Difference between revisions of "Main Page"

From EG1003 Lab Manual
Jump to: navigation, search
 
(672 intermediate revisions by 14 users not shown)
Line 1: Line 1:
Welcome to the EG1003 Online Lab Manual website. This site contains all the academic material you need for the course. For administrative matters such as lab report submission, please visit [http://eg.poly.edu eg.poly.edu].
Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the [http://eg.poly.edu EG1003 website].
 
You can click on anything underlined on this page to link to the material.


== Course Information ==
== Course Information ==
<div style="float:left; width:45%; padding-right: 5%">
<div style="float:left; width:45%; padding-right: 5%">
=== General ===
* [[Perspectives on EG1003|Comments from Course Director]]
* [[Perspectives on EG1003|Comments from Course Director]]
* [[The Course]]
* [[The Course]]
* [[Structure]]
* [[Structure]]
* [[Absence and Lateness Policies]]
* [[Teamwork]]
* [[Teamwork]]
* [[Ethics]]
* [[Ethics]]
* [[Plagiarism]]
* [[How to Use the EG1003 Websites]]
* [[How to Use the EG1003 Websites]]
* [[How to Submit Work to the EG1003 Website]]
* [[How to Submit Work to the EG1003 Website]]
* [[EG Grading Policy]]
* [[Media:Safety_Guidelines.pptx|Safety Guidelines]]
* [[Safety Guidelines]]
<!--* [[Media:Safety Guidelines V2.pptx|Safety Guidelines Presentation]]-->
* [[Keeping a Laboratory Notebook]]
 
* [[Software Requirements]]
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">
=== PowerPoint Presentations ===
 
* [[Media:Introduction_to_EG.pptx|Introduction to EG1003]]
=== Syllabus Content  ===
* [[Media:Introduction_to_EG_-_BC.pptx|Introduction to EGED I]]
<!--* [[Media:Introduction to EG1003.pptx|Introduction to EG1003]]-->
* [[Media:Introduction_to_EGEDII.pptx|Introduction to EGED II]]
<!--* [[Media: Introduction to EG1003 (Summer).pptx|Introduction to EG1003]]
* [[Media:Introduction_to_EGEDIII.pptx|Introduction to EGED III]]
[[Media: Introduction to EG1003 (Summer) (Virtual).pptx|Introduction to EG1003 (Virtual)]]-->
* [[Media:Academic_honesty.pptx|Academic Honesty and Plagiarism]]
<!--* [[Media:INTRODUCTION_TO_EG1003_Fall_2020.pptx|Introduction to EG1003]]-->
* [[Media:Safety_Guidelines.pptx|Safety Guidelines]]
 
* [[Media:Showcase.pptx|Display Case Presentation]]
*[[Media:INTRODUCTION_TO_EG1003_Summer.pptx|Introduction to EG1003]]
* [https://docs.google.com/document/d/1a1MSIiIpc8oDM_V0qH4M26D42yTh16s71tl1Gfc3d3g/export?format=pdf EG1003 Syllabus]
* [https://eg.poly.edu/syllabus.php EG1003 Schedules]
* [[Media:Intro_to_Lab.pptx|Introduction to EG1003 Lab]]
* [[Media:ACADEMIC_HONESTY_&_PLAGIARISM_Fall_2020.pptx|Academic Honesty and Plagiarism]]
* [[EG Grading Policy | Grading Policy]]
* [[Absence and Lateness Policies]]
* [[Software Requirements]]
 
