Difference between revisions of "Introduction to Revit"

From EG1004 Lab Manual
Jump to: navigation, search
Line 15: Line 15:
= Procedure =
= Procedure =
:: <h2 style="margin-left: -4.1em;"> Setting up the file </h2>
:: <h2 style="margin-left: -4.1em;"> Setting up the file </h2>
# Start AutoCAD and open a new file
# Start AutoCAD and open a new file.
#: [[Image:lab_3dprint_1.png|frame|center|Figure 1:.]]
#: [[Image:lab_3dprint_1.png|frame|center|Figure 1: AutoCAD Quick Access Toolbar.]]
# Select the AutoCAD 3D template
# Select the AutoCAD 3D template.
#: [[Image:lab_3dprint_2.png|frame|center|Figure 2:.]]
#: [[Image:lab_3dprint_2.png|frame|center|Figure 2: List of available AutoCAD templates.]]
# Modify the units for the drawing
# Modify the units for the drawing.
#: [[Image:lab_3dprint_3.png|frame|center|Figure 3:.]]
#: [[Image:lab_3dprint_3.png|frame|center|Figure 3: AutoCAD Application Button menu.]]
# Change the length unit type to Engineering
# Change the length unit type to Engineering.
#: [[Image:lab_3dprint_4.png|frame|center|Figure 4:.]]
#: [[Image:lab_3dprint_4.png|frame|center|Figure 4: Drawing Units dialog.]]
#: <h2 style="margin-left: -4.1em;"> File formats and viewing mode </h2>
#: <h2 style="margin-left: -4.1em;"> File formats and viewing mode </h2>
#: AutoCAD drawing files formats include
#: AutoCAD drawing files formats:
#:# DWG – the primary drawing file for the 3D model view
#:# DWG – the primary drawing file for the 3D model view
#:# STL – the file exported from AutoCAD for input into 3D printing software
#:# STL – the file exported from AutoCAD for input into 3D printing software
Line 30: Line 30:
#:# DXF – a drawing format for compatibility with other software
#:# DXF – a drawing format for compatibility with other software
#:# PLT – the file sent to the printer of the layout view
#:# PLT – the file sent to the printer of the layout view
# The default AutoCAD view is model view, click on the layout view
# Click on the layout view as the default AutoCAD view is model view.
#: [[Image:lab_3dprint_5.png|frame|center|Figure 5:.]]
#: [[Image:lab_3dprint_5.png|frame|center|Figure 5: View tabs.]]
# Change to model space in the layout view to change the viewport
# Change to model space in the layout view to change the viewport.
#: [[Image:lab_3dprint_6.png|frame|center|Figure 6:.]]
#: [[Image:lab_3dprint_6.png|frame|center|Figure 6: Application status bar.]]
#: <h2 style="margin-left: -4.1em;"> Designing the EG Keychain </h2>
#: <h2 style="margin-left: -4.1em;"> Designing the EG Keychain </h2>
# Open the file “Lab 1 AutoCAD Template”
# Download and open the [[Media:EG Logo Template.dwg|EG Logo Template]].
#: [[Image:lab_3dprint_7.png|frame|center|Figure 7:.]]
# Open the layer properties and click the lightbulb next to the EG Logo layer
# Open the layer properties and click the lightbulb next to the EG Logo layer
## Layers are a useful way to separate different components of a drawing file
## Layers are a useful way to separate different components of a drawing file
Line 42: Line 41:
## Separating model features (e.g. plumbing and electrical) allows separate viewing
## Separating model features (e.g. plumbing and electrical) allows separate viewing
## Turn the EG Logo layer back off by clicking the lightbulb
## Turn the EG Logo layer back off by clicking the lightbulb
#: [[Image:lab_3dprint_8.png|frame|center|Figure 8:.]]
#: [[Image:lab_3dprint_8.png|frame|center|Figure 7:.]]
# Fill the EG Logo text outline by typing the command REGION
# Fill the EG Logo text outline by typing the command REGION
#: [[Image:lab_3dprint_9.png|frame|center|Figure 9:.]]
#: [[Image:lab_3dprint_9.png|frame|center|Figure 8:.]]
# In general AutoCAD commands operate with the same basic steps
# In general AutoCAD commands operate with the same basic steps
## Type the command
## Type the command
Line 54: Line 53:
# Use the command DRAWORDER to move the outlines of the “Rs” and “A” to the back
# Use the command DRAWORDER to move the outlines of the “Rs” and “A” to the back
# Use the command SUBTRACT to remove the holes in the “Rs” and “A”
# Use the command SUBTRACT to remove the holes in the “Rs” and “A”
#: [[Image:lab_3dprint_10.png|frame|center|Figure 10:.]]
#: [[Image:lab_3dprint_10.png|frame|center|Figure 9:.]]
# Use the EXTRUDE command to add 3/8” height to the text  
# Use the EXTRUDE command to add 3/8” height to the text  
#: [[Image:lab_3dprint_11.png|frame|center|Figure 11:.]]
#: [[Image:lab_3dprint_11.png|frame|center|Figure 10:.]]
# Use the REGION command on the box outline and EXTRUDE to 1/4”
# Use the REGION command on the box outline and EXTRUDE to 1/4”
# Create a keychain hole  
# Create a keychain hole  
Line 64: Line 63:
## Change the DRAWORDER of the box to the back
## Change the DRAWORDER of the box to the back
## SUBTRACT the cylinder from the box
## SUBTRACT the cylinder from the box
#: [[Image:lab_3dprint_12.png|frame|center|Figure 12:.]]
#: [[Image:lab_3dprint_12.png|frame|center|Figure 11:.]]
# Select all features and save as an STL file
# Select all features and save as an STL file
#: [[Image:lab_3dprint_13.png|frame|center|Figure 13:.]]
#: [[Image:lab_3dprint_13.png|frame|center|Figure 12:.]]
# Open the STL file in MakerBot Desktop, click rescale object to convert from inches to millimeters
# Open the STL file in MakerBot Desktop, click rescale object to convert from inches to millimeters
#: [[Image:lab_3dprint_14.png|frame|center|Figure 14:.]]
#: [[Image:lab_3dprint_14.png|frame|center|Figure 13:.]]
# Explore the features of 3D printing software (scaling, position, rotation)
# Explore the features of 3D printing software (scaling, position, rotation)
#: [[Image:lab_3dprint_15.png|frame|center|Figure 15:.]]
#: [[Image:lab_3dprint_15.png|frame|center|Figure 14:.]]
# Additional AutoCAD instruction can be found in the [[AutoCAD Skill Builder]]
# Additional AutoCAD instruction can be found in the [[AutoCAD Skill Builder]]


