Difference between revisions of "Hot Air Balloon Competition"

From EG1004 Lab Manual
Jump to: navigation, search
 
(14 intermediate revisions by 5 users not shown)
Line 1: Line 1:
= Objectives =
= Objectives =
The objective of this lab is to design and build a hot air balloon. This is a competition lab. The design should maximize the amount of non-structural weight (payload) that the balloon can lift and the time it can spend aloft, while minimizing the balloon's structural weight and its cost. In designing the balloon, several concepts from physics, including the Ideal Gas Law and the Principle of Archimedes, may be important.
The objective of this lab is to design and build a hot air balloon. This is a competition lab that will be judged by a ratio that uses time afloat, cost, and payload. In theory, the design should maximize the non-structural weight (payload) that the balloon can lift and the time it can spend aloft while minimizing the balloon's structural weight and its cost. In practice, other design choices could also win the competition. Consider the components of the ratio and the rules before designing the balloon.


= Overview =
= Overview =
At Versailles on September 19, 1783, two French brothers, Joseph-Michel and Jacques-Étienne Montgolfier, loaded a sheep, a rooster, and a duck into the basket of their hot air balloon and untethered the ship for the entertainment of the King of France, Louis XVI. They were inspired by watching hot embers rise and float above a fire. Later, in November 1783, they launched the first manned balloon flight<ref name="one">&quot;Montgolfier, Joseph-Michel and Jacques-Étienne&quot; ''Britannica Student Encyclopedia from'' Encyclopædia Britannica Online. http://www.search.eb.com.databases.poly.edu/ebi/article?tocId=9275924 [Accessed November 3, 2004].</ref>.
Hot air balloons are  lighter-than-air aircrafts. They are widely used for recreation and advertising. Another example of this type of aircraft is the dirigible, which consists of a rigid steel frame with bags of light gas inside it that cause lift. Because of the weight of the frame in early dirigibles, an extremely light though flammable gas, such as hydrogen, was used. This led to safety problems, so dirigibles are no longer in service. A blimp is a lighter-than-air aircraft that is essentially a big helium balloon with engines attached. It does not have a structural frame like a dirigible. An aerostat is a blimp that does not have engines, but is attached to the ground. Aerostats are frequently used for advertising or finding a location. Aerostats are also used as weather stations and radar platforms since they can reach altitudes of up to 15,000 feet.  


Hot air balloons are examples of lighter-than-air aircraft. They are widely used for recreation and advertising. Another example of this type of aircraft is the dirigible, which consists of a rigid steel frame with bags of light gas inside it, causing it to lift. Because of the weight of the frame in early dirigibles, an extremely light though flammable gas, such as hydrogen, was used. This led to safety problems, so dirigibles are no longer in service. A blimp is a lighter-than-air aircraft that is essentially a big helium balloon with engines attached. It does not have a structural frame like a dirigible and took its name from the sound it makes when hit with something. An aerostat is a blimp that does not have engines, but is attached by a tether (rope) to the ground. Aerostats are frequently used for advertising or finding a location. The person trying to find the location just looks for the aerostat in the sky attached to the location and travels to it. Aerostats are also used as weather stations and radar platforms since they can reach altitudes of up to 15,000 feet. Building a structure that tall would probably be impossible.
The NASA Balloon Program has been using high altitude scientific balloons as a platform for space and Earth science discoveries and technological innovation. A new design competition has launched to promote the research and development of better scientific balloons. The goal is to design the optimal balloon for maximizing the payload of scientific equipment it can carry and the time the balloon can remain in the air.


The fundamental concepts in this lab are the Ideal Gas Law, gas density, the Principle of Archimedes, and Newton's Second Law of Motion.
The Ideal Gas Law, gas density, the Principle of Archimedes, and Newton's Second Law of Motion explain why hot air balloons float.


