Difference between revisions of "Main Page"

From EG1003 Lab Manual
Jump to: navigation, search
 
(305 intermediate revisions by 5 users not shown)
Line 1: Line 1:
Welcome to the EG1003 Online Lab Manual website. This site contains all the academic material you need for the course. For administrative matters such as lab report submission, please visit [http://eg.poly.edu eg.poly.edu].
+
Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the [http://eg.poly.edu EG1003 website].
 
 
You can click on anything underlined on this page to link to the material.
 
  
 
== Course Information ==
 
== Course Information ==
 
<div style="float:left; width:45%; padding-right: 5%">
 
<div style="float:left; width:45%; padding-right: 5%">
 +
=== General ===
 
* [[Perspectives on EG1003|Comments from Course Director]]
 
* [[Perspectives on EG1003|Comments from Course Director]]
 
* [[The Course]]
 
* [[The Course]]
 
* [[Structure]]
 
* [[Structure]]
* [[Absence and Lateness Policies]]
 
 
* [[Teamwork]]
 
* [[Teamwork]]
 
* [[Ethics]]
 
* [[Ethics]]
* [[Plagiarism]]
 
 
* [[How to Use the EG1003 Websites]]
 
* [[How to Use the EG1003 Websites]]
 
* [[How to Submit Work to the EG1003 Website]]
 
* [[How to Submit Work to the EG1003 Website]]
* [[EG Grading Policy]]
+
* [[Media:Safety_Guidelines_2020.pptx|Safety Guidelines]]
* [[Safety Guidelines]]
+
<!--* [[Media:Safety Guidelines V2.pptx|Safety Guidelines Presentation]]-->
* [[Keeping a Laboratory Notebook]]
+
 
* [[Software Requirements]]
 
 
</div>
 
</div>
 
<div style="float:left; width:45%; padding-left:5%">
 
<div style="float:left; width:45%; padding-left:5%">
=== PowerPoint Presentations ===
+
 
* [[Media:Introduction_to_EG.pptx|Introduction to EG1003]]
+
=== Syllabus Content  ===
* [[Media:Introduction_to_EG_-_BC.pptx|Introduction to EGED I]]
+
<!--* [[Media:Introduction to EG1003.pptx|Introduction to EG1003]]-->
* [[Media:Introduction_to_EGEDII.pptx|Introduction to EGED II]]
+
<!--* [[Media: Introduction to EG1003 (Summer).pptx|Introduction to EG1003]]
* [[Media:Introduction_to_EGEDIII.pptx|Introduction to EGED III]]
+
[[Media: Introduction to EG1003 (Summer) (Virtual).pptx|Introduction to EG1003 (Virtual)]]-->
* [[Media:Academic_honesty.pptx|Academic Honesty and Plagiarism]]
+
* [[Media:INTRODUCTION_TO_EG1003_Fall_2020.pptx|Introduction to EG1003]]
* [[Media:Safety_Guidelines.pptx|Safety Guidelines]]
+
* [[Media:Introduction_to_EGEDIII_fall_2020.pptx|Introduction to EGED III]]
* [[Media:Showcase.pptx|Display Case Presentation]]
+
<!--* [[Media:Introduction_to_EGEDIII.pptx|Introduction to EGED III]]-->
 +
* [https://docs.google.com/document/d/1a1MSIiIpc8oDM_V0qH4M26D42yTh16s71tl1Gfc3d3g/export?format=pdf EG1003 Syllabus]
 +
<!--[[Media:EG1003_Academic Honesty and Plagiarism.pptx|Academic Honesty and Plagiarism]]-->
 +
* [[Media:ACADEMIC_HONESTY_&_PLAGIARISM_Fall_2020.pptx|Academic Honesty and Plagiarism]]
 +
* [[EG Grading Policy | Grading Policy]]
 +
* [[Absence and Lateness Policies]]
 +
* [[Software Requirements]]
 +
<!--* [[Media:Introduction_to_EG_-_BC.pptx|Introduction to EGED I]]
 +
* [[Media:Introduction_to_EGEDII.pptx|Introduction to EGED II]]-->
 +
 
