Difference between revisions of "Main Page"

From EG1004 Lab Manual
Jump to: navigation, search
(Created HIR page)
(408 intermediate revisions by 8 users not shown)
Line 1: Line 1:
Welcome to the EG1003 Online Lab Manual website. This site contains all the academic material you need for the course. For administrative matters such as lab report submission, please visit [http://eg.poly.edu eg.poly.edu].
Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the [http://eg.poly.edu EG1003 website].
 
You can click on anything underlined on this page to link to the material.


== Course Information ==
== Course Information ==
<div style="float:left; width:45%; padding-right: 5%">
<div style="float:left; width:45%; padding-right: 5%">
=== General ===
* [[Perspectives on EG1003|Comments from Course Director]]
* [[Perspectives on EG1003|Comments from Course Director]]
* [[The Course]]
* [[The Course]]
* [[Structure]]
* [[Structure]]
* [[Absence and Lateness Policies]]
* [[Teamwork]]
* [[Teamwork]]
* [[Ethics]]
* [[Ethics]]
* [[Plagiarism]]
* [[How to Use the EG1003 Websites]]
* [[How to Use the EG1003 Websites]]
* [[How to Submit Work to the EG1003 Website]]
* [[How to Submit Work to the EG1003 Website]]
* [[EG Grading Policy]]
* [[Media:Safety_Guidelines_2020.pptx|Safety Guidelines]]
* [[Safety Guidelines]]
<!--* [[Media:Safety Guidelines V2.pptx|Safety Guidelines Presentation]]-->
* [[Keeping a Laboratory Notebook]]
 
* [[Software Requirements]]
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">
=== PowerPoint Presentations ===
 
* [[Media:Introduction_to_EG.pptx|Introduction to EG1003]]
=== Syllabus Content  ===
* [[Media:Introduction_to_EG_-_BC.pptx|Introduction to EGED I]]
<!--* [[Media:Introduction to EG1003.pptx|Introduction to EG1003]]-->
* [[Media:Introduction_to_EGEDII.pptx|Introduction to EGED II]]
<!--* [[Media: Introduction to EG1003 (Summer).pptx|Introduction to EG1003]]
* [[Media:Introduction_to_EGEDIII.pptx|Introduction to EGED III]]
[[Media: Introduction to EG1003 (Summer) (Virtual).pptx|Introduction to EG1003 (Virtual)]]-->
* [[Media:Academic_honesty.pptx|Academic Honesty and Plagiarism]]
* [[Media:INTRODUCTION_TO_EG1003_Fall_2020.pptx|Introduction to EG1003]]
* [[Media:Safety_Guidelines.pptx|Safety Guidelines]]
* [[Media:Introduction_to_EGEDIII_fall_2020.pptx|Introduction to EGED III]]
* [[Media:Showcase.pptx|Display Case Presentation]]
<!--* [[Media:Introduction_to_EGEDIII.pptx|Introduction to EGED III]]-->
* [https://docs.google.com/document/d/1a1MSIiIpc8oDM_V0qH4M26D42yTh16s71tl1Gfc3d3g/export?format=pdf EG1003 Syllabus]
<!--[[Media:EG1003_Academic Honesty and Plagiarism.pptx|Academic Honesty and Plagiarism]]-->
* [[Media:ACADEMIC_HONESTY_&_PLAGIARISM_Fall_2020.pptx|Academic Honesty and Plagiarism]]
* [[EG Grading Policy | Grading Policy]]
* [[Absence and Lateness Policies]]
* [[Software Requirements]]
<!--* [[Media:Introduction_to_EG_-_BC.pptx|Introduction to EGED I]]
* [[Media:Introduction_to_EGEDII.pptx|Introduction to EGED II]]-->
 
