Difference between revisions of "Main Page"

From EG1004 Lab Manual
Jump to: navigation, search
(→‎Project Information: RTGS unavailable for summer)
(238 intermediate revisions by 10 users not shown)
Line 35: Line 35:
=== Write-ups ===
=== Write-ups ===
* [[Introduction to Microsoft Office|Lab 1A — Introduction to Microsoft Office]]
* [[Introduction to Microsoft Office|Lab 1A — Introduction to Microsoft Office]]
* [[Introduction to 3D Printing|Lab 1B — Introduction to 3D Printing]]
* [[Virtual Product Dissection|Lab 1B — Virtual Product Dissection]]
* [[Mousetrap Vehicle Competition|Lab 1C — Mousetrap Vehicle Competition]]
* [[Introduction_to_3D_Printing|Lab 1C — Introduction to 3D Printing]]
* [[Hot Air Balloon Competition|Lab 2 — Hot Air Balloon Competition]]
* [[Boom Construction Competition|Lab 2 — Boom Construction Competition]]
* [[Product Evaluation and Quality Improvement (EV3)|Lab 3 — Product Evaluation and Quality Improvement (EV3]]
<!--*[[Prototyping with Microcontrollers and Sensors|Lab 3 &mdash; Prototyping with Microcontrollers and Sensors (Section A2 Only)]]-->
** [[Media:EV3_Green.docx|Green (EV3)]] {{bull}} [[Media:EV3_Red.docx|Red (EV3)]] {{bull}} [[Media:EV3_Yellow.docx|Yellow (EV3)]]
* [[Product Evaluation|Lab 3 &mdash; Product Evaluation]]
* [[Introduction to LabVIEW|Lab 4 &mdash; Introduction to LabVIEW (EG1003 & Only)]]
<!--** [[Media:Curiosity.pdf|Curiosity (EV3)]] {{bull}} [[Media:Opportunity.pdf|Opportunity (EV3)]] {{bull}} [[Media:Spirit.pdf|Spirit (EV3)]]-->
* [[Sensors (EV3)| Lab 4 &mdash; Sensors (EGED III Only)]]
<!--* [[Product Evaluation (Select Sections Only)|Lab 3 &mdash; Product Evaluation & Quality Improvement (A1, E1, G1, K1)]]-->
* [[Digital Logic|Lab 5 &mdash; Digital Logic]]
<!--* [[Product Evaluation (Sensors 2.0)|Lab 3 &mdash; Product Evaluation (Sensors)]]-->
** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI-ELVIS Tutorial Video]
<!--* [[Product Evaluation and Quality Improvement (EV3)|Lab 3 &mdash; Product Evaluation and Quality Improvement (A1, E1, G1, K1)]]
* Lab 6 &mdash; Model Shop Session
** [[Media:EV3_Green.docx|Green (EV3)]] {{bull}} [[Media:EV3_Red.docx|Red (EV3)]] {{bull}} [[Media:EV3_Yellow.docx|Yellow (EV3)]]-->
* [[Electronic Filters|Lab 7 &mdash; Electronic Filters (Select Sections Only)]]
*[[Computer Aided Design (CAD) Competition|Lab 4 &mdash; CAD Competition]]
* [[Renewable Energy Competition|Lab 7 &mdash; Renewable Energy Competition (Select Sections Only)]]
** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]
* [[Lemon Car Competition|Lab 8 &mdash; Lemon Car Competition]]
** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
* Lab 9 &mdash; Model Shop Session
* [[Prototyping with Micro-controllers, Sensors, and Materials|Lab 5 &mdash; Prototyping with Micro-controllers, Sensors, and Materials]]
* [[Boom Construction Competition|Lab 10 &mdash; Boom Construction Competition]]
**[https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]
* [[Heat Transfer and Thermal Insulation Competition|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
<!--* [[Sensors (EV3)| Lab 4 &mdash; Sensors (EGED III Only)]]-->
** [[Media:Therm VI.vi|Therm VI]]
* Lab 6 &mdash; Model Shop Session I
** [[How to Handle Unusual Data]]
* [[Introduction to LabVIEW|Lab 7 &mdash; Introduction to LabVIEW]]
* [[Digital Logic|Lab 8 &mdash; Digital Logic]]
** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]
* Lab 9 &mdash; Model Shop Session II
* [[Sustainable Energy Vehicle Competition|Lab 10 &mdash; Sustainable Energy Vehicle Competition]]
* [[Biomedical Forensics|Lab 11 &mdash; Biomedical Forensics]]
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== PowerPoint Presentations ===
=== PowerPoint Presentations ===
* [[Media:SW_For_EngrsI.pptx|Lab 1A&amp;1B &mdash; Software for Engineers]]<br /><span style="margin-bottom: 0.2em; display: inline-block;">&nbsp;</span>
* [[Media:SW_For_Engrs (6).pptx|Lab 1A &amp; 1C &mdash; Software for Engineers]]
* [[Media:MouseTrap.pptx|Lab 1C &mdash; Mousetrap Vehicle Competition]]
