Difference between revisions of "Autonomous Underwater Vehicle (AUV)"

From EG1003 Lab Manual
Jump to: navigation, search
(Copy and pasted in Shayan's AUV page update)
(Copy and pasted in Kaylee's AUV page update)
Line 4: Line 4:
  
 
{{SLDP: Outside Materials (Robots)}}
 
{{SLDP: Outside Materials (Robots)}}
 
 
= Introduction and Overview =
 
= Introduction and Overview =
The Untied Nations General Assembly 3rd committee Social, Hukanitarian The Space and Naval Warfare Systems Center (SSC) was created to encourage the development of technologies which facilitated the acquisition, transmittal and processing of information for the U.S. Navy.
 
  
The SSC has begun work on a new sea lab located, 20 miles off the south coast of New Fronts Ports, Florida. The new facility currently serves as home base for scientists, technicians and engineers charged with the facilities completion. When fully operational the base will serve as a port for naval and marine research. Completion of the new site poses many challenges for those teams assigned to complete construction. It is remote and the weather is brutal.
+
Australia Great Barrier Reef is one of the largest reefs in the world and the only living one that can be seen from space. This reef contains a massive collection of coral and underwater species making it an expansive ecosystem. Though due to rising water pollution and global warming the in the past few decades the Great Barrier Reef has lost over half its coral population, dangerous coral bleaching is damaging the ecosystem, and many species are at risk.
  
In order to free up the station's personnel for more important tasks, the SSC has requested a proposal for an autonomous underwater vehicle (AUV) that will be able to perform specific tasks at the sea lab and help speed completion of the project. The winning bid will be the one that is both innovative and cost effective. SCC anticipates using this robot on all its sea labs in the future.
+
The Great Barrier Reef Marine Park Authority (GBRMPA) has begun funding research and innovative technology that can help assist in cleaning up the nearby ocean waters and improve the overall health of the local ecosystem. GBRMPA has given funding to your team of researchers and scientists to develop an autonomous underwater vehicle (AUV) that can handle the pollution in the area. This device should focus on being innovative and cost effective.  
  
 
= Specifications =
 
= Specifications =
Line 20: Line 18:
 
* All revisions to the Mindstorms program must be recorded and explained.
 
* All revisions to the Mindstorms program must be recorded and explained.
  
The AUV must be able to navigate autonomously around the test tank. The robot must achieve <i>at least</i> <b>100 points in 5 minutes</b>. The tasks may be selected from the list of tasks below.
+
The AUV must be able to navigate autonomously around the test tank. The robot must achieve <i>at least</i> <b>100 points in 5 minutes</b>. The tasks may be selected from the list of tasks below.If additional tasks are completed AFTER receiving 100 points for commissioning extra credit will be awarded.  
  
The finished AUV must fit inside a 1 foot by 1 foot by 1 foot box. Any other components that the AUV uses, such as a tether, must also fit in the same box with the AUV.
+
The finished AUV must be less than a 1 foot by 1 foot by 1 foot. Any other components that the AUV uses, such as a tether, must also fit in the same box with the AUV.
  
The AUV must start in the starting area. The fish tank is divided into three sections; the starting area is the first section from the left side. The AUV may start anywhere in the starting area, at any depth, facing any direction. The AUV may not be touching any of the field objects during the initial start.
+
The AUV must start in the starting area, but at any depth, facing any direction. The AUV may not touch any of the modules from the starting position.
  
 
These specifications must be met for final commissioning. Please refer to the course syllabus for all due dates.
 
These specifications must be met for final commissioning. Please refer to the course syllabus for all due dates.
Line 31: Line 29:
 
[[Image:Auv1.jpg|thumb|750px|center|Figure 1: AUV navigation field]]<br style="clear: both;" />
 
[[Image:Auv1.jpg|thumb|750px|center|Figure 1: AUV navigation field]]<br style="clear: both;" />
  
Objects are placed at different locations across the terrain. The completion of each task listed below has a specified point value. Task numbers correspond to the location numbers on this map. Point values are also noted.
+
Tasks across the tank represent different areas of pollution and disaster that oceans are currently facing. The picture above illustrates each task and the point value associated with accomplishing the task, and the table bellow provides more information. Task numbers correspond to the location numbers on this map. Point values are also noted.
  
 
== AUV Tasks ==
 
== AUV Tasks ==
Line 37: Line 35:
 
|-
 
|-
 
!1
 
!1
|'''''Marine Plant Samples''''' &mdash; There are three unique indigenous plants that scientists have been wishing to acquire and study. Find as many of the plants as possible. Bring the plants to the surface of the water for '''5 points each''' bring them back into the starting base for an additional 10 points each (45 points max)'''
+
|'''''Lost Fish Nets''''' &mdash; Fishing companies have lost some nets in the ocean, these lost nets get caught in and on local wildlife, this can result in wildlife getting stuck and dying in them. Find as many of the nets as possible. Bringing the plants to the surface of the water will count for '''5 points each''' bring them back into the starting base for an additional 15 points each (60 points max)'''
 
|[[Image:Auv2.jpg]]
 
|[[Image:Auv2.jpg]]
 
|-
 
|-
 
!2
 
!2
|'''''Data Canisters''''' &mdash; There are six canisters located in the ocean. Two are located near the surface of the water near the starting zone; three are located under water; one was lost and is located under the Recovery Station. Transport