 
</div>
 
</div>
 
<br clear="both" />
 
<br clear="both" />
Line 34: Line 39:
 
<div style="float:left; width:45%; padding-right: 5%">
 
<div style="float:left; width:45%; padding-right: 5%">
 
=== Write-ups ===
 
=== Write-ups ===
* [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
+
* Lab 1
* [[Virtual Product Dissection|Lab 1B &mdash; Virtual Product Dissection]]
+
** [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
* [[Introduction_to_3D_Printing|Lab 1C &mdash; Introduction to 3D Printing]]
+
** [[Introduction_to_3D_Printing|Lab 1B &mdash; Introduction to 3D Printing]]
* [[Boom Construction Competition|Lab 2 &mdash; Boom Construction Competition]]
+
* Lab 2  
<!--*[[Prototyping with Microcontrollers and Sensors|Lab 3 &mdash; Prototyping with Microcontrollers and Sensors (Section A2 Only)]]-->
+
** [[Computer Aided Design (CAD) Competition|Lab 2 &mdash; CAD Competition]]
* [[Product Evaluation|Lab 3 &mdash; Product Evaluation]]
+
*** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]
<!--** [[Media:Curiosity.pdf|Curiosity (EV3)]] {{bull}} [[Media:Opportunity.pdf|Opportunity (EV3)]] {{bull}} [[Media:Spirit.pdf|Spirit (EV3)]]-->
+
*** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
<!--* [[Product Evaluation (Select Sections Only)|Lab 3 &mdash; Product Evaluation & Quality Improvement (A1, E1, G1, K1)]]-->
+
<!--* [[Product Evaluation|Lab 3 &mdash; Product Evaluation]]-->
<!--* [[Product Evaluation (Sensors 2.0)|Lab 3 &mdash; Product Evaluation (Sensors)]]-->
+
* Lab 3
<!--* [[Product Evaluation and Quality Improvement (EV3)|Lab 3 &mdash; Product Evaluation and Quality Improvement (A1, E1, G1, K1)]]
+
** [[Prototyping with Microcontrollers, Sensors, and Materials|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
** [[Media:EV3_Green.docx|Green (EV3)]] {{bull}} [[Media:EV3_Red.docx|Red (EV3)]] {{bull}} [[Media:EV3_Yellow.docx|Yellow (EV3)]]-->
+
** [[Prototyping with Microcontrollers, Sensors, and Materials (Virtual)|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]
*[[Computer Aided Design (CAD) Competition|Lab 4 &mdash; CAD Competition]]
+
*** [https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]
** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]
+
* Lab 4
** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
+
** [[Virtual Product Dissection|Lab 4A &mdash; Virtual Product Dissection]]
* [[Prototyping with Micro-controllers, Sensors, and Materials|Lab 5 &mdash; Prototyping with Micro-controllers, Sensors, and Materials]]
+
** Lab 4B &mdash; Model Shop Session I
**[https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]
+
* Lab 5
<!--* [[Sensors (EV3)| Lab 4 &mdash; Sensors (EGED III Only)]]-->
+
** [[Sustainable Energy Vehicle Competition|Lab 5 &mdash; Sustainable Energy Vehicle Competition]]
* Lab 6 &mdash; Model Shop Session I
+
** [[Sustainable Energy Vehicle Competition (Virtual)|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]
* [[Introduction to LabVIEW|Lab 7 &mdash; Introduction to LabVIEW]]
+
*** [[Media:DMMGuidelines.docx|Digital Multimeters Guidelines]]
* [[Digital Logic|Lab 8 &mdash; Digital Logic]]
+
* Lab 6
** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]
+
** Lab 6 &mdash; Model Shop Session II
* Lab 9 &mdash; Model Shop Session II
+
* Lab 7
* [[Sustainable Energy Vehicle Competition|Lab 10 &mdash; Sustainable Energy Vehicle Competition]]
+
** [[Boom Construction Competition|Lab 7 &mdash; Boom Construction Competition]]
* [[Biomedical Forensics|Lab 11 &mdash; Biomedical Forensics]]
+
** [[Boom Construction Competition (Virtual)|Lab 7 &mdash; Boom Construction Competition (Virtual)]]
 +
* Lab 8
 +
** [[Processes & Water Filters|Lab 8 &mdash; Processes & Water Filters]]
 +
** [[Processes & Water Filters (Virtual)|Lab 8 &mdash; Processes & Water Filters (Virtual)]]
 +
* Lab 9
 +
** Lab 9 &mdash; Model Shop Session III
 +
* Lab 10
 +
** [[Introduction to LabVIEW & Digital Logic|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic]]
 +
** [[Introduction to LabVIEW & Digital Logic (Virtual)|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]
 +
*** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]
 +
* Lab 11
 +
** [[Biomedical Forensics|Lab 11 &mdash; Biomedical Forensics]]
 +
** [[Biomedical Forensics (Virtual)|Lab 11 &mdash; Biomedical Forensics (Virtual)]]
 
