EG1004 Lab Presentation Format

From EG1004 Lab Manual
Revision as of 02:36, 31 August 2022 by Admin (talk | contribs) (1003 --> 1004)
Jump to: navigation, search

You will only have about five minutes to present your lab results, so it's important to only have a few slides and make them count. Each of the following subsections will describe what each slide should contain.

Title Slide

The title slide serves a number of purposes. For EG1004, it will identify your presentation for grading purposes. However, it also serves a number of other purposes. First, when you're setting up your presentation, the title slide is used to make sure the projector is properly focused and "zoomed" properly to fill the screen and make the slide readable to everybody in the room. Second, it ensures that the audience knows that they're in the right place, and what they're going to hear.

Therefore, the title slide should have the following information:

  • The number and title of the lab
  • The course identification (EG1004) and your section
  • The date the lab was performed
  • The date of the presentation itself
  • The names of the members of your group, usually in alphabetical order
Figure 1: Title Slide sample

All this information should be on individual lines and centered. One item of protocol: In industry, when multiple people are listed on a presentation, the leader's name is usually given first; if everybody is more or less the same rank, the names are given alphabetically, the practice we follow in EG1004. Repeat the title slide at the end of the presentation as well(after conclusion). It allows the audience to know that you have finished presenting.

When giving the presentation, the presenters should stand in the same order that their names appear on the title slide to help the audience to know who is who. In EG1004, the entire team (typically you and a partner) should be presenting. If somebody is missing, you should note that fact when they're place in the order of how the names comes up.

In a large room where a PA system is being used, everybody will stand on the same side, near the lectern where the microphone is.


The second slide in almost any presentation will be the agenda the presentation will follow, called the overview in EG1004. This helps form the audience's expectations of what's going to be presented, and prepares them for the level of detail you'll be presenting. It usually consists of a list of bulleted items of the topics to be covered. Since EG1004 has a standard format, your overview slide should consist of the following list:

  • Experimental Objective
  • Introduction
  • Background Information
  • Materials
  • Procedure
  • Data/Observations
  • Results
  • Conclusion
Figure 2: Overview sample slide

You'll find that in EG1004 you can just "cut and paste" this slide from one presentation to the next.

When giving the presentation, you don't have to read over every item in the preceding list; presumably the audience knows how to read, and you'll just bore them. It's usually sufficient to just say "These are the items we'll be covering today" wait a few seconds to allow the audience to read over the list, and then move on.

The remaining slides in the presentation will be the items in the list.

Experimental Objective

This slide describes what you tried to accomplish in this lab. The easiest way to understand what this slide does is to picture yourself as a working professional and think of the lab as an assignment that you've been given. What is it that you're trying to accomplish? How would you define success?

In some labs you'll be designing something, so your objective would be to come up with a working design. In other labs you'll be asked to analyze something and describe what it does, so in this case your objective would be to be successful in finding out what the object is, or how it works.

In most cases, the objective is stated early in the lab, so it's easy to find once you know how to look.

Some of the labs are competitions, so an obvious additional objective for these labs would be to win the competition. Everybody wants to win a contest, making this a goal. Nobody wants to lose a contest.

One issue to be careful about is that the objectives are experimental objectives, not educational objectives. Since you're putting yourself in the role of a working professional, presumably you're competent to perform the task, or can learn how to be successful. Therefore, we measure success by whether or not we were successful in our design, not in what we learned. Phrases you should avoid for an objective would be "to learn about", "to become familiar with", or similar phrases.

Generally the objective can be stated in one or two bullets, and should answer the question of "how do we define success?"

Figure 3: Experimental Objective sample slide


The labs cover a wide range of topics, so it's important to explain why this particular lab is important. There are two themes you can use here:

  • Why the technology we're investigating is important to engineering practice or important to people.
  • How this technology can be used to make our life easier.

This information can also usually be found in the lab description if you know how to look. Read the lab carefully, think about why it was chosen, and you'll probably have more than enough material for this slide.

Figure 4: Introduction sample slide

Background Information

At this point you've given the audience enough material to get their attention. Now it's time to start explaining what you did and what you accomplished. The best model to use here is to consider a lawyer building their case in court.  When presenters make a claim, they have to back it up with evidence, not just say to the audience "trust me". This is where you start to present your evidence.

The idea here is to start building your case by making a foundation of the relevant facts and principles that you used in the lab to achieve success. This information can take several forms:

  • The background technology on which the lab is based
  • The relevant theories involved, as presented in the lab
  • The relevant equations used to calculate results and define success
  • Competition rules (if it was a competition lab)
  • Any pictures that help explain the principles involved, or how your design works
  • Real life applications that help demonstrate how your design is effective

Once again, you can find all this material in the lab description if you read it carefully. All you need to do is extract it intelligently.