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 34: Line 39:
<div style="float:left; width:45%; padding-right: 5%">
<div style="float:left; width:45%; padding-right: 5%">
=== Write-ups ===
=== Write-ups ===
* [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
* Lab 1
* [[Introduction_to_3D_Printing_Inventor|Lab 1B &mdash; Introduction to 3D Printing]]
** [[Introduction to Microsoft Office|Lab 1A &mdash; Introduction to Microsoft Office]]
* [[Mousetrap Vehicle Competition|Lab 1C &mdash; Mousetrap Vehicle Competition]]
** [[Introduction_to_3D_Printing|Lab 1B &mdash; Introduction to 3D Printing]]
* [[Hot Air Balloon Competition|Lab 2 &mdash; Hot Air Balloon Competition]]
* Lab 2
** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]
** [[Computer Aided Design (CAD) Competition|Lab 2 &mdash; CAD Competition]]
* [[Prototyping with Microcontrollers and Sensors|Lab 3 &mdash; Prototyping with Microcontrollers and Sensors (Section A2 Only)]]  
*** [https://stream.nyu.edu/media/EG+1003+Lab+3A+3D+Modeling+and+Design/1_sgq36ht8/34608091 3D Modeling and CAD Video]
* [[Product Evaluation (Sensors)|Lab 3 &mdash; Product Evaluation (A3, B, C, D, E2, E3, G2, K2, K3, UAI)]]
*** [[Media:Introduction to CAD Guide.pptx|CAD Guide]]
* [[Product Evaluation (Select Sections Only)|Lab 3 &mdash; Product Evaluation (A1, E1, G1, K1)]]
<!--* [[Product Evaluation|Lab 3 &mdash; Product Evaluation]]-->
<!--* [[Product Evaluation (Sensors 2.0)|Lab 3 &mdash; Product Evaluation (Sensors)]]-->
* Lab 3  
<!--* [[Product Evaluation and Quality Improvement (EV3)|Lab 3 &mdash; Product Evaluation and Quality Improvement (A1, C1, K1, G1, E1, BCS)]]
** [[Prototyping with Microcontrollers, Sensors, and Materials|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
** [[Media:EV3_Green.docx|Green (EV3)]] {{bull}} [[Media:EV3_Red.docx|Red (EV3)]] {{bull}} [[Media:EV3_Yellow.docx|Yellow (EV3)]]-->
** [[Prototyping with Microcontrollers, Sensors, and Materials (Virtual)|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]
* [[Introduction to LabVIEW|Lab 4 &mdash; Introduction to LabVIEW]]
*** [https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]
**[https://stream.nyu.edu/media/EG+1003+Lab+4A+3D+Printing+and+Prototyping/1_hb8q9n70 3D Printing and Prototyping Video]
* Lab 4
<!--* [[Sensors (EV3)| Lab 4 &mdash; Sensors (EGED III Only)]]-->
** [[Virtual Product Dissection|Lab 4A &mdash; Virtual Product Dissection]]
* [[Digital Logic|Lab 5 &mdash; Digital Logic]]
** Lab 4B &mdash; Model Shop Session I
** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]
* Lab 5
* Lab 6 &mdash; Model Shop Session
** [[Sustainable Energy Vehicle Competition|Lab 5 &mdash; Sustainable Energy Vehicle Competition]]
* [[Sustainable Energy Vehicle Competition|Lab 7 &mdash; Sustainable Energy Vehicle Competition]]
** [[Sustainable Energy Vehicle Competition (Virtual)|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]
<!--* [[Electronic Filters|Lab 7 &mdash; Electronic Filters]] -->
*** [[Media:DMMGuidelines.docx|Digital Multimeters Guidelines]]
* [[Biomedical Forensics|Lab 8 &mdash; Biomedical Forensics]]
* Lab 6
<!--* [[Lemon Car Competition|Lab 8 &mdash; Lemon Car Competition]]-->
** Lab 6 &mdash; Model Shop Session II
* Lab 9 &mdash; Model Shop Session
* Lab 7
* [[Boom Construction Competition|Lab 10 &mdash; Boom Construction Competition]]
** [[Boom Construction Competition|Lab 7 &mdash; Boom Construction Competition]]
<!--* [[Heat Transfer and Thermal Insulation Competition|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