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 34: Line 38:
<div style="float:left; width:45%; padding-right: 5%">
<div style="float:left; width:45%; padding-right: 5%">
=== Write-ups ===
=== Write-ups ===
* [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
* Lab 1
* [[Introduction_to_3D_Printing_Inventor|Lab 1B &mdash; Introduction to 3D Printing]]
** [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
* [[Mousetrap Vehicle Competition|Lab 1C &mdash; Mousetrap Vehicle Competition]]
** [[Introduction_to_Revit|Lab 1B &mdash; Introduction to Revit]]
* [[Hot Air Balloon Competition|Lab 2 &mdash; Hot Air Balloon Competition]]
* Lab 2
<!--* [[Prototyping with Microcontrollers and Sensors|Lab 3 &mdash; Prototyping with Microcontrollers and Sensors (Section E2 Only)]]-->
** [[Computer Aided Design (CAD) Competition|Lab 2 &mdash; CAD Competition]]
* [[Product Evaluation (Sensors)|Lab 3 &mdash; Product Evaluation (Sensors) (Sections Y2 & Y3 Only)]]  
<!--*** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]-->
* [[Product Evaluation and Quality Improvement (EV3)|Lab 3 &mdash; Product Evaluation and Quality Improvement (Section Y1 Only)]]
*** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]
<!--* [[Product Evaluation|Lab 3 &mdash; Product Evaluation]]-->
** [[Media:EV3_Green.docx|Green (EV3)]] {{bull}} [[Media:EV3_Red.docx|Red (EV3)]] {{bull}} [[Media:EV3_Yellow.docx|Yellow (EV3)]]
* Lab 3
* [[Introduction to LabVIEW|Lab 4 &mdash; Introduction to LabVIEW]]
** [[Prototyping with Microcontrollers, Sensors, and Materials|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
<!--* [[Sensors (EV3)| Lab 4 &mdash; Sensors (EGED III Only)]]-->
<!--** [[Prototyping with Microcontrollers, Sensors, and Materials (Virtual)|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]-->
* [[Digital Logic|Lab 5 &mdash; Digital Logic]]
<!--*** [https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]-->
** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]
* Lab 4
* Lab 6 &mdash; Model Shop Session
** [[LAZ & MRR Workshop|Lab 4A &mdash; LAZ & MRR Workshop]]
* [[Electronic Filters|Lab 7 &mdash; Electronic Filters (Section Y2 Only)]]
** [[RAD Workshop|Lab 4B &mdash; RAD Workshop]]
* [[Renewable Energy Competition|Lab 7 &mdash; Renewable Energy Competition (Sections Y1 & Y3 Only)]]
** [[HIR Workshop|Lab 4C &mdash; HIR Workshop]]
* [[Biomedical Forensics|Lab 8 &mdash; Biomedical Forensics (Section Y3 Only)]]
** Lab 4D &mdash; Model Shop Session I
* [[Lemon Car Competition|Lab 8 &mdash; Lemon Car Competition (Sections Y1 & Y2 Only)]]
* Lab 5
* Lab 9 &mdash; Model Shop Session
** [[Introduction to Digital Logic|Lab 5 &mdash; Digital Logic]]
* [[Boom Construction Competition|Lab 10 &mdash; Boom Construction Competition]]
<!--** [[Introduction to LabVIEW & Digital Logic (Virtual)|Lab 5 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]-->
* [[Heat Transfer and Thermal Insulation Competition|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
<!--** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]-->
** [[Media:Therm VI.vi|Therm VI]]
* Lab 6  
** [[How to Handle Unusual Data]]
** [[Required Pre-Lab Activity|Lab 6A &mdash; Required Pre-Lab Activity]]
** Lab 6B &mdash; Model Shop Session II
* Lab 7
** [[Boom Construction Competition|Lab 7 &mdash; Boom Construction Competition]]  
<!--** [[Boom Construction Competition (Virtual)|Lab 7 &mdash; Boom Construction Competition (Virtual)]]-->