== Ideal Gas Law and Gas Density ==
== Ideal Gas Law and Gas Density ==
Usually, when a gas is heated, it expands so the same mass has a larger volume and the density decreases. The expansion can be quite pronounced and a mass of warm air is considerably less dense than an equal mass of cold air. This can be expressed quantitatively by using the Ideal Gas Law to describe the behavior of a gas. This law states that
Usually, when a gas is heated, it expands so the same mass has a larger volume and the density decreases. The expansion can be quite pronounced and a mass of warm air can be considerably less dense than an equal mass of cold air. This can be expressed quantitatively by using the Ideal Gas Law to describe the behavior of a gas. This law states:


<math>PV = nRT\,</math>
<math>PV = nRT\,</math>


where ''P'' is the gas pressure, ''V'' is the volume of gas being considered, ''T'' is its absolute temperature and ''n'' is the number of moles of gas.<br />The universal gas constant ''R'' has a value of 0.0821 <sup>L &middot; atm</sup>/<sub>mol &middot; K</sub>.
''P'' is the gas pressure, ''V'' is the volume of gas being considered, ''T'' is its absolute temperature, and ''n'' is the number of moles of gas.<br />The universal gas constant ''R'' has a value of 0.0821 <sup>L &middot; atm</sup>/<sub>mol &middot; K</sub>.


Comparing two equal volumes of air at the same pressure (say a balloon filled with cold [ambient] air and one filled with an equal amount of warm air), the Ideal Gas Law predicts that the warmer balloon will contain fewer moles of gas, so the warmer balloon will be lighter because the air inside it will be less dense.
Comparing two equal volumes of air at the same pressure, for example, a balloon filled with cold (ambient) air and one filled with an equal amount of warm air, the Ideal Gas Law predicts that the warmer balloon will contain fewer moles of gas so the warmer balloon will be lighter because the air inside it will be less dense.


It is most convenient to rewrite the Ideal Gas Law in terms of density (''&rho;''), ''&rho; = <sup>P</sup>/<sub>RT</sub>'', and for a constant pressure and gas composition, even more simply
To rewrite the Ideal Gas Law in terms of density (''&rho;''), ''&rho; = <sup>P</sup>/<sub>RT</sub>'', and for a constant pressure and gas composition, even more simply


<math>\rho = \frac{C}{T}\,</math>
<math>\rho = \frac{C}{T}\,</math>
Line 25: Line 25:


== Principle of Archimedes and Newton's Second Law of Motion ==
== Principle of Archimedes and Newton's Second Law of Motion ==
But why does this difference in temperature and gas density lead to a tendency for warm air (and hot air balloons) to rise? The Principle of Archimedes provides an explanation. The principle states that when a body is immersed in a fluid (a liquid or a gas), an upward force is exerted on the body equal to the weight of the fluid the body displaces. This upward force is called buoyancy.
The Principle of Archimedes explains why this difference in temperature and gas density leads to a tendency for warm air and hot air balloons to rise. The principle states that when a body is immersed in a fluid (a liquid or a gas), an upward force is exerted on the body that is equal to the weight of the fluid the body displaces. This upward force is called buoyancy.


For a balloon containing air at the same temperature as its surroundings, the buoyancy force is balanced by the weight of the air in the balloon and there is no net force or effect. If the air is heated, it expands. It pushes out and so displaces the cooler, denser air. Because of this displacement, a net upward force is produced on the warm air mass, causing a tendency to rise. In a hot air balloon, the mass of warm air is trapped by the balloon's skin, allowing the difference between its buoyancy force and its weight to be harnessed if it exceeds the structural weight of the balloon and its payload.
For a balloon containing air at the same temperature as its surroundings, the buoyancy force is balanced by the weight of the air in the balloon and there is no net force or effect. If the air is heated, it expands. It pushes out and so displaces the cooler, denser air around it. Because of this displacement, a net upward force is produced on the warm air mass, causing a tendency to rise. In a hot air balloon, the mass of warm air is trapped by the balloon's skin, allowing the difference between the buoyancy force and its weight to be harnessed if it exceeds the structural weight of the balloon and its payload.


The Principle of Archimedes can be expressed in a more useful form for engineering calculations (an equation).
The Principle of Archimedes can be expressed in an equation, which is more useful for engineering calculations.