** [[Boom Construction Competition (Virtual)|Lab 7 &mdash; Boom Construction Competition (Virtual)]]
** [[Media:Therm VI.vi|Therm VI]]
* Lab 8
** [[How to Handle Unusual Data]]-->
** [[Processes & Water Filters|Lab 8 &mdash; Processes & Water Filters]]
* [[Heat Transfer and Thermal Insulation Competition (Sensors)|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
** [[Processes & Water Filters (Virtual)|Lab 8 &mdash; Processes & Water Filters (Virtual)]]
** [[Media:Therm VI.vi|Therm VI]]
* Lab 9
** [[How to Handle Unusual Data]]
** Lab 9 &mdash; Model Shop Session III
* Lab 10
** [[Introduction to LabVIEW & Digital Logic|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic]]
** [[Introduction to LabVIEW & Digital Logic (Virtual)|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]
*** [https://stream.nyu.edu/media/EG+1003+Lab+5A+NI+ELVIS+Tutorial/1_36717xpx NI ELVIS Tutorial Video]
* Lab 11
** [[Biomedical Forensics|Lab 11 &mdash; Biomedical Forensics]]
** [[Biomedical Forensics (Virtual)|Lab 11 &mdash; Biomedical Forensics (Virtual)]]
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== PowerPoint Presentations ===
=== PowerPoint Presentations ===
* [[Media:SW_For_EngrsI.pptx|Lab 1A&amp;1B &mdash; Software for Engineers]]
* Lab 1
* [[Media:MouseTrap.pptx|Lab 1C &mdash; Mousetrap Vehicle Competition]]
** [[Media:Lab_1A&B_Software_for_Engineers.pptx|Lab 1A &amp; 1B &mdash; Software for Engineers]]
* [[Media:Balloon.pptx|Lab 2 &mdash; Hot Air Balloon Competition]]
* Lab 2
* [[Media:Arduino_Lab_updated.pptx|Lab 3 &mdash; Prototyping with Microcontrollers and Sensors (Section A2 Only)]]
** [[Media:CAD_Competition_Fall2020.pptx|Lab 2 &mdash; CAD Competition]]
* [[Media:PESensorsA2K2.pptx|Lab 3 &mdash; Product Evaluation]]
<!--* [[Media:CAD Competition.pptx|Lab 4 &mdash; CAD Competition]]-->
<!--* [[Media:QualImprov.pptx|Lab 3 &mdash; Product Evaluation & Quality Improvement (Select Sections Only)]]-->
<!--* [[Media:Product Evaluation.pptx|Lab 3 &mdash; Product Evaluation]]-->
* [[Media:LabVIEW.pptx|Lab 4 &mdash; Introduction to LabVIEW]]
* Lab 3
<!--* [[Media:Sensors_NXT.pptx|Lab 4 &mdash; Sensors (EGED III Only)]]-->
** [[Media:Prototyping_with_Microcontrollers,_Sensors,_and_Materials_Fall2020.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials]]
* [[Media:Digital_Logic.pptx|Lab 5 &mdash; Digital Logic]]
** [[Media:Prototyping_with_Microcontrollers,_Sensors,_and_Materials_Virtual_Fall2020.pptx|Lab 3 &mdash; Prototyping with Microcontrollers, Sensors, and Materials (Virtual)]]
* Lab 6 &mdash; Model Shop Session
* Lab 4
* [[Media:Sustainable_Energy.pptx|Lab 7 &mdash; Sustainable Energy Vehicle Competition]]
** [[Media:Virtual Product Dissection V2.pptx|Lab 4A &mdash; Virtual Product Dissection]]
<!--* [[Media:Electronic_Filters.pptx|Lab 7 &mdash; Electronic Filters]]-->
** Lab 4B &mdash; Model Shop Session I
* [[Media:Biomedical Forensics.pptx|Lab 8 &mdash; Biomedical Forensics]]
* Lab 5
<!--* [[Media:Lemon_car.pptx|Lab 8 &mdash; Lemon Car Competition (Select Sections Only)]]-->
** [[Media:Sustainable Energy Vehicle Competition V2.pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition]]
* Lab 9 &mdash; Model Shop Session
** [[Media: Sustainable_Energy_Vehicle_Competition_(Virtual)_(1.4).pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]
* [[Media:Boom.pptx|Lab 10 &mdash; Boom Construction Competition]]
<!--* [[Media:Sustainable Energy Vehicle Competition (Virtual).pptx|Lab 5 &mdash; Sustainable Energy Vehicle Competition (Virtual)]]-->