There are several issues to watch carefully here:

  • Usually the lab description gives you much more background information than you need for the lab presentation. We try to make the lab interesting, so we explain things much more than you need to. The key word here is RELEVANCE. Make sure the material you include is relevant to your presentation, and not just everything that's in the lab description. Keep in mind that you only have about five minutes to present, and an exhaustive discussion of all the background information in the lab description will almost certainly cause you to run over on time, either leading to deductions in lack of presentation skills by staying within the allotted time, or boring the audience with a bunch of irrelevant material.
  • The difference between the Introduction and Background Information can be subtle at times. You might have trouble figuring out where to put certain material. Your faculty member and/or Recitation TA will point this out to you in your earlier presentations, until you get used to this format. Also, an easy "rule of thumb" to use is to consider the material itself. If it's information you needed to successfully complete the lab, it's probably Background Information. If it's merely interesting material that adds interest to your presentation, it should probably go into the Introduction.

This is the first section that may consist of more than one slide. In fact, in the later labs, this section will probably consist of several slides.

For competition labs, the rules of the competition must be stated in this section.

Figure 5: Background Information sample slide


This slide is easy. All you need to do is enumerate the materials you used as a bullet list.

There are a few things to consider here. First, make sure you include only the materials you actually used. Many of the labs, especially the competitions, include a great deal of material to choose from in completing your design. Our intent was to give you considerable flexibility in your design, and to insure that every team should come up with something unique. Therefore, you should only include the actual materials you used, not the complete list of the materials provided. Sometimes you'll use some material and then discover you didn't need it in your final design. In this case the material should be included in the list, but note that it was later discarded.

Next, make sure your list is complete. Sometimes a material is so obvious that you forget to include it. For example, many of the labs make use of the lab PC and some software called LabVIEW®. In this case, these items should appear in the materials.

Overall, the intent here is that if somebody wanted to duplicate what you did in the lab, this would be the list of what they'd need.

One thing to be aware of: For your lab report, you should show your materials in a sentence. However, in the presentation it should be a bullet list. Do not include competition cost tables. It's not required to read every material aloud but give the audience a few minutes to read the slide.

Figure 6: Materials sample slide


This is where you describe what you did. You should describe the steps you followed. Use bullet points or flowcharts to explain the steps you followed.

The main issue here is BREVITY! Keep in mind that you only have five minutes to do the entire presentation. An exhaustive description of every little step you did will easily cause you to run over on time, costing you points on your grade and boring the audience. The lab descriptions are very detailed to help insure that you'll be successful in completing the lab, but you should have MUCH LESS detail in your presentation.

A good "rule of thumb" to use is to have the procedures be one slide, or two at most. More than that is too much detail. For some of the labs, it can be difficult to summarize a lot of work into so few items, but you'll be able to do it if you think about it. If you go over one slide, you should ask yourself if there really isn't a way to summarize at a higher level.

In addition to this list, you can also include pictures of the equipment you used if it helps the audience understand what you did.

Figure 7: Procedure sample slide


At this point let's review what we've covered so far. We've defined what we're trying to accomplish (Objective). We've explained why it's important to do this (Introduction). We've given the "foundation" on which we will base our findings (Background Information). We've shown what we used to accomplish the goal (Materials). We've shown what we did to achieve the goal (Procedure).

Our next task is to explain what we saw and present what we recorded, which is what this section does. The important thing to understand here is that we are only reporting what we observed. Later on we'll use the formulas we gave in the Background Information to derive results

The primary issue here is to show what we saw in a way the audience can grasp quickly. Many of the labs will have you take a number of readings. Therefore, the first way we can report our observations is by using a table (must have a title) of the inputs we provided and the outputs observed. If there are a large number of values, it will be hard to read the table just due to font size, and even if we could it will be hard for the audience to try to deduce a trend from the data you're showing. Therefore, it may be useful to have a chart of the data as well, especially if a large number of readings have been taken.

If you’ve designed something in CAD, it would be a good idea to present an image of the design in this section. Use captions and arrows to point out the special features on the image. If you’ve built a device, it would be a good idea to present an image of the design in this section.

The main idea here is to present the raw data you recorded, without judgment or analysis. You are presenting additional facts which, when added to the preceding sections, continue to build your case.

This section is usually several slides. The main problem here is to present your data in a way that allows the audience to get the message quickly. Remember that your time budget is only about 5 minutes.