From the definition of density (''&rho; ='' mass / volume ''= m / V''), Newton's Second Law of Motion (''F = ma''), and for the acceleration due to gravity (''a = g''), the gravity force on a volume of fluid is ''F = (m)(a) = (&rho;V)(g)''.
From the definition of density (''&rho; ='' mass / volume ''= m / V''), Newton's Second Law of Motion (''F = ma''), and for the acceleration due to gravity (''a = g''), the gravity force on a volume of fluid is ''F = (m)(a) = (&rho;V)(g)''.
Line 37: Line 37:
<math>F_{net} = m_{ideal}g = \left ( \rho_{amb} - \rho_{hot} \right )Vg \,</math>,
<math>F_{net} = m_{ideal}g = \left ( \rho_{amb} - \rho_{hot} \right )Vg \,</math>,


Combining the above equation with ''&rho; = C / T'' and [[Engineering Considerations|convenient approximations]], the maximum payload of an ideal hot air balloon is
Combining this equation with ''&rho; = C / T'' and [[Engineering Considerations|convenient approximations]], the maximum payload of an ideal hot air balloon is


<math>m_{ideal} = \left ( 4.0 \tfrac{g}{m^3K} \right ) V \left ( T_{hot} - T_{amb} \right) \,</math>
<math>m_{ideal} = \left ( 4.0 \tfrac{g}{m^3K} \right ) V \left ( T_{hot} - T_{amb} \right) \,</math>
Line 44: Line 44:


== The Balloon Competition Ratio ==
== The Balloon Competition Ratio ==
This lab is a competition. The design's performance will be judged against the other designs in the section. The balloon competition ratio will be used to measure the performance of each design.
This lab is a competition. NASA will judge the design's performance against the other designs in the section. The balloon competition ratio will be used to measure the performance of each design.


<math>\frac{TimeAfloat[s]}{Cost[$]} \times Payload\,</math>
<math>\frac{TimeAfloat[s]}{Cost[$]} \times Payload\,</math>


where ''Payload'' is the number of paperclips the design can lift.
''Payload'' is the number of paperclips the design can lift. Time afloat is the elapsed time from when the balloon rises to when it returns to its starting position. Cost is the cost to build the balloon.


The design will be allowed three trials.
The design will be allowed three trials.
Line 54: Line 54:
= Competition Rules =
= Competition Rules =
The following rules must be observed at all times during the competition. Violation of any of these rules will result in the disqualification of the balloon:
The following rules must be observed at all times during the competition. Violation of any of these rules will result in the disqualification of the balloon:
* The TA must approve the design before it can be entered in the competition.
* The TA must approve the design before it can be entered in the competition
* All the materials used in the design must be purchased.
* All the materials used in the design must be purchased
* Unused materials may not be returned for credit.
* Unused materials may not be returned for credit
* The maximum balloon volume is 1 m<sup>3</sup>.
* The maximum balloon volume is 1 m<sup>3</sup>
* Time aloft is the elapsed time from when the balloon rises from its initial height to when it sinks to that height.
* Time aloft is the elapsed time from when the balloon rises from its initial height to when it sinks to that height
* If the balloon does not rise, the time aloft is zero.
* If the balloon does not rise, the time aloft is zero
* The design is limited to three trials. Indicate the number of trials performed in the Abstract of the lab report. The lab report should also show the results for each trial including dimensions, payload, and competition ratio results.
* The design is limited to three trials. Indicate the number of trials performed and the ratios in the Abstract of the lab report. The lab report should also show the results for each trial including dimensions, payload, estimated balloon volume, and competition results


= Design Considerations =
= Design Considerations =
* What balloon shape best minimizes structural mass and effectively captures and retains warm air to fill and launch the balloon?
* Which balloon shape best minimizes structural mass and effectively captures and retains warm air to fill and launch the balloon?
* How is balloon volume maximized and surface area minimized?
* How is balloon volume maximized and surface area minimized?
* Carefully consider weight, surface area, volume, material properties, and cost in the design process.
* Carefully consider weight, surface area, volume, material properties, and cost in the design process.
Line 73: Line 73:
* Tissue wrap: $0.10/sheet
* Tissue wrap: $0.10/sheet
* 8 ½ x 11 paper sheets: $0.05/sheet
* 8 ½ x 11 paper sheets: $0.05/sheet
* Kevlar string: $0.05/foot
* Kevlar string: $0.05/30cm
* Adhesive tape: $0.03/foot
* Adhesive tape: $0.03/30cm
* Plastic straws: $0
* Plastic straws: $0