</div>
 
</div>
 
<div style="float:left; width:45%; padding-left:5%">
 
<div style="float:left; width:45%; padding-left:5%">
  
 
=== PowerPoint Presentations ===
 
=== PowerPoint Presentations ===
* [[Media:SW_For_Engrs (3).pptx|Lab 1A &amp; 1C &mdash; Software for Engineers]]
+
* Lab 1
* [[Media:Virtual Product Dissection.pptx|Lab 1B &mdash; Virtual Product Dissection]]
+
** [[Media:Lab_1A&B_Software_for_Engineers.pptx|Lab 1A &amp; 1B &mdash; Software for Engineers]]
* [[Media:Boom Construction Competition.pptx|Lab 2 &mdash; Boom Construction Competition]]
+
* Lab 2
<!--* [[Media:PESensorsA2K2.pptx|Lab 3 &mdash; Product Evaluation (A3, B, C, D, E2, E3, G2, K2, K3, UAI)]] -->
+
** [[Media:CAD_Competition_Fall2020.pptx|Lab 2 &mdash; CAD Competition]]
* [[Media:Lab3_Sensors_Fall_2018.pptx|Lab 3 &mdash; Product Evaluation]]
+
<!--* [[Media:CAD Competition.pptx|Lab 4 &mdash; CAD Competition]]-->
<!--* [[Media:QualImprov.pptx|Lab 3 &mdash; Product Evaluation & Quality Improvement (A1, E1, G1, K1)]] -->
+
<!--* [[Media:Product Evaluation.pptx|Lab 3 &mdash; Product Evaluation]]-->
<!--* [[Media:Lab3_Sensors_Summer_2018.pptx|Lab 3 &mdash; Product Evaluation (Summer 2018 Sections Y2, Y3)]] -->
+
* Lab 3
* [[Media:CAD_Lab_Presentation.pptx|Lab 4 &mdash; CAD Competition]]
+
** [[Media:Prototyping_with_Microcontrollers,_Sensors,_and_Materials_Fall2020.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
* [[Media:Prototyping_Actual.pptx|Lab 5 &mdash; Prototyping with Micro-controllers, Sensors, and Materials]]
+
** [[Media:Prototyping_with_Microcontrollers,_Sensors,_and_Materials_Virtual_Fall2020.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]
* Lab 6 &mdash; Model Shop Session I
+
* Lab 4
* [[Media:LabVIEW.pptx|Lab 7 &mdash; Introduction to LabVIEW]]
+
** [[Media:Virtual Product Dissection V2.pptx|Lab 4A &mdash; Virtual Product Dissection]]
* [[Media:Digital_Logic.pptx|Lab 8 &mdash; Digital Logic]]
+
** Lab 4B &mdash; Model Shop Session I
* Lab 9 &mdash; Model Shop Session II
+
* Lab 5
* [[Media:Renewables_Presentation.pptx|Lab 10 &mdash; Sustainable Energy Vehicle Competition]]
+
** [[Media:Sustainable Energy Vehicle Competition V2.pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition]]
* [[Media:DNA_Forensics.pptx|Lab 11 &mdash; Biomedical Forensics]]
+
** [[Media: Sustainable_Energy_Vehicle_Competition_(Virtual)_(1.4).pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]
<!--* [[Media:Heatxfer.pptx|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]-->
+
<!--* [[Media:Sustainable Energy Vehicle Competition (Virtual).pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]-->
 +
* Lab 6
 +
** Lab 6 &mdash; Model Shop Session II
 +
* Lab 7
 +
** [[Media:Boom Construction Competition V2.pptx|Lab 7 &mdash; Boom Construction Competition]]
 +
** [[Media:Boom Construction Competition (Virtual).pptx|Lab 7 &mdash; Boom Construction Competition (Virtual)]]
 +
* Lab 8
 +
** [[Media: Processes_and_Water_FIlters_Fall_2020.pptx|Lab 8 &mdash; Processes & Water Filters]]
 +
** [[Media: Processes & Water Filters (Virtual).pptx|Lab 8 &mdash; Processes & Water Filters (Virtual)]]
 +
* Lab 9
 +
** Lab 9 &mdash; Model Shop Session III
 +
* Lab 10
 +
** [[Media:Introduction to LabVIEW & Digital Logic.pptx|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic]]
 +
** [[Media:Introduction to LabVIEW & Digital Logic (Virtual).pptx|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]
 +
* Lab 11
 +
** [[Media:Biomedical Forensics V2.pptx|Lab 11 &mdash; Biomedical Forensics]]
 +
** [[Media:Biomedical_Forensics_(Virtual)_(1.2).pptx|Lab 11 &mdash; Biomedical Forensics (Virtual)]]
 