Figure 8: Data/Observations sample slide


This is the section where you take the data presented in the preceding section and analyze it. In any cases you'll be applying the formulas you showed in the Background Information to the data given in the Observations to derive the results.

Refer to the data collected to support your results. This way you can easily defend the accuracy and honesty of your results.

Some of the labs are competitions. The competition judging is based on formulas given in the lab description that you should have also included in your Background Information. Show sample calculations. Therefore, you can now show the results of all the teams in your lab session and where you placed. This is usually a spreadsheet that your Lab TA will post to you. You can then include it in your presentation.

You can now present some overall results. First, where did your team place in the competition? Did you achieve the objective you described at the beginning of the presentation? If so, why? If not, why not?

In general, your results will only be one or two slides. If you want more slides than this for this section, remember your time budget.

Figure 9: Results sample slide


In this section of the presentation you should discuss if the objective of the lab was achieved and suggest for improvements for your design or how you performed the lab. If it was a competition lab then state your teams place in the competition.

Figure 10: Conclusion sample slide

In many presentations, the conclusion is the most important slide of all. It is the last impression that you're going to give your audience, and it will probably be the way they will remember you. As an example, many viewers would agree that "Star Wars III: Revenge of the Sith" was a good movie, primarily because of its special effects (a trademark of the entire Star Wars series). However, many of them hasten to add that they were disappointed by the last five minutes of the movie. It's interesting that they give equal weight to the first two hours and fifteen minutes and the last five minutes of the movie.

You want to have an impact on the audience with your conclusion. Above all, you want to make it look like you were successful, even if you weren't. After the Challenger disaster in 1986, NASA held a press conference to discuss one of the darkest days in the US space effort. Many people felt it could be a disaster from which NASA would never recover, and that the US space program was essentially dead. At the press conference, a reporter asked a NASA representative what they planned to do about this colossal failure. The representative, without hesitation, said that NASA never had a failure – an answer that certainly surprised everybody in the room. The representative then explained that NASA's mission was essentially gathering knowledge for the benefit of humanity. They viewed the Challenger incident, although extremely painful, as a learning experience. They would fully investigate what went wrong, fix it, and insure that it would not happen again on future designs. Although it was a bitter way to gain knowledge, this would result in better, safer Space Shuttles. Everyone present felt this was a powerful answer to a very difficult question.

First, if you achieved the objective, say so. Note that the objectives given in the lab description are usually fairly general by intent, so you can usually "spin" the objective to one which is favorable to whatever you achieved. This should be reflected in your "Objective" slide at the beginning of the presentation. Sometimes, however, even this is not enough. In that case, you can restate the objective at the conclusion in a way that at least minimizes the damage.

If the lab was a competition and your team won, be sure to say so! Brag! You deserve it! If you almost won, you can point that out and still claim success. If you came in "in the pack" or at the bottom, you can still claim that you were partially successful by submitting a design.

One word that you should never use: Failure. Remember the NASA story several paragraphs ago, and learn from it. Failures are created by losers, and you don't want the audience to see you as a loser. Therefore, you can just note a lack of total success. In industry, even if you won a competition, there will probably be a review of how to improve the design. Your competition, who did not win, will improve their designs for next time, and if you don't, you'll become noncompetitive.


After your team has given its presentation, your Professor, Writing Consultant and Recitation TA will probably go over it with you to show where it can be improved. The first several reviews will probably be extensive since you are not used to giving presentations. However, as the term progresses you'll find that you've made significant progress and the reviews will be much shorter.

During the comments, you will remain up front at the screen. After the comments are completed, you can return to your seat. It is a tradition that as the team returns to their seat, the class gives them a round of applause to show that they appreciate their efforts.

The most important issue there is that every team learns from every other team. If your team is presenting, the comments will give you valuable guidance. If you're not presenting, you can see good ideas that other teams used, and that you can take advantage of in future presentations. You can also hear the faculty comments and avoid making these mistakes yourself in the future.

Presentation Tips

Use bullet points and avoid using complete sentences. Think about how you’ll transition from topic to topic in advance. Use a storytelling technique to provide the best presentation. Be sure to include the motivation behind the experiment/project and important foundational concepts. All media used in the presentation must have captions!

Figure 11: Example of a Captioned Image

Include images from lab but do not include images of any hand-drawn lab notes. Make sure that the font used and text sizes are consistent. Always think about how the font and text size would look on a bigger screen. Avoid using serif fonts and add a slide number to every slide. To avoid overcrowding the slide, only add main points on the slide and focus on elaborating them verbally. If you make a mistake stay calm and continue presenting. Remember that only you know what you actually had to say so the best thing to do is to continue presenting! Eye contact with the audience is very important to keep them engaged.