== Equipment Used ==
== Equipment Used ==
* Scissors
* Scissors
* Glue stick
* A glue stick
* Paper clips
* Paper clips
* Personal heater
* A personal heater
* Stop watch
* A stop watch
* Thermometer
* A thermometer


= Procedure =
= Procedure =
Construct a hot air balloon using household materials. This lab is a competition. The design with the highest ratio of payload, divided by cost, multiplied by time aloft, will be declared the winner.
Construct a hot air balloon using the available materials. This lab is a competition. The design with the highest ratio of payload divided by cost multiplied by time afloat will be the winner.


Sketch a preliminary design. The maximum balloon volume is 1 m<sup>3</sup>.  
Sketch a preliminary design. The maximum balloon volume is 1 m<sup>3</sup>. Volume should be approximated and recorded on your lab notes.


The design must include an area near the bottom of the balloon where paper clips may be attached in order to add weight during the competition phase of the lab. In addition, there must be an opening that will allow the balloon to be placed over the heater.
The design must include an area near the bottom of the balloon where paperclips may be attached to add payload during the competition phase of the lab. In addition, there must be an opening that will allow hot air to enter the balloon when placed over the heater.


'''<span style="color: red">WARNING:</span> Turn the heater off when not in use. Otherwise, it will become extremely hot and possibly melt the balloons.'''
'''<span style="color: red">WARNING:</span> Turn the heater off when not in use. Otherwise, it will become extremely hot and possibly melt the balloons.'''


When finished, have the sketch approved and signed by the lab TA. Construct the balloon using the materials that were selected. For the competition phase, weight will be attached to the bottom of the balloon and it will be filled with hot air.
When finished, have the sketch approved and signed by the lab TA. Construct the balloon using the materials that were selected. For the competition phase, a payload will be attached to the bottom of the balloon and it will be filled with hot air.


The lab work is now complete. Please clean up the workstation. Return all unused materials to the TA.
The lab work is now complete. Please clean up the workstation. Return all unused materials to the TA.
Line 101: Line 101:


== Individual Lab Report ==
== Individual Lab Report ==
:''For Sections A, B, C, D/H, E, and G, this report is '''optional''' and will count as a Bonus Lab Report if submitted. Extra Credit will be applied to the PowerPoint presentation since report is optional.''
<!--
:''For Sections HS, this report is '''required''' and will count as a regular lab report.''
:''For EG1004 sections, this report is '''optional''' and will count as a Bonus Lab Report if submitted. Extra credit will be applied to the PowerPoint presentation since the report is optional.''
:''For EGED sections, this report is '''required''' and will count as a regular lab report.''
-->


Follow the lab report guidelines laid out in the page called [[Specifications for Writing Your Lab Reports]] in the ''Technical Communication'' section of this manual. The following discussion points should be addressed in the appropriate section of the lab report:
Follow the lab report guidelines laid out in the page called [[Specifications for Writing Your Lab Reports]] in the ''Technical Communication'' section of this manual. The following discussion points should be addressed in the appropriate section of the lab report:
* Discuss the importance of hot air balloons today.
* Discuss the importance of hot air balloons today
* Describe the rules of the competition in the Introduction. What consequences did the rules have on design decisions? In answering, use the appropriate equations.
* Describe the rules of the competition in the Introduction. What consequences did the rules have on design decisions? In answering, use the appropriate equations
* Explain the Ideal Gas Law and the Principle of Archimedes. Include a definition and an example of each.
* Explain the Ideal Gas Law and the Principle of Archimedes. Include a definition and an example of each
* Describe the balloon's design. Show the volume of the balloon (i.e., dimensions and calculation) to show compliance with the rules. Explain the design choices. Include a discussion of the materials chosen and why. Explain the strategy for winning the competition.
* Describe the balloon's design. Calculate the volume of the balloon (i.e., dimensions and calculation) to show compliance with the rules. Explain the design choices. Include a discussion of the materials chosen and why. Explain the strategy for winning the competition
* Describe how the design succeeded or failed. What choices could have improved the balloon's final standing in the competition?
* Describe how the design succeeded or failed. What choices could have improved the balloon's final standing in the competition?
* Discuss how to improve the competition ratio.
* Discuss and elaborate how to improve the competition ratio for this design.
* Suggest possible improvements in conducting the lab
* Include the spreadsheet with every balloon's results. Describe the results and  discuss other designs in the class