* Lab 8
** [[Processes & Water Filters|Lab 8 &mdash; Processes & Water Filters]]  
<!--** [[Processes & Water Filters (Virtual)|Lab 8 &mdash; Processes & Water Filters (Virtual)]]-->
* Lab 9
** Lab 9 &mdash; Model Shop Session III
* Lab 10
** [[Sustainable Energy Applications|Lab 10 &mdash; Sustainable Energy Applications]]
<!--** [[Sustainable Energy Applications (Virtual)|Lab 10 &mdash; Sustainable Energy Applications (Virtual)]]-->
** [[Digital Multimeters Guidelines]]
* Lab 11
** [[Biomedical Forensics|Lab 11 &mdash; Biomedical Forensics]]  
<!--* Lab 12
** [[Introduction to Cost Estimating!!!!!|Lab 12 &mdash; Digital Logic]]-->
<!--** [[Biomedical Forensics (Virtual)|Lab 11 &mdash; Biomedical Forensics (Virtual)]]-->
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== PowerPoint Presentations ===
=== PowerPoint Presentations ===
* [[Media:SW_For_EngrsI.pptx|Lab 1A&amp;1B &mdash; Software for Engineers]]
* Lab 1
* [[Media:MouseTrap.pptx|Lab 1C &mdash; Mousetrap Vehicle Competition]]
** [[Media:Lab1_Software_for_Engineers.pptx|Lab 1A &amp; 1B &mdash; Software for Engineers]]
* [[Media:Balloon.pptx|Lab 2 &mdash; Hot Air Balloon Competition]]
* Lab 2
<!--* [[Media:Arduino_Lab.pptx|Lab 3 &mdash; Prototyping with Microcontrollers and Sensors (Section E2 Only)]]-->
** [[Media:Lab_Computer_Aided_Design_Competition.pptx|Lab 2 &mdash; CAD Competition]]
* [[Media:PESensorsA2K2.pptx|Lab 3 &mdash; Product Evaluation (Sensors) (EV3) (Sections Y2 & Y3 Only)]]
<!--* [[Media:CAD Competition.pptx|Lab 4 &mdash; CAD Competition]]-->
* [[Media:QualImprov.pptx|Lab 3 &mdash; Product Evaluation & Quality Improvement (Section Y1 Only)]]
<!--* [[Media:Product Evaluation.pptx|Lab 3 &mdash; Product Evaluation]]-->
* [[Media:Intro_to_LabVIEW.pptx|Lab 4 &mdash; Introduction to LabVIEW]]
* Lab 3
<!--* [[Media:Sensors_NXT.pptx|Lab 4 &mdash; Sensors (EGED III Only)]]-->
** [[Media:Lab_Prototyping_with_Microcontrollers,_Sensors,_and_Materials.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
* [[Media:Digital_Logic.pptx|Lab 5 &mdash; Digital Logic]]
<!--** [[Media:Lab_Prototyping_with_Microcontrollers,_Sensors,_and_Materials_Virtual.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]-->
* Lab 6 &mdash; Model Shop Session
* Lab 4
* [[Media:Electronic_Filters.pptx|Lab 7 &mdash; Electronic Filters (Section Y2 Only)]]
** [[Media:LabLAZ&MRRWorkshop.pptx |Lab 4A &mdash; LAZ & MRR Workshop]]
* [[Media:Renewable_Energy.pptx|Lab 7 &mdash; Renewable Energy Competition (Sections Y1 & Y3 Only)]]
** [[Media:Lab_RAD_Workshop.pptx |Lab 4B &mdash; RAD Workshop]]
* [[Media:Biomedical Forensics.pptx|Lab 8 &mdash; Biomedical Forensics (Section Y3 Only)]]
** [[Media:Lab_HIR_Workshop.pptx |Lab 4C &mdash; HIR Workshop]]
* [[Media:Lemon_car.pptx|Lab 8 &mdash; Lemon Car Competition (Sections Y1 & Y2 Only)]]
** Lab 4D &mdash; Model Shop Session I
* Lab 9 &mdash; Model Shop Session
* Lab 5
* [[Media:Boom.pptx|Lab 10 &mdash; Boom Construction Competition]]
** [[Media:Introduction_to_Digital_Logic_2022.pptx|Lab 5 &mdash; Introduction to Digital Logic]]
* [[Media:Heatxfer.pptx|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
<!--** [[Media:Introduction to LabVIEW & Digital Logic (Virtual).pptx|Lab 5 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]-->
* [[Media:Heatxfer new.zip|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition (Sensors)]]
* Lab 6
** Lab 6 &mdash; Model Shop Session II
* Lab 7