<!--* [[Media:Heatxfer.pptx|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]-->
* Lab 6
* [[Media:Heatxfer_n.pptx|Lab 11 &mdash; Heat Transfer and Thermal Insulation Competition]]
** Lab 6 &mdash; Model Shop Session II
* Lab 7
** [[Media:Boom Construction Competition V2.pptx|Lab 7 &mdash; Boom Construction Competition]]
** [[Media:Boom Construction Competition (Virtual).pptx|Lab 7 &mdash; Boom Construction Competition (Virtual)]]
* Lab 8
** [[Media: Processes_and_Water_FIlters_Fall_2020.pptx|Lab 8 &mdash; Processes & Water Filters]]
** [[Media: Processes & Water Filters (Virtual).pptx|Lab 8 &mdash; Processes & Water Filters (Virtual)]]
* Lab 9
** Lab 9 &mdash; Model Shop Session III
* Lab 10
** [[Media:Introduction to LabVIEW & Digital Logic.pptx|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic]]
** [[Media:Introduction to LabVIEW & Digital Logic (Virtual).pptx|Lab 10 &mdash; Introduction to LabVIEW & Digital Logic (Virtual)]]
* Lab 11
** [[Media:Biomedical Forensics V2.pptx|Lab 11 &mdash; Biomedical Forensics]]
** [[Media:Biomedical_Forensics_(Virtual)_(1.2).pptx|Lab 11 &mdash; Biomedical Forensics (Virtual)]]
</div>
</div>
<br clear="both" />
<br clear="both" />
Line 92: Line 118:
=== Project Information ===
=== Project Information ===
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
''Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.''
* [[Media:SLDPs.pptx|Introduction to the Semester-Long Design Projects]]
<!--* [[Media:Introduction to the Semester-Long Design Projects (SLDPs).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
* [[Fall 2017 Project Configurations]]
* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
* [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]
* [[Media:Introduction to the Semester-Long Design Projects (SLDPs) (Summer) (Virtual).pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]-->
* [[Bomb Disarming Robot (BDR)]]
* [[Media:INTRODUCTION_TO_THE_SEMESTER_LONG_DESIGN_PROJECT_Fall_2020.pptx|Introduction to the Semester-Long Design Projects (SLDPs)]]
<!--* [[Disaster Relief Robot (DRR)]]-->
<!--* [[Spring 2020 Configurations]]-->
* [[Mars Rover Robot (MRR)|Mars Rover Robot (MRR)]]
<!--* [[Media:Open Lab Rules.pdf|Open Lab Rules]]-->
* [[Retrieval and Delivery System (RDS)]]
* [[Rapid Assembly and Design Challenge (RAD)|Rapid Assembly & Design Challenge (RAD)]]
* [[Security Infiltration Drone (SID)|Security Infiltration Drone (SID)]]
* [[Biomedical Device (BMD)|Biomedical Device (BMD)]]
** [[Media:SID_TS_Guide.docx|SID Troubleshooting Guide]]
* [[Housing and Innovation in Revit (HIR)|Housing & Innovation in Revit (HIR)]]
* [[Subterranean Infiltrator & Fortune Retriever (SIFR)|Subterranean Infiltrator & Fortune Retriever (SIFR)]]
** [[Media:Revit_How_To_Guide.pdf|Revit How-To]]
* [[Search & Recovery Robot (SRR)]]
<!--** [[Media:How_to_Make_an_STL_File_from_a_Revit_File.pdf|How to Make an STL File From a Revit File]]-->
* [[Media:Open Lab Rules.pdf|Open Lab Rules]]
<!--** [[Autonomous Underwater Vehicle (AUV)|Autonomous Underwater Vehicle (AUV)]]
* [[Bomb Disarming Robot (BDR)]]  
* [[Retrieval and Delivery System (RDS) | Retrieval & Delivery System (RDS)]]  
* [[Search & Recovery Robot (SRR)]]  
* [[VEX Mars Rover Robot (MRR)| Mars Rover Robot (MRR)]]
** [[VEX Building Guide]]
** [[VEX CAD Assembly Guide]]
** [[VEX Library Guide]]
** [[Media:Vex_Price_Sheet.xlsx|Price list for VEX parts for robot projects]]-->
=== Project Submission ===
* [[Submission Guidelines]]
* [[Online Submission FAQs]]