* [[Media:Virtual Product Dissection.pptx|Lab 1B &mdash; Virtual Product Dissection]]
* [[Media:Balloon.pptx|Lab 2 &mdash; Hot Air Balloon Competition]]
* [[Media:Boom Construction Competition.pptx|Lab 2 &mdash; Boom Construction Competition]]
* [[Media:QualImprov.pptx|Lab 3 &mdash; Product Evaluation & Quality Improvement]]<br /><span style="margin-bottom: 0.75em; display: inline-block;">&nbsp;</span>
<!--* [[Media:PESensorsA2K2.pptx|Lab 3 &mdash; Product Evaluation (A3, B, C, D, E2, E3, G2, K2, K3, UAI)]] -->
* [[Media:LabVIEW.pptx|Lab 4 &mdash; Introduction to LabVIEW (EG1003 Only)]]
* [[Media:Lab3_Sensors_Fall_2018.pptx|Lab 3 &mdash; Product Evaluation]]
* [[Media:Sensors_NXT.pptx|Lab 4 &mdash; Sensors (EGED III Only)]]
<!--* [[Media:QualImprov.pptx|Lab 3 &mdash; Product Evaluation & Quality Improvement (A1, E1, G1, K1)]] -->
* [[Media:Digital_Logic.pptx|Lab 5 &mdash; Digital Logic]]<br /><span style="margin-bottom: 0.75em; display: inline-block;">&nbsp;</span>
<!--* [[Media:Lab3_Sensors_Summer_2018.pptx|Lab 3 &mdash; Product Evaluation (Summer 2018 Sections Y2, Y3)]] -->
* Lab 6 &mdash; Model Shop Session
* [[Media:CAD_Lab_Presentation.pptx|Lab 4 &mdash; CAD Competition]]
* [[Media:Electronic_Filters.pptx|Lab 7 &mdash; Electronic Filters (Select Sections Only)]]
* [[Media:Prototyping_Actual.pptx|Lab 5 &mdash; Prototyping with Micro-controllers, Sensors, and Materials]]
* [[Media:Renewable_Energy.pptx|Lab 7 &mdash; Renewable Energy Competition (Select Sections Only)]]
* Lab 6 &mdash; Model Shop Session I
* [[Media:Lemon_car.pptx|Lab 8 &mdash; Lemon Car Competition]]
* [[Media:LabVIEW_(3) (1).pptx|Lab 7 &mdash; Introduction to LabVIEW]]
* Lab 9 &mdash; Model Shop Session
* [[Media:Digital_Logic.pptx|Lab 8 &mdash; Digital Logic]]
* [[Media:Boom.pptx|Lab 10 &mdash; Boom Construction Competition]]
* Lab 9 &mdash; Model Shop Session II
* [[Media:Heatxfer.pptx|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
* [[Media:Renewables_Presentation.pptx|Lab 10 &mdash; Sustainable Energy Vehicle Competition]]
* [[Media:DNA_Forensics.pptx|Lab 11 &mdash; Biomedical Forensics]]
<!--* [[Media:Heatxfer.pptx|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]-->
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 78: Line 85:
=== Project Information ===
=== Project Information ===
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
* [[Media:SLDPs.pptx|Introduction to the Semester-Long Design Projects]]
<!-- * [[Media:SLDPs.pptx|Introduction to the Semester-Long Design Projects]] -->
* [[Spring 2016 Project Configurations]]
* [[Media:SLDPs_2019_Fall.pptx|Introduction to the Semester-Long Design Projects]]
* [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]
* [[Spring 2019 Project Configurations]]
* [[Media:Open Lab Rules.pdf|Open Lab Rules]]
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly and Design Challenge (RAD)]]
* [[NYU-Housing & Innovation in Revit (HIR)|NYU-Housing & Innovation in Revit (HIR)]]
** [[Media:Revit_How_To_Guide.pdf|Revit How-To]]
** [[Media:LEEDchecklist.docx|LEED Checklist]]
** [[Media:How_to_Make_an_STL_File_from_a_Revit_File.pdf|How to make an STL File from a Revit File]]
<!-- ** [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]] -->
* [[Bomb Disarming Robot (BDR)]]
* [[Bomb Disarming Robot (BDR)]]
* [[Disaster Relief Robot (DRR)]]
* [[Mars Rover Robot (MRR)|Mars Rover Robot (MRR)]]
* [[Mars Rover Robot (MRR)|Mars Rover Robot (MRR)]]
* [[Retrieval and Delivery System (RDS)]]
* [[Retrieval and Delivery System (RDS)]]
<!--* [[Railroad Train Guidance System (RTGS)|Railroad Train Guidance System (RTGS)]]-->
* [[Security Infiltration Drone (SID)|Security Infiltration Drone (SID)]]
** [[Media:SID_TS_Guide.docx|SID Troubleshooting Guide]]
* [[Supermarket Logistics System (SLS)|Supermarket Logistics System (SLS)]]
** [[Media:LEEDchecklist.docx|LEED Checklist]]
* [[Search & Recovery Robot (SRR)]]
* [[Search & Recovery Robot (SRR)]]
* [[Media:Open Lab Rules.pdf|Open Lab Rules]]
* [[Biomedical Device (BMD)|Biomedical Device (BMD)]]
* [[3D Printing Extra Credit]]
 