</div>
 
</div>
 
<br clear="both" />
 
<br clear="both" />
Line 85: Line 118:
 
=== Project Information ===
 
=== Project Information ===
 
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
 
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
<!-- * [[Media:SLDPs.pptx|Introduction to the Semester-Long Design Projects]] -->
+
<!--* [[Media:Introduction to the Semester-Long Design Projects (SLDPs).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
* [[Media:SLDPs_2019_Summer_Session.pptx|Introduction to the Semester-Long Design Projects]]
+
* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
* [[Spring 2019 Project Configurations]]
+
* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Summer) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]-->
* [[Media:Open Lab Rules.pdf|Open Lab Rules]]
+
* [[Media:INTRODUCTION_TO_THE_SEMESTER_LONG_DESIGN_PROJECT_Fall_2020.pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly and Design Challenge (RAD)]]
+
<!--* [[Spring 2020 Configurations]]-->
**[https://forms.gle/qXFbCReMauhzjbAZA RAD Grant Application]
+
<!--* [[Media:Open Lab Rules.pdf|Open Lab Rules]]-->
* [[NYU-Housing & Innovation in Revit (HIR)|NYU-Housing & Innovation in Revit (HIR)]]
+
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly & Design Challenge (RAD)]]
 +
* [[Biomedical Device (BMD)|Biomedical Device (BMD)]]
 +
* [[Housing and Innovation in Revit (HIR)|Housing & Innovation in Revit (HIR)]]
 
** [[Media:Revit_How_To_Guide.pdf|Revit How-To]]
 
** [[Media:Revit_How_To_Guide.pdf|Revit How-To]]
** [[Media:LEEDchecklist.docx|LEED Checklist]]
+
<!--** [[Media:How_to_Make_an_STL_File_from_a_Revit_File.pdf|How to Make an STL File From a Revit File]]-->
<!-- ** [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]] -->
+
<!--** [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]  
* [[Bomb Disarming Robot (BDR)]]
+
* [[Bomb Disarming Robot (BDR)]]  
* [[Mars Rover Robot (MRR)|Mars Rover Robot (MRR)]]
+
* [[Retrieval and Delivery System (RDS) | Retrieval & Delivery System (RDS)]]
* [[VEX Mars Rover (VMR)|VEX Mars Rover (VMR)]]
+
* [[Search & Recovery Robot (SRR)]]  
* [[Retrieval and Delivery System (RDS)]]
+
* [[VEX Mars Rover Robot (MRR)| Mars Rover Robot (MRR)]]  
* [[Search & Recovery Robot (SRR)]]
+
** [[VEX Building Guide]]
* [[Biomedical Device (BMD)|Biomedical Device (BMD)]]
+
** [[VEX CAD Assembly Guide]]  
 +
** [[VEX Library Guide]]  
 +
** [[Media:Vex_Price_Sheet.xlsx|Price list for VEX parts for robot projects]]-->
 +
=== Project Submission ===
 +
* [[Submission Guidelines]]
 +
* [[Online Submission FAQs]]
  