* [[Supermarket Logistics System (SLS)|Supermarket Logistics System (SLS)]]
<!--* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
* [[NYU-Housing & Innovation in Revit (HIR)|NYU-Housing & Innovation in Revit (HIR)]]
* [[Invention Innovation and Entrepreneurship (I2E)|Invention, Innovation, and Entrepreneurship (I2E) (Section A2 Only)]]-->
** [[Media:Revit.pdf|Revit How-To]]
** [[Media:LEEDchecklist.docx|LEED Checklist]]


* [[Media:I2E_SLDPs.pptx|Introduction to the Invention, Innovation, and Entrepreneurship Semester-Long Design Projects (Section A2 Only)]]
* [[Invention Innovation and Entrepreneurship (I2E)|Invention, Innovation, and Entrepreneurship (I2E) (Section A2 Only)]]




Line 117: Line 150:
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-left:5%">


=== Project Submission ===
=== Help & How-Tos ===
* [[Submission Guidelines]]
 
* [[Media:Early.docx|Project Submission Form]]
==== General SLDP ====
* [[Online Submission FAQs]]
* [[Media:Teamwork_Agreement2020.docx|Teamwork Agreement]]
* [[Media:Microsoft_Project_Student_Guide.pptx|Microsoft Project Student Guide]]
<!--* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]-->
* [[Planning Project Scheduling & Costs]]
* [[How to Show Cost Data in Presentations]]
* [[Keeping an Engineering Notebook]]


=== Help & How-Tos ===
==== Prototyping ====
* [[3D Printing Extra Credit]]
* [[Prototyping Guide]]
* [[Cura Guide|3D Printing Cura Guide]]
* [[Cura Guide|3D Printing Cura Guide]]
* [[Media:Teamwork Agreement.docx|Teamwork Agreement Instructions]]
<!--*LEGO EV3
* [[Media:MS Project Cheatsheet.pdf|Microsoft Project Summary Sheet]]
* [[Robot Construction Tips|Robot Construction Tips]]
* [[Media:MSProj Student Guide.pptx|Microsoft Project Student Guide Presentation]]
* [[Lego Digital Designer Skill Builder]]
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[Sensors (EV3)]]
* [[Sensors (EV3)]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Tutorial.pdf|Sensors Tutorial]]
* [[Media:Sensors Training.pptx|Sensors Training]]
* [[Media:Sensors Training.pptx|Sensors Training]]-->
* [[AutoCAD Skill Builder]]
 
* [[Lego Digital Designer Skill Builder]]
==== Technical Help ====
* [[How to plan the schedule and calculate costs for a project]]
* [[Virtual Circuit Simulation Guide]]
* [[I2E Kit Components]]
* [https://docs.google.com/spreadsheets/d/1X-Sj3W7rKKYeUzUMY5eqmQMuMU6Gh1op5HMCAlGhO-I/edit?ts=5d76dbee#gid=682782030 Technical Online Library]
* [[Media:Legoprice.xlsx|Price list for Lego parts for robot projects]]
* [[Arduino Coding Guide]]
* [[How to Show Cost Data in Presentations]]
* [[Media:DMMGuidelines.docx|Digital Multi-Meters Guidelines]]
</div>
</div>
<br clear="both" />
<br clear="both" />


== Help & How-Tos ==
== Recitation Resources ==
<div style="float:left; width:45%; padding-right:5%">
 