{{Laboratory Experiments}}
{{Laboratory Experiments}}

Revision as of 01:45, 1 September 2015

Objective

In this exercise, you will be introduced to additional software used by technical professionals. You will learn basic technical design methods using Computer-Aided Design (CAD) software, specifically AutoCAD. Later on in the course, you will use this knowledge to create designs, particularly in your semester-long design project.

Create an EG Logo Keychain in AutoCAD 2016 to export for a 3D print.

Overview

Computer-Aided Design

Computer-Aided Design (CAD) programs allow engineers to make precise scaled drawings in less time than more traditional methods. CAD drawing allows designers to make changes easily and efficiently making them more productive. You will need to understand the fundamentals of Computer-Aided Design to progress in your career.

This exercise has been designed to introduce the basics of CAD drawing.

3D Printing

Blurb.

Procedure

Setting up the file

  1. Start AutoCAD and open a new file.
    Figure 1: AutoCAD Quick Access Toolbar.
  2. Select the AutoCAD 3D template.
    Figure 2: List of available AutoCAD templates.
  3. Modify the units for the drawing.
    Figure 3: AutoCAD Application Button menu.
  4. Change the length unit type to Engineering.
    Figure 4: Drawing Units dialog.

    File formats and viewing mode

    AutoCAD drawing files formats:
    1. DWG – the primary drawing file for the 3D model view
    2. STL – the file exported from AutoCAD for input into 3D printing software
    3. DWT – the file of the sheet set seen in the layout view
    4. DXF – a drawing format for compatibility with other software
    5. PLT – the file sent to the printer of the layout view
  5. Click on the layout view as the default AutoCAD view is model view.
    Figure 5: View tabs.
  6. Change to model space in the layout view to change the viewport.
    Figure 6: Application status bar.

    Designing the EG Keychain

  7. Download and open the EG Logo Template.
  8. Open the layer properties and click the lightbulb next to the EG Logo layer
    1. Layers are a useful way to separate different components of a drawing file
    2. In this DWG, the EG Logo layer is the image file used to create the text outline
    3. Separating model features (e.g. plumbing and electrical) allows separate viewing
    4. Turn the EG Logo layer back off by clicking the lightbulb
    Figure 7:.
  9. Fill the EG Logo text outline by typing the command REGION
    Figure 8:.
  10. In general AutoCAD commands operate with the same basic steps
    1. Type the command
    2. Choose command parameters and objects
      1. Select object (hit enter after)
      2. Enter quantity (type and hit enter)
      3. Specify position (click on screen)
    3. Hit the enter key to execute command
  11. Use the command DRAWORDER to move the outlines of the “Rs” and “A” to the back
  12. Use the command SUBTRACT to remove the holes in the “Rs” and “A”
    Figure 9:.
  13. Use the EXTRUDE command to add 3/8” height to the text
    Figure 10:.
  14. Use the REGION command on the box outline and EXTRUDE to 1/4”
  15. Create a keychain hole
    1. Draw a CIRCLE with radius 1/8”
    2. Change the DRAWORDER of the box to the back
    3. EXTRUDE the circle -1/4”
    4. Change the DRAWORDER of the box to the back
    5. SUBTRACT the cylinder from the box
    Figure 11:.
  16. Select all features and save as an STL file
    Figure 12:.
  17. Open the STL file in MakerBot Desktop, click rescale object to convert from inches to millimeters
    Figure 13:.
  18. Explore the features of 3D printing software (scaling, position, rotation)
    Figure 14:.
  19. Additional AutoCAD instruction can be found in the AutoCAD Skill Builder
Laboratory Experiments
Write-ups
1A  •  1B  • 2 •  3 •  5  •  6 •  7 •  8  •  9  • 7 •  11
Presentations
1A&1B  •  2  •  3  •  4A •  4B  •  4C  •  5  •  6  •  7  •  8  •  9  • 10  •  11
Retrieved from "https://manual.eg.poly.edu/index.php?title=Introduction_to_Revit&oldid=4888"