 
<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
 
<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
Line 110: Line 150:
 
<div style="float:left; width:45%; padding-left:5%">
 
<div style="float:left; width:45%; padding-left:5%">
  
=== Project Submission ===
+
=== Help & How-Tos ===
* [[Submission Guidelines]]
+
 
* [[Media:Early.docx|Project Submission Form]]
+
==== General SLDP ====
* [[Online Submission FAQs]]
+
* [[Media:Teamwork_Agreement2020.docx|Teamwork Agreement]]
 +
* [[Media:Microsoft_Project_Student_Guide.pptx|Microsoft Project Student Guide]]
 +
<!--* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]-->
 +
* [[Planning Project Scheduling & Costs]]
 +
* [[How to Show Cost Data in Presentations]]
 +
* [[Keeping an Engineering Notebook]]
  
=== Help & How-Tos ===
+
==== Prototyping ====
* [[3D Printing Guide]]
+
* [[Prototyping Guide]]
 
* [[Cura Guide|3D Printing Cura Guide]]
 
* [[Cura Guide|3D Printing Cura Guide]]
* [[Media:Teamwork Agreement.docx|Teamwork Agreement Instructions]]
+
<!--*LEGO EV3
* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]
+
* [[Robot Construction Tips|Robot Construction Tips]]
* [[Media:MSProj Student Guide.pptx|Microsoft Project Student Guide Presentation]]
+
* [[Lego Digital Designer Skill Builder]]
 +
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
 
* [[Sensors (EV3)]]
 
* [[Sensors (EV3)]]
 
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
 
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Training.pptx|Sensors Training]]
+
* [[Media:Sensors Training.pptx|Sensors Training]]-->
* [[AutoCAD Skill Builder]]
+
 
* [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
+
==== Technical Help ====
* [[Lego Digital Designer Skill Builder]]
+
* [[Virtual Circuit Simulation Guide]]
* [[How to plan the schedule and calculate costs for a project]]
+
* [https://docs.google.com/spreadsheets/d/1X-Sj3W7rKKYeUzUMY5eqmQMuMU6Gh1op5HMCAlGhO-I/edit?ts=5d76dbee#gid=682782030 Technical Online Library]
<!--* [[I2E Kit Components]]-->
+
* [[Arduino Coding Guide]]
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
 
* [[How to Show Cost Data in Presentations]]
 
* [[Media:DMMGuidelines.docx|Digital Multi-Meters Guidelines]]
 
* [[Robot Construction Tips|Robot Construction Tips]]
 
 
</div>
 
</div>
 
<br clear="both" />
 
<br clear="both" />
  
== Help & How-Tos ==
+
== Recitation Resources ==
<div style="float:left; width:45%; padding-right:5%">
+
 
=== Technical Writing ===
+
<div style="float:left; width:45%; padding-right: 5%">
* [[What Is It?]]
 
* [[Your Audience and Purpose]]
 
* [[Introduction]]
 
* [[Lab Report Format]]
 
* [[Introductions and Conclusions]]
 
* [[Active and Passive Voice]]
 
* [[Creating a Logical Argument]]
 
* [[Descriptions - Mechanism and Process]]
 
* [[Writing Numbers, Units of Measure, and Equations]]
 
* [[Graphics in Technical Reports]]
 
* [[Writing Software Documentation]]
 
* [[How to Write an Effective Resume]]
 
* [[Persuasion]]
 
* [[Team Authoring Strategies]]
 
* [[Editing]]
 
* [[Punctuation]]
 
* [[The Use of Articles]]
 
* [[Media:WC_Grading_Rubric.docx| WC Grading Rubric]]
 