<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
* [[Invention Innovation and Entrepreneurship (I2E)|Invention, Innovation, and Entrepreneurship (I2E) (Section A2 Only)]]-->
 




Line 100: Line 111:
=== Project Submission ===
=== Project Submission ===
* [[Submission Guidelines]]
* [[Submission Guidelines]]
* [[Media:Early.docx|Project Submission Form]]
* [[Online Submission FAQs]]


=== Help & How-Tos ===
=== Help & How-Tos ===
* [[Media:3D Print Guide.pdf|3D Printing Guide]]
* [[3D Printing Guide]]
* [[ Makerbot Guide ]]
* [[Cura Guide|3D Printing Cura Guide]]
* [[Media:Teamwork Agreement.docx|Teamwork Agreement Instructions]]
* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]
* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]
* [[Media:MSProj Student Guide.pptx|Microsoft Project Student Guide Presentation]]
* [[Media:MSProj Student Guide.pptx|Microsoft Project Student Guide Presentation]]
* [[Sensors (EV3)]]
* [[Sensors (EV3)]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Training.pptx|Sensors Training]]
* [[AutoCAD Skill Builder]]
* [[AutoCAD Skill Builder]]
* [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
* [[Lego Digital Designer Skill Builder]]
* [[How to plan the schedule and calculate costs for a project]]
* [[How to plan the schedule and calculate costs for a project]]
<!--* [[I2E Kit Components]]-->
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[Lego Digital Designer Skill Builder]]
* [[How to Show Cost Data in Presentations]]
* [[How to Show Cost Data in Presentations]]
* [[Media:DMMGuidelines.docx|Digital Multi-Meters Guidelines]]
* [[Robot Construction Tips|Robot Construction Tips]]
* [https://docs.google.com/spreadsheets/d/1X-Sj3W7rKKYeUzUMY5eqmQMuMU6Gh1op5HMCAlGhO-I/edit?ts=5d76dbee#gid=682782030 Technical Online Library]
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 137: Line 155:
* [[Punctuation]]
* [[Punctuation]]
* [[The Use of Articles]]
* [[The Use of Articles]]
* [[Media:WC_Grading_Rubric.docx| WC Lab Report Rubric]]
* [[Media:WC_FDR_Rubric_Blank.docx| WC RAD FDR Rubric]]
==== WC Presentations ====
==== WC Presentations ====
* [[Media:How_To_Write_a_Lab_Report_in_EG.ppt|How to Write Lab Reports in EG1003]]
* [[Media:How_To_Write_a_Lab_Report_in_EG_2018.pptx|How to Write Lab Reports in EG1003]]
* [[Media:passivevoice.ppt|Passive Voice]]
* [[Media:passivevoice.pptx|Passive Voice]]
* [[Media:Citingsources.ppt|Citing Sources]]
* [[Media:Citingsources.pptx|Citing Sources]]
* [[Media:numbers.ppt|Formatting Numbers]]
* [[Media:Format_Numbers.pptx|Formatting Numbers]]
* [[Media:capitals.ppt|Using Capital Letters]]
* [[Media:Capitals.pptx|Using Capital Letters]]
* [[Media:verbs.ppt|Verb Tense in Lab Reports]]
* [[Media:verbs.ppt|Verb Tense in Lab Reports]]
* [[Media:professionaltone.ppt|Professional Tone]]
* [[Media:professionaltone.pptx|Professional Tone]]
* [[Media:Writing_an_Effective Resume.ppt|Resumes]]
* [[Media:Writing_an_Effective Resume.pptx|Resumes]]
* [[Media:combining.ppt|Sentence Combining]]
* [[Media:combining.ppt|Sentence Combining]]
