open the STL files containing the base of the keychain and the keychain insert (Figure 30).
3. In Cura, right click and drag to pan around, middle click and drag to move your frame of view, and scroll up and down to zoom in and out.
   

   Figure 30: STL Files Loaded in Cura
4. Select the keychain base and click the Rotate tool from the toolbar on the left side of the window. Use the red, blue, and green hoops to rotate the base so that the logo design is facing upward (Figure 31). Do the same for the keychain filler. Uncheck the Snap Rotation option for more precise rotation.
   

   Figure 31: Rotate Hoops
5. Make sure both objects are lying flat on the buildplate by using Rotate > Lay Flat. If the Lay Flat tool does not lay the object flat, go to the Move tool and type in 0 mm for the Z value (Figure 32).
   

   Figure 32: Move Tool
6. Select the rectangle insert, and using the Move tool on the left, enter 0.15 mm as the Z value to raise it vertically.
7. Select the keychain insert and set it under Extruder 2 in the toolbar on the left (Figure 33). That piece will appear as slightly darker yellow. The insert must be set under a different extruder because it will be printed in a different color than the keychain base.
   

   Figure 33: Changing Extruders
8. Having the keychain insert selected, select the Move tool on the left-hand toolbar. Using the red and green arrows, drag the insert piece and align it in the keychain base (Figure 34). Make sure not to move the insert piece in the Z direction as this was previously set in Step 8.
   

   Figure 34: Final Cura Setup
9. Click Save to File in the bottom right of the window. Save the file as a GCODE file. Upload it to the EG1003 website.

Assignment

A GCODE file must be submitted to the EG1003 website by 11:59 PM the night before your next lab. There is no individual lab report or team presentation for this part of Lab 1.