{{Lab notes}}
{{Lab notes}}


== Team PowerPoint Presentation ==
== Team PowerPoint Presentation ==
The following discussion points are to be addressed in the appropriate section of the presentation:
The following discussion points must be addressed in the appropriate section of the presentation:
* Describe the rules of the competition. What consequences did the rules have on design decisions? Use the appropriate equations in the answer.
* Describe the rules of the competition. What consequences did the rules have on design decisions? Use the appropriate equations in the answer.
* Since one term in the competition ratio is cost, present the cost of the balloon. Use the page [[How to Show Cost Data in Presentations]] for instructions on how to do this.
* Since one term in the competition ratio is cost, present the cost of the balloon. Use the page [[How to Show Cost Data in Presentations]] for instructions on how to do this.
* Explain the Ideal Gas Law and the Principle of Archimedes. Include a definition and an example of each.
* Explain the Ideal Gas Law and the Principle of Archimedes. Include a definition and an example of each.
* Discuss minimal design. Were all materials purchased used? Describe the importance of minimal design and explain how it was employed in the design.
* Were all materials purchased used?
* Describe the balloon's design. Show the volume of the balloon (i.e., dimensions and calculation) to show compliance with the rules. Explain the design choices. Discuss the materials chosen and why they were chosen. Explain the strategy for winning the competition.
* Describe the balloon's design. Show the volume of the balloon (i.e., dimensions and calculation) to show compliance with the rules. Explain the design choices. Discuss the materials chosen and why they were chosen. Explain the strategy for winning the competition.
* Describe how the design succeeded or failed. What choices could have improved the balloon's final standing in the competition?
* Describe how the design succeeded or failed. What choices could have improved the balloon's final standing in the competition?
Line 125: Line 129:


= Endnotes =
= Endnotes =
# National Aeronautics and Space Administration. 2017. “Scientific Balloons.” Accessed 20 August 2017 from  https://www.nasa.gov/scientificballoons
{{Reflist}}
{{Reflist}}


{{Laboratory Experiments}}
<!--{{Laboratory Experiments}}-->

Latest revision as of 21:39, 5 September 2022

Objectives

The objective of this lab is to design and build a hot air balloon. This is a competition lab that will be judged by a ratio that uses time afloat, cost, and payload. In theory, the design should maximize the non-structural weight (payload) that the balloon can lift and the time it can spend aloft while minimizing the balloon's structural weight and its cost. In practice, other design choices could also win the competition. Consider the components of the ratio and the rules before designing the balloon.

Overview

Hot air balloons are lighter-than-air aircrafts. They are widely used for recreation and advertising. Another example of this type of aircraft is the dirigible, which consists of a rigid steel frame with bags of light gas inside it that cause lift. Because of the weight of the frame in early dirigibles, an extremely light though flammable gas, such as hydrogen, was used. This led to safety problems, so dirigibles are no longer in service. A blimp is a lighter-than-air aircraft that is essentially a big helium balloon with engines attached. It does not have a structural frame like a dirigible. An aerostat is a blimp that does not have engines, but is attached to the ground. Aerostats are frequently used for advertising or finding a location. Aerostats are also used as weather stations and radar platforms since they can reach altitudes of up to 15,000 feet.

The NASA Balloon Program has been using high altitude scientific balloons as a platform for space and Earth science discoveries and technological innovation. A new design competition has launched to promote the research and development of better scientific balloons. The goal is to design the optimal balloon for maximizing the payload of scientific equipment it can carry and the time the balloon can remain in the air.