=== Technical Writing ===
<div style="float:left; width:45%; padding-right: 5%">
* [[What Is It?]]
* [[Your Audience and Purpose]]
* [[Introduction]]
* [[Lab Report Format]]
* [[Introductions and Conclusions]]
* [[Active and Passive Voice]]
* [[Creating a Logical Argument]]
* [[Descriptions - Mechanism and Process]]
* [[Writing Numbers, Units of Measure, and Equations]]
* [[Graphics in Technical Reports]]
* [[Writing Software Documentation]]
* [[How to Write an Effective Resume]]
* [[Persuasion]]
* [[Team Authoring Strategies]]
* [[Editing]]
* [[Punctuation]]
* [[The Use of Articles]]
==== WC Presentations ====
* [[Media:How_To_Write_a_Lab_Report_in_EG.ppt|How to Write Lab Reports in EG1003]]
* [[Media:passivevoice.ppt|Passive Voice]]
* [[Media:Citingsources.ppt|Citing Sources]]
* [[Media:numbers.ppt|Formatting Numbers]]
* [[Media:capitals.ppt|Using Capital Letters]]
* [[Media:verbs.ppt|Verb Tense in Lab Reports]]
* [[Media:professionaltone.ppt|Professional Tone]]
* [[Media:Writing_an_Effective Resume.ppt|Resumes]]
* [[Media:combining.ppt|Sentence Combining]]
* [[Media:commause.ppt|Commas]]
* [[Media:Writing_Teamwork.ppt|Writing Consultant Teamwork Presentation]]
* [[Media:Introductions.ppt|Introductions]]
</div>
<div style="float:left; width:45%; padding-left:5%">


==== Sample Work ====
<!--==== Sample Work ====
This section contains two imaginary labs and typical submissions that would be associated with them.
This section contains two imaginary labs and typical submissions that would be associated with them.
* [[Introduction to the Sample Labs]]
* [[Introduction to the Sample Labs]]
Line 203: Line 208:
</div>
</div>
</div>
</div>
<div style="float:left; width:45%; padding-left:5%">
<div style="float:left; width:45%; padding-right:5%">-->
=== Technical Presentations ===
=== Weekly Presentations ===
* [[EG1003 Lab Presentation Format]]
* [[Media: REC1_EG1003_FALL2020_(4.1).pptx|Recitation 1: What is engineering?]]
* [[Media:Recitation_format.pptx|How to Give a Recitation Presentation]]
* [[Media: REC2_EG1003_FALL2020_(1).pptx|Recitation 2: Technical Writing]]
* [[EG1003 Project Milestone Presentation Format]]
* [[Media: REC3_EG1003.pptx|Recitation 3: Professional Presentations]]
* [[Media:Eg_milestones.pptx|How to give a Milestone Presentation]]
* [[Media: REC4_EG1003_FALL2020.pptx|Recitation 4: Engineering Ethics]]
* [[Media:Eg_final.pptx|How to give the Final Project Presentation]]
* [[Media: REC5_EG1003_(1).pptx|Recitation 5: Software & Metacognition]]
* [[Giving Effective Presentations]]
* [[Media: REC6_EG1003_(1).pptx|Recitation 6: Engineering Design Process]]
* [[Media: REC7_EG1003.pptx|Recitation 7: Analysis & Reflection]]
* [[Media: REC8_EG1003.pptx|Recitation 8: Undergraduate Opportunities]]
* [[Media: REC9_EG1003.pptx|Recitation 9: Career Considerations]]
* [[Media: REC10_EG1003.pptx|Recitation 10: Graduate School]]
* [[Media: REC11_EG1003.pptx|Recitation 11: Data Visualization]]
* [[Media: REC12_EG1003.pptx|Recitation 12: Emerging Engineering Topics]]
* [[Media: REC13_EG1003.pptx|Recitation 13: Entrepreneurial Mindset]]
 
