Difference between revisions of "Template:SLDP: Drawings (Robots)"

Revision as of 03:33, 4 October 2018

Drawings

All drawings and sketches should be made using Lego Digital Designer.

Create four drawings of the robot: front, top, most detailed side, and a drawing of the gear trains. Sensors, motors, and gears must be included in each drawing. If the robot does not use any gears, make sure to explicitly state that during the presentations.

Each revision of the design must be documented and all changes must be presented during Milestone presentations.

Figure 7: Sample isometric image from Lego Digital Designer (without part numbers)

Revision as of 17:29, 19 August 2015 (view source) Admin (talk \| contribs) (no more MLCad) ← Older edit		Revision as of 03:33, 4 October 2018 (view source) Dfrancisco (talk \| contribs) m (→‎Drawings) Newer edit →
Line 6:		Line 6:
	Each revision of the design must be documented and all changes must be presented during Milestone presentations.		Each revision of the design must be documented and all changes must be presented during Milestone presentations.

	[[Image:Modular6.gif\|frame\|center\|Figure ~~{{{1}}}~~: Sample isometric image from Lego Digital Designer (without part numbers)]]		[[Image:Modular6.gif\|frame\|center\|Figure 7: Sample isometric image from Lego Digital Designer (without part numbers)]]