==== WC Presentations ====
 
* [[Media:How_To_Write_a_Lab_Report_in_EG_2018.pptx|How to Write Lab Reports in EG1003]]
 
* [[Media:passivevoice.pptx|Passive Voice]]
 
* [[Media:Citingsources.pptx|Citing Sources]]
 
* [[Media:Format_Numbers.pptx|Formatting Numbers]]
 
* [[Media:Capitals.pptx|Using Capital Letters]]
 
* [[Media:verbs.ppt|Verb Tense in Lab Reports]]
 
* [[Media:professionaltone.pptx|Professional Tone]]
 
* [[Media:Writing_an_Effective Resume.pptx|Resumes]]
 
* [[Media:combining.ppt|Sentence Combining]]
 
* [[Media:commause.ppt|Commas]]
 
* [[Media:Writing_Teamwork.ppt|Writing Consultant Teamwork Presentation]]
 
* [[Media:Introductions.ppt|Introductions]]
 
</div>
 
<div style="float:left; width:45%; padding-left:5%">
 
  
==== Sample Work ====
+
<!--==== Sample Work ====
 
This section contains two imaginary labs and typical submissions that would be associated with them.
 
This section contains two imaginary labs and typical submissions that would be associated with them.
 
* [[Introduction to the Sample Labs]]
 
* [[Introduction to the Sample Labs]]
Line 199: Line 208:
 
</div>
 
</div>
 
</div>
 
</div>
<div style="float:left; width:45%; padding-left:5%">
+
<div style="float:left; width:45%; padding-right:5%">-->
 +
=== Weekly Presentations ===
 +
* [[Media: REC1_EG1003_FALL2020_(4.1).pptx|Recitation 1: What is engineering?]]
 +
* [[Media: REC2_EG1003_FALL2020_(1).pptx|Recitation 2: Technical Writing]]
 +
* [[Media: REC3_EG1003.pptx|Recitation 3: Professional Presentations]]
 +
* [[Media: REC4_EG1003_FALL2020.pptx|Recitation 4: Engineering Ethics]]
 +
* [[Media: REC5_EG1003_(1).pptx|Recitation 5: Software & Metacognition]]
 +
* [[Media: REC6_EG1003_(1).pptx|Recitation 6: Engineering Design Process]]
 +
* [[Media: REC7_EG1003.pptx|Recitation 7: Analysis & Reflection]]
 +
* [[Media: REC8_EG1003.pptx|Recitation 8: Undergraduate Opportunities]]
 +
* [[Media: REC9_EG1003.pptx|Recitation 9: Career Considerations]]
 +
* [[Media: REC10_EG1003.pptx|Recitation 10: Graduate School]]
 +
* [[Media: REC11_EG1003.pptx|Recitation 11: Data Visualization]]
 +
* [[Media: REC12_EG1003.pptx|Recitation 12: Emerging Engineering Topics]]
 +
* [[Media: REC13_EG1003.pptx|Recitation 13: Entrepreneurial Mindset]]
  
=== Technical Presentations ===
+
=== Additional Resources ===
* [[EG1003 Lab Presentation Format]]
+
* [[EG1003 Lab Presentation Format | Lab Presentation Format]]
* [[Media:Recitation_format.pptx|How to Give a Recitation Presentation]]
+
<!--* [[Media:How to Give a Recitation Presentation V2.pptx|How to Give a Recitation Presentation]]
* [[EG1003 Project Milestone Presentation Format]]
+
* [[Media:How to Give a Recitation Presentation (Virtual).pptx|How to Give a Recitation Presentation (Virtual)]]-->
* [[Media:Eg_milestones.pptx|How to give a Milestone Presentation]]
+
* [[Media:HOW_TO_GIVE_A_RECITATION_PRESENTATION_Fall_2020.pptx|How to Give a Recitation Presentation]]
* [[Media:Eg_final.pptx|How to give the Final Project Presentation]]
+
* [[EG1003 Project Milestone Presentation Format | Milestone Presentation Format]]
* [[Giving Effective Presentations]]
+
* [[Media:HOW_TO_GIVE_A_MILESTONE_PRESENTATION_Fall_2020.pptx|How to Give a Milestone Presentation]]
 +
<!--* [[Media:How to Give a Milestone Presentation.pptx|How to Give a Milestone Presentation]]-->
 +
* [[Media:HOW_TO_GIVE_THE_FINAL_PROJECT_PRESENTATION_Fall_2020.pptx|How to Give a Final Presentation]]
 +
<!--* [[Media:How to Give a Final Presentation.pptx|How to Give a Final Presentation]]-->
 