* [[Media:commause.ppt|Commas]]
* [[Media:commause.ppt|Commas]]
Line 159: Line 179:
===== Regular Lab =====
===== Regular Lab =====
* [[Lab 1701|Lab 1701 - Faster-than-light Travel]]
* [[Lab 1701|Lab 1701 - Faster-than-light Travel]]
* [[Media:Eglabrpt1701a.doc|Annotated lab report]]
* [[Media:Lab1701a.pdf|Annotated lab report]]
* [[Media:Lab1701a.ppt|Annotated presentation]]
* [[Media:Lab1701a.ppt|Annotated presentation]]
* [[Media:Lab1701.ppt|Presentation]]
* [[Media:Lab1701.ppt|Presentation]]
Line 165: Line 185:
===== Competition Lab =====
===== Competition Lab =====
* [[Lab 500|Lab 500 - Stock Car Racer]]
* [[Lab 500|Lab 500 - Stock Car Racer]]
* [[Media:Eglabrpt500a.doc|Annotated lab report]]
* [[Media:Eglabrpt500a.pdf|Annotated lab report]]
* [[Media:Lab500a.ppt|Annotated presentation]]
* [[Media:Lab500a.ppt|Annotated presentation]]
* [[Media:Lab500.pptx|Presentation]]
* [[Media:Lab500.pptx|Presentation]]
Line 173: Line 193:
===== Design Project =====
===== Design Project =====
This section is still under construction. Sample SLDP documents will be posted as they become available.
This section is still under construction. Sample SLDP documents will be posted as they become available.
* [[Mock SLDP]]
* [[Media:MockMS1.pptx|Milestone 1]]
* [[Media:MockMS1.pptx|Milestone 1]]
* [[Media:MockMS2.pptx|Milestone 2]]
* [[Media:MockMS2.pptx|Milestone 2]]
Line 181: Line 200:
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">
=== Technical Presentations ===
=== Technical Presentations ===
* [[EG1003 Lab Presentation Format]]
* [[EG1003 Lab Presentation Format]]
Line 198: Line 218:


== Feedback ==
== Feedback ==
If you have any comments or questions about this manual [mailto:editor@eg.poly.edu click here to send us a message]. Please include something in the subject line indicating what your comment is.
Do you have a specific change you would like to see? [https://docs.google.com/forms/d/e/1FAIpQLSdgxEiYatlAqpXqnqpeBQ2dUkAUiMXziUQpqXRLlNrNjtaA7w/viewform Click here to let us know!]
 
<!--If you have any comments or questions about this manual [mailto:editor@eg.poly.edu click here to send us a message]. Please include something in the subject line indicating what your comment is.-->

Revision as of 07:15, 26 November 2019

Welcome to the EG1003 Online Lab Manual website. This site contains all the academic material you need for the course. For administrative matters such as lab report submission, please visit eg.poly.edu.

You can click on anything underlined on this page to link to the material.

Course Information


Laboratory Experiments


Semester-Long Design Project


Help & How-Tos

Sample Work

This section contains two imaginary labs and typical submissions that would be associated with them.

Design Project

This section is still under construction. Sample SLDP documents will be posted as they become available.


Archived Pages

Pages kept for historical purposes can be found in The Archive.

Feedback

Do you have a specific change you would like to see? Click here to let us know!