** [[Media:Lab_Boom_Construction_Competition.pptx|Lab 7 &mdash; Boom Construction Competition]]
<!--** [[Media:Lab_Boom_Construction_Competition_(Virtual).pptx|Lab 7 &mdash; Boom Construction Competition (Virtual)]]-->
* Lab 8
** [[Media: 2022_Lab_Processes_and_Water_Filters.pptx |Lab 8 &mdash; Processes & Water Filters]]
<!-- ** [[Media:Lab_Processes_and_Water_Filters_(Virtual).pptx|Lab 8 &mdash; Processes & Water Filters (Virtual)]] -->
* Lab 9
** Lab 9 &mdash; Model Shop Session III
* Lab 10
** [[Media:Lab_Sustainable_Energy_Vehicle_Competition_2022_1.pptx|Lab 10 &mdash; Sustainable Energy Vehicle]]
<!--** [[Media:Lab_Sustainable_Energy_Vehicle_(Virtual).pptx|Lab 10 &mdash; Sustainable Energy Vehicle Virtual)]] -->
<!--* [[Media:Sustainable Energy Vehicle Competition (Virtual).pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]-->
* Lab 11
** [[Media:Lab_Biomedical_Forensics-2022.pptx|Lab 11 &mdash; Biomedical Forensics]]
<!--** [[Media:Lab_Biomedical_Forensics_(Virtual).pptx|Lab 11 &mdash; Biomedical Forensics (Virtual)]]-->
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 86: Line 124:
=== Project Information ===
=== Project Information ===
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
* [[Media:SLDPs.pptx|Introduction to the Semester-Long Design Projects]]
* [[Media:Introduction to the Semester-Long Design Projects (SLDPs).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section E2 Only)]]-->
<!--* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]-->
* [[Summer 2017 Project Configurations]]
<!--* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Summer) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]] -->
* [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]
<!--* [[Media:INTRODUCTION_TO_THE_SEMESTER_LONG_DESIGN_PROJECT_Fall_2020.pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]-->
* [[Bomb Disarming Robot (BDR)]]
<!--* [[Spring 2020 Configurations]]-->
<!--* [[Disaster Relief Robot (DRR)]]-->
<!--* [[Media:Open Lab Rules.pdf|Open Lab Rules]]-->
<!--* [[Invention Innovation and Entrepreneurship (I2E)|Invention, Innovation, and Entrepreneurship (I2E) (Section E2 Only)]]-->
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly & Design Challenge (RAD)]]
* [[Mars Rover Robot (MRR)|Mars Rover Robot (MRR)]]
<!--* [[Biomedical Device (BMD)|Biomedical Device (BMD)]]-->
* [[Retrieval and Delivery System (RDS)]]
* [[Housing and Innovation in Revit (HIR)|Housing & Innovation in Revit (HIR)]]
* [[Security Infiltration Drone (SID)|Security Infiltration Drone (SID)]]
** [[Revit-How-To Guide]]
** [[Media:SID_TS_Guide.docx|SID Troubleshooting Guide]]
<!--** [[Media:Updated_Revit_How_To_Guide.pdf|Revit How-To]] -->
* [[Subterranean Infiltrator & Fortune Retriever (SIFR)|Subterranean Infiltrator & Fortune Retriever (SIFR)]]
<!--** [[Media:How_to_Make_an_STL_File_from_a_Revit_File.pdf|How to Make an STL File From a Revit File]]-->
* [[Supermarket Logistics System (SLS)|Supermarket Logistics System (SLS)]]
<!--** [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]
** [[Media:LEEDchecklist.docx|LEED Checklist]]
* [[Bomb Disarming Robot (BDR)]]  
* [[Search & Recovery Robot (SRR)]]
* [[Retrieval and Delivery System (RDS) | Retrieval & Delivery System (RDS)]]  
* [[Media:Open Lab Rules.pdf|Open Lab Rules]]
* [[Search & Recovery Robot (SRR)]] -->
* [[Mars Rover Robot (MRR)| Mars Rover Robot (MRR)]]  
* [[Lunar Agricultural Zone (LAZ)| Lunar Agricultural Zone (LAZ)]]
 