The Ideal Gas Law, gas density, the Principle of Archimedes, and Newton's Second Law of Motion explain why hot air balloons float.

Ideal Gas Law and Gas Density

Usually, when a gas is heated, it expands so the same mass has a larger volume and the density decreases. The expansion can be quite pronounced and a mass of warm air can be considerably less dense than an equal mass of cold air. This can be expressed quantitatively by using the Ideal Gas Law to describe the behavior of a gas. This law states:

P is the gas pressure, V is the volume of gas being considered, T is its absolute temperature, and n is the number of moles of gas.
The universal gas constant R has a value of 0.0821 L · atm/mol · K.

Comparing two equal volumes of air at the same pressure, for example, a balloon filled with cold (ambient) air and one filled with an equal amount of warm air, the Ideal Gas Law predicts that the warmer balloon will contain fewer moles of gas so the warmer balloon will be lighter because the air inside it will be less dense.

To rewrite the Ideal Gas Law in terms of density (ρ), ρ = P/RT, and for a constant pressure and gas composition, even more simply

where ρ is the air density in kg/m3, at temperature T in Kelvin. For a pressure constant at 1 atm, C is 347 K · kg/m3. (Obtained from dry air density of 1.164 kg/m3 at 20 °C and 1 atm pressure: i.e., 293 K x 1.164 kg/m3.)

Principle of Archimedes and Newton's Second Law of Motion

The Principle of Archimedes explains why this difference in temperature and gas density leads to a tendency for warm air and hot air balloons to rise. The principle states that when a body is immersed in a fluid (a liquid or a gas), an upward force is exerted on the body that is equal to the weight of the fluid the body displaces. This upward force is called buoyancy.

For a balloon containing air at the same temperature as its surroundings, the buoyancy force is balanced by the weight of the air in the balloon and there is no net force or effect. If the air is heated, it expands. It pushes out and so displaces the cooler, denser air around it. Because of this displacement, a net upward force is produced on the warm air mass, causing a tendency to rise. In a hot air balloon, the mass of warm air is trapped by the balloon's skin, allowing the difference between the buoyancy force and its weight to be harnessed if it exceeds the structural weight of the balloon and its payload.

The Principle of Archimedes can be expressed in an equation, which is more useful for engineering calculations.

From the definition of density (ρ = mass / volume = m / V), Newton's Second Law of Motion (F = ma), and for the acceleration due to gravity (a = g), the gravity force on a volume of fluid is F = (m)(a) = (ρV)(g).

Due to Archimedes' Principle and the hotter fluid being at a lower density (ρhot), the net buoyant force can be obtained from the difference Fnet = (mamb g – mhot g), where mamb is the mass of the displaced ambient air and mhot is the mass of the air inside the hot air balloon. If this net buoyant force goes entirely to lift a payload (mideal) it is,

,

Combining this equation with ρ = C / T and convenient approximations, the maximum payload of an ideal hot air balloon is

If the actual hot air balloon mass is determined by mballoon — by weighing it before it is filled with hot air — then the maximum possible payload can be determined. i.e., payloadreal < mideal – mballoon.

The Balloon Competition Ratio

This lab is a competition. NASA will judge the design's performance against the other designs in the section. The balloon competition ratio will be used to measure the performance of each design.

Payload is the number of paperclips the design can lift. Time afloat is the elapsed time from when the balloon rises to when it returns to its starting position. Cost is the cost to build the balloon.

The design will be allowed three trials.

Competition Rules

The following rules must be observed at all times during the competition. Violation of any of these rules will result in the disqualification of the balloon:

  • The TA must approve the design before it can be entered in the competition
  • All the materials used in the design must be purchased
  • Unused materials may not be returned for credit
  • The maximum balloon volume is 1 m3
  • Time aloft is the elapsed time from when the balloon rises from its initial height to when it sinks to that height
  • If the balloon does not rise, the time aloft is zero
  • The design is limited to three trials. Indicate the number of trials performed and the ratios in the Abstract of the lab report. The lab report should also show the results for each trial including dimensions, payload, estimated balloon volume, and competition results

Design Considerations

  • Which balloon shape best minimizes structural mass and effectively captures and retains warm air to fill and launch the balloon?
  • How is balloon volume maximized and surface area minimized?
  • Carefully consider weight, surface area, volume, material properties, and cost in the design process.