=== Additional Resources ===
* [[EG1003 Lab Presentation Format | Lab Presentation Format]]
<!--* [[Media:How to Give a Recitation Presentation V2.pptx|How to Give a Recitation Presentation]]
* [[Media:How to Give a Recitation Presentation (Virtual).pptx|How to Give a Recitation Presentation (Virtual)]]-->
* [[Media:HOW_TO_GIVE_A_RECITATION_PRESENTATION_Fall_2020.pptx|How to Give a Recitation Presentation]]
* [[EG1003 Project Milestone Presentation Format | Milestone Presentation Format]]
* [[Media:HOW_TO_GIVE_A_MILESTONE_PRESENTATION_Fall_2020.pptx|How to Give a Milestone Presentation]]
<!--* [[Media:How to Give a Milestone Presentation.pptx|How to Give a Milestone Presentation]]-->
* [[Media:HOW_TO_GIVE_THE_FINAL_PROJECT_PRESENTATION_Fall_2020.pptx|How to Give a Final Presentation]]
<!--* [[Media:How to Give a Final Presentation.pptx|How to Give a Final Presentation]]-->
* [[Effective Slide Formats]]
* [[Effective Slide Formats]]
* [[Giving the Presentation]]
* [[Giving the Presentation]]
* [[Blunders to Avoid]]
* [[Blunders to Avoid]]
</div>
<div style="float:left; width:45%; padding-left:5%">
=== Writing Resources ===
<!--* [[What Is It?]]
* [[Your Audience and Purpose]]
* [[Persuasion]]
* [[Creating a Logical Argument]]
* [[Writing Software Documentation]]-->
<!--* [[Introduction]]
* [[Lab Report Format]]
* [[Introductions and Conclusions]]
* [[Active and Passive Voice]]
* [[Descriptions - Mechanism and Process]]
* [[Writing Numbers, Units of Measure, and Equations]]
* [[Graphics in Technical Reports]]-->
<!--* [[How to Write an Effective Resume]]
* [[Team Authoring Strategies]]
* [[Editing]]
* [[Punctuation]]
* [[The Use of Articles]]-->
* [[Media:EG_1003_Writing_Style_Guide.docx| EG1003 Writing Style Guide]]
* [[Media:WC_Grading_Rubric(1).docx| WC Lab Report Rubric]]
* [[Media:WC_FDR_Rubric.docx| WC RAD FDR Rubric]]
* [[Media:WC_LEED_Report_Rubric(2).docx| WC LEED Report Rubric]]
* [[Media:EG_1003_Sample_Lab_Report_Hot_Air_Baloon_(3).docx| Sample Lab Report]]
<!--** [https://manual.eg.poly.edu/index.php/Hot_Air_Balloon_Competition Sample Lab Report Write-Up]-->
=== Writing Consultant Presentations ===
* [[Media:REC1_Writing_Lab_Reports_(1).pptx|Recitation 1: Writing Lab Reports]]
* [[Media:REC2_Citing_Sources.pptx|Recitation 2: Citing Sources]]
* [[Media:Recitation_Writing_as_an_Engineer.pptx|Recitation 3: Writing as an Engineer]]
* [[Media:Recitation_Lab_Report_Overview.pptx|Recitation 4: Lab Report Overview]]
* [[Media:Recitation_Storytelling.pptx|Recitation 5: Storytelling]]
* [[Media:Recitation_Data_is_Your_Story.pptx|Recitation 6: Data is Your Story]]
* [[Media:Recitation_Writing_as_a_Professional.pptx|Recitation 7: Writing as a Professional]]
* [[Media:Recitation_Team_Writing.pptx|Recitation 8: Team Writing]]
* [[Media:Recitation_Resumes.pptx|Recitation 9: Resumes]]
** [[Media:NYU_Wasserman_Resume_Guide_and_Samples.pdf|NYU Wasserman Resume Guide & Samples]]
* [[Media:Recitation_Writing_in_Engineering.pptx|Recitation 10: Writing in Engineering]]
</div>
</div>
<br clear="both" />
<br clear="both" />

Revision as of 12:02, 22 September 2020

Welcome to the EG1003 online student manual website. This site contains all the academic material you will need for the course. For administrative matters such as lab report submission, please visit the EG1003 website.

Course Information


Laboratory Experiments

Write-ups

PowerPoint Presentations


Semester-Long Design Project

Project Information

Please read the RFP for your project carefully. Any deviation from these specifications must be approved by your recitation professor.

Project Submission




Recitation Resources


Archived Pages

Pages kept for historical purposes can be found in The Archive.

Feedback

Do you have a specific change you would like to see? Click here to let us know!