=== Project Expectations ===
* [[Keeping an Engineering Notebook|Engineering Notebook]]  
* [[Teamwork Expectations]]
<!--* [[Professional & Career Development]]
* [[Resume - Ingrid
* [[Cover Letter - Ingrid]]
* [[LinkedIn - https://nyuwassermanblog.com/2021/11/20/how-to-create-a-powerful-linkedin-profile/]]
* [[Portfolio - Victoria]] -->


=== Project Submission ===
* [[Submission Guidelines]]
* [[Online Submission FAQs]]


<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
* [[Invention Innovation and Entrepreneurship (I2E)|Invention, Innovation, and Entrepreneurship (I2E) (Section A2 Only)]]-->


</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== Project Submission ===
* [[Submission Guidelines]]
* [[Media:Early.docx|Project Submission Form]]
* [[Online Submission FAQs]]


=== Help & How-Tos ===
=== Help & How-Tos ===
* [[3D Printing Extra Credit]]
==== General SLDP ====
* [[Makerbot Guide|3D Printing Makerbot Guide]]
* [[Media:Teamwork_Agreement2020.docx|Teamwork Agreement]]
* [[Media:Teamwork Agreement.docx|Teamwork Agreement Instructions]]
* [[Media:Microsoft_Project_Student_Guide.pptx|Microsoft Project Student Guide]]
* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]
<!--* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]-->
* [[Media:MSProj Student Guide.pptx|Microsoft Project Student Guide Presentation]]
* [[Planning Project Scheduling & Costs]]
* [[How to Show Cost Data in Presentations]]
<!--* [[Keeping an Engineering Notebook]]-->
 
==== Prototyping ====
* [[3D Printing and Logo Guide]]
* [[Technical Workshops]]
* <!-- [[Cura Guide|3D Printing Cura Guide]]-->
* [[Virtual Circuit Simulation Guide]]
* [https://docs.google.com/spreadsheets/d/1X-Sj3W7rKKYeUzUMY5eqmQMuMU6Gh1op5HMCAlGhO-I/edit?ts=5d76dbee#gid=682782030 Technical Online Library]
* [[Arduino Coding Guide]]
* [[Sensors Guide]]
<!--*LEGO EV3
* [[Robot Construction Tips|Robot Construction Tips]]
* [[Lego Digital Designer Skill Builder]]
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[Sensors (EV3)]]
* [[Sensors (EV3)]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Training.pptx|Sensors Training]]
* [[Media:Sensors Training.pptx|Sensors Training]]-->
* [[AutoCAD Skill Builder]]
 
* [[Lego Digital Designer Skill Builder]]
==== VEX Resources ====
* [[How to plan the schedule and calculate costs for a project]]
* [[VEX How-To Manual]]
* [[I2E Kit Components]]
* <!--[[VEX Building Guide]]  
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[VEX CAD Assembly Guide]]  
* [[How to Show Cost Data in Presentations]]
* [[VEX Library Guide]] -->
* [[Media:DMMGuidelines.docx|Digital Multi-Meters Guidelines]]
* [[VEX Lift & Claw Design Guide]]
* [[Media:Vex_Price_Sheet.xlsx|Price list for VEX parts for robot projects]]
</div>
</div>
<br clear="both" />
<br clear="both" />


== Help & How-Tos ==
== Recitation Resources ==
<div style="float:left; width:45%; padding-right:5%">
 
=== Technical Writing ===
<div style="float:left; width:45%; padding-right: 5%">
* [[What Is It?]]
* [[Your Audience and Purpose]]
* [[Introduction]]
* [[Lab Report Format]]
* [[Introductions and Conclusions]]
* [[Active and Passive Voice]]
* [[Creating a Logical Argument]]
* [[Descriptions - Mechanism and Process]]
* [[Writing Numbers, Units of Measure, and Equations]]
* [[Graphics in Technical Reports]]
* [[Writing Software Documentation]]
* [[How to Write an Effective Resume]]
* [[Persuasion]]
* [[Team Authoring Strategies]]
* [[Editing]]
* [[Punctuation]]
* [[The Use of Articles]]
==== WC Presentations ====
* [[Media:How_To_Write_a_Lab_Report_in_EG.ppt|How to Write Lab Reports in EG1003]]
* [[Media:passivevoice.ppt|Passive Voice]]
* [[Media:Citingsources.ppt|Citing Sources]]
* [[Media:numbers.ppt|Formatting Numbers]]
* [[Media:capitals.ppt|Using Capital Letters]]
* [[Media:verbs.ppt|Verb Tense in Lab Reports]]
* [[Media:professionaltone.ppt|Professional Tone]]
* [[Media:Writing_an_Effective Resume.ppt|Resumes]]
* [[Media:combining.ppt|Sentence Combining]]
* [[Media:commause.ppt|Commas]]
* [[Media:Writing_Teamwork.ppt|Writing Consultant Teamwork Presentation]]
* [[Media:Introductions.ppt|Introductions]]
</div>
<div style="float:left; width:45%; padding-left:5%">


==== Sample Work ====
<!--==== Sample Work ====
This section contains two imaginary labs and typical submissions that would be associated with them.
This section contains two imaginary labs and typical submissions that would be associated with them.
* [[Introduction to the Sample Labs]]
* [[Introduction to the Sample Labs]]
Line 193: Line 227:
* [[Media:MockFPP.pptx|Final Presentation]]
* [[Media:MockFPP.pptx|Final Presentation]]
</div>
</div>
</div>
<div style="float:left; width:45%; padding-right:5%">-->
=== Weekly Presentations ===
* [[Media: REC1_EG1003.pptx|Recitation 1: What is engineering?]]
* [[Media: REC2_EG1003.pptx|Recitation 2: Technical Writing]]
* [[Media: REC3_EG1003.pptx|Recitation 3: Professional Presentations]]
* [[Media: REC4_EG1003.pptx|Recitation 4: Engineering Design Process]]
* [[Media: REC5_EG1003.pptx|Recitation 5: Software & Metacognition]]
* [[Media: REC6_EG1003_2022.pptx|Recitation 6: Engineering Ethics]]
* [[Media: REC7_EG1003.pptx|Recitation 7: Analysis & Reflection]]
* [[Media: REC8_EG1003.pptx|Recitation 8: Undergraduate Opportunities]]
* [[Media: REC9_EG1003.pptx|Recitation 9: Career Considerations]]
* [[Media: REC10_EG1003_SPRING2022.pptx|Recitation 10: Graduate School]]
<!--* [[Media: REC11_EG1003_FALL2020.pptx|Recitation 11: Emerging Engineering Topics]]
* [[Media: REC12_EG1003_FALL2020.pptx|Recitation 12: Entrepreneurial Mindset]]-->
* [[Media: REC11_EG1003.pptx|Recitation 11: Data Visualization]]
* [[Media: REC12_EG1003.pptx|Recitation 12: Emerging Engineering Topics]]
* [[Media: REC13_EG1003.pptx|Recitation 13: Entrepreneurial Mindset]]
=== Presentation Resources ===
* [[EG1003 Lab Presentation Format | Lab Presentation Format]]
<!--* [[Media:How to Give a Recitation Presentation V2.pptx|How to Give a Recitation Presentation]]
* [[Media:How to Give a Recitation Presentation (Virtual).pptx|How to Give a Recitation Presentation (Virtual)]]-->
* [[Media:HOW_TO_GIVE_A_RECITATION_PRESENTATION_Spring_2022.pptx|How to Give a Recitation Presentation]]
<!--* [[EG1003 Project Milestone Presentation Format | Milestone Presentation Format]]-->
* [[Media:HOW_TO_GIVE_A_MILESTONE_PRESENTATION_Fall_2020.pptx|How to Give a Milestone Presentation]]
<!--* [[Media:How to Give a Milestone Presentation.pptx|How to Give a Milestone Presentation]]-->
* [[Media:HOW_TO_GIVE_THE_FINAL_PROJECT_PRESENTATION_Fall_2020.pptx|How to Give a Final Presentation]]
<!--* [[Media:How to Give a Final Presentation.pptx|How to Give a Final Presentation]]-->
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">
=== Technical Presentations ===
 
* [[EG1003 Lab Presentation Format]]
=== Writing Resources ===
* [[Media:Recitation_format.pptx|How to Give a Recitation Presentation]]
<!--* [[What Is It?]]
* [[EG1003 Project Milestone Presentation Format]]
* [[Your Audience and Purpose]]
* [[Media:Eg_milestones.pptx|How to give a Milestone Presentation]]
* [[Persuasion]]
* [[Media:Eg_final.pptx|How to give the Final Project Presentation]]
* [[Creating a Logical Argument]]
* [[Giving Effective Presentations]]
* [[Writing Software Documentation]]-->
* [[Effective Slide Formats]]
 
* [[Giving the Presentation]]
<!--* [[Introduction]]
* [[Blunders to Avoid]]
* [[Lab Report Format]]
* [[Introductions and Conclusions]]
* [[Active and Passive Voice]]
* [[Descriptions - Mechanism and Process]]
* [[Writing Numbers, Units of Measure, and Equations]]
* [[Graphics in Technical Reports]]-->
 
<!--* [[How to Write an Effective Resume]]
* [[Team Authoring Strategies]]
* [[Editing]]
* [[Punctuation]]
* [[The Use of Articles]]-->
 
* [[Media:EG_1003_Writing_Style_Guide.pdf| EG1003 Writing Style Guide]]
<!--* [[Media:EG_1003_Lab_11_Self_Refelction_Memo.pdf| EG1003 Lab 11 Memo and Self-Reflection]]-->
* [[Media:WC_Grading_Rubric(1).docx| WC Lab Report Rubric]]
* [[Media:WC_FDR_Rubric.docx| WC RAD & VEX FDR Rubric]]
* [[Media:WC_LEED_Report_Rubric(2).docx| WC HIR FDR (LEED Accreditation Report) Rubric]]
* [[Media:EG_1003_Sample_Lab_Report.pdf| Sample Lab Report]]
** [https://manual.eg.poly.edu/index.php/Hot_Air_Balloon_Competition Sample Lab Write-Up: Hot Air Balloon]
 
=== Writing Consultant Presentations ===
* [[Media:REC1_Writing_Lab_Reports_(1).pptx|Recitation 1: Writing Lab Reports]]
* [[Media:REC2_Citing_Sources.pptx|Recitation 2: Citing Sources]]
* [[Media:Recitation_Writing_as_an_Engineer.pptx|Recitation 3: Writing as an Engineer]]
* [[Media:Recitation_Figures_Tables_Equations.pptx|Recitation 4: Technical Writing Standards]]
* [[Media:Recitation_Storytelling.pptx|Recitation 5: Storytelling]]
* [[Media:Recitation_Data_is_Your_Story.pptx|Recitation 6: Data is Your Story]]
* [[Media:Recitation_Writing_as_a_Professional.pptx|Recitation 7: Writing as a Professional]]
* [[Media:Recitation_Team_Writing.pptx|Recitation 8: Team Writing]]
* [[Media:Recitation_Resumes.pptx|Recitation 9: Resumes]]
** [https://docs.google.com/document/d/1XTGT4QmCwtRcgVhbKvQVajm_YA3MMo5uGsR_PqRAZqo NYU Resume Guide & Samples]
** [https://tandonconnect-nyu-csm.symplicity.com/students/index.php?s=resource&ss=doclib&mode=list TandonConnect Resume Templates]
* [[Media:Recitation_Resumes_Revisted.pptx|Recitation 10: Resumes Revisited]]
* [[Media:Recitation_Cover_Letters.pptx|Recitation 11: The Art of the Cover Letter]]
* [[Media:Recitation_Writing_in_Engineering.pptx|Recitation 12: Writing in Engineering]]
</div>
</div>
<br clear="both" />
<br clear="both" />

Latest revision as of 03:42, 16 July 2022

Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the EG1003 website.

Course Information


Laboratory Experiments


Semester-Long Design Project

Project Information

Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.

Project Expectations

Project Submission



Recitation Resources


Archived Pages

Pages kept for historical purposes can be found in The Archive.

Feedback

Do you have a specific change you would like to see? Click here to let us know!