Materials and Equipment

Materials with Price List

  • Drawing paper: $0.10/sheet
  • Tissue wrap: $0.10/sheet
  • 8 ½ x 11 paper sheets: $0.05/sheet
  • Kevlar string: $0.05/30cm
  • Adhesive tape: $0.03/30cm
  • Plastic straws: $0

Equipment Used

  • Scissors
  • A glue stick
  • Paper clips
  • A personal heater
  • A stop watch
  • A thermometer

Procedure

Construct a hot air balloon using the available materials. This lab is a competition. The design with the highest ratio of payload divided by cost multiplied by time afloat will be the winner.

Sketch a preliminary design. The maximum balloon volume is 1 m3. Volume should be approximated and recorded on your lab notes.

The design must include an area near the bottom of the balloon where paperclips may be attached to add payload during the competition phase of the lab. In addition, there must be an opening that will allow hot air to enter the balloon when placed over the heater.

WARNING: Turn the heater off when not in use. Otherwise, it will become extremely hot and possibly melt the balloons.

When finished, have the sketch approved and signed by the lab TA. Construct the balloon using the materials that were selected. For the competition phase, a payload will be attached to the bottom of the balloon and it will be filled with hot air.

The lab work is now complete. Please clean up the workstation. Return all unused materials to the TA.

Assignment

Individual Lab Report

Follow the lab report guidelines laid out in the page called Specifications for Writing Your Lab Reports in the Technical Communication section of this manual. The following discussion points should be addressed in the appropriate section of the lab report:

  • Discuss the importance of hot air balloons today
  • Describe the rules of the competition in the Introduction. What consequences did the rules have on design decisions? In answering, use the appropriate equations
  • Explain the Ideal Gas Law and the Principle of Archimedes. Include a definition and an example of each
  • Describe the balloon's design. Calculate the volume of the balloon (i.e., dimensions and calculation) to show compliance with the rules. Explain the design choices. Include a discussion of the materials chosen and why. Explain the strategy for winning the competition
  • Describe how the design succeeded or failed. What choices could have improved the balloon's final standing in the competition?
  • Discuss and elaborate how to improve the competition ratio for this design.
  • Suggest possible improvements in conducting the lab
  • Include the spreadsheet with every balloon's results. Describe the results and discuss other designs in the class

Remember: Lab notes must be taken. Experimental details are easily forgotten unless written down. EG1004 Lab Notes Paper can be downloaded and printed from the EG1004 Website. Use the lab notes to write the Procedure section of the lab report. At the end of each lab, a TA will scan the lab notes and upload them to the Lab Documents section of the EG1004 Website. One point of extra credit is awarded if the lab notes are attached at the end of the lab report. Keeping careful notes is an essential component of all scientific practice.

Team PowerPoint Presentation

The following discussion points must be addressed in the appropriate section of the presentation:

  • Describe the rules of the competition. What consequences did the rules have on design decisions? Use the appropriate equations in the answer.
  • Since one term in the competition ratio is cost, present the cost of the balloon. Use the page How to Show Cost Data in Presentations for instructions on how to do this.
  • Explain the Ideal Gas Law and the Principle of Archimedes. Include a definition and an example of each.
  • Were all materials purchased used?
  • Describe the balloon's design. Show the volume of the balloon (i.e., dimensions and calculation) to show compliance with the rules. Explain the design choices. Discuss the materials chosen and why they were chosen. Explain the strategy for winning the competition.
  • Describe how the design succeeded or failed. What choices could have improved the balloon's final standing in the competition?
  • Discuss how to improve the competition ratio.

Endnotes

  1. National Aeronautics and Space Administration. 2017. “Scientific Balloons.” Accessed 20 August 2017 from https://www.nasa.gov/scientificballoons