* [[Effective Slide Formats]]
 
* [[Effective Slide Formats]]
 
* [[Giving the Presentation]]
 
* [[Giving the Presentation]]
 
* [[Blunders to Avoid]]
 
* [[Blunders to Avoid]]
 +
</div>
 +
<div style="float:left; width:45%; padding-left:5%">
 +
 +
=== Writing Resources ===
 +
<!--* [[What Is It?]]
 +
* [[Your Audience and Purpose]]
 +
* [[Persuasion]]
 +
* [[Creating a Logical Argument]]
 +
* [[Writing Software Documentation]]-->
 +
 +
<!--* [[Introduction]]
 +
* [[Lab Report Format]]
 +
* [[Introductions and Conclusions]]
 +
* [[Active and Passive Voice]]
 +
* [[Descriptions - Mechanism and Process]]
 +
* [[Writing Numbers, Units of Measure, and Equations]]
 +
* [[Graphics in Technical Reports]]-->
 +
 +
<!--* [[How to Write an Effective Resume]]
 +
* [[Team Authoring Strategies]]
 +
* [[Editing]]
 +
* [[Punctuation]]
 +
* [[The Use of Articles]]-->
 +
 +
* [[Media:EG_1003_Writing_Style_Guide.docx| EG1003 Writing Style Guide]]
 +
* [[Media:WC_Grading_Rubric(1).docx| WC Lab Report Rubric]]
 +
* [[Media:WC_FDR_Rubric.docx| WC RAD FDR Rubric]]
 +
* [[Media:WC_LEED_Report_Rubric(2).docx| WC LEED Report Rubric]]
 +
* [[Media:EG_1003_Sample_Lab_Report_Hot_Air_Baloon_(3).docx| Sample Lab Report]]
 +
<!--** [https://manual.eg.poly.edu/index.php/Hot_Air_Balloon_Competition Sample Lab Report Write-Up]-->
 +
 +
=== Writing Consultant Presentations ===
 +
* [[Media:REC1_Writing_Lab_Reports_(1).pptx|Recitation 1: Writing Lab Reports]]
 +
* [[Media:REC2_Citing_Sources.pptx|Recitation 2: Citing Sources]]
 +
* [[Media:Recitation_Writing_as_an_Engineer.pptx|Recitation 3: Writing as an Engineer]]
 +
* [[Media:Recitation_Lab_Report_Overview.pptx|Recitation 4: Lab Report Overview]]
 +
* [[Media:Recitation_Storytelling.pptx|Recitation 5: Storytelling]]
 +
* [[Media:Recitation_Data_is_Your_Story.pptx|Recitation 6: Data is Your Story]]
 +
* [[Media:Recitation_Writing_as_a_Professional.pptx|Recitation 7: Writing as a Professional]]
 +
* [[Media:Recitation_Team_Writing.pptx|Recitation 8: Team Writing]]
 +
* [[Media:Recitation_Resumes.pptx|Recitation 9: Resumes]]
 +
** [[Media:NYU_Wasserman_Resume_Guide_and_Samples.pdf|NYU Wasserman Resume Guide & Samples]]
 +
* [[Media:Recitation_Writing_in_Engineering.pptx|Recitation 10: Writing in Engineering]]
 
</div>
 
</div>
 
<br clear="both" />
 
<br clear="both" />

Latest revision as of 12:02, 22 September 2020

Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the EG1003 website.

Course Information


Laboratory Experiments

Write-ups

PowerPoint Presentations


Semester-Long Design Project

Project Information

Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.

Project Submission




Recitation Resources


Archived Pages

Pages kept for historical purposes can be found in The Archive.

Feedback

Do you have a specific change you would like to see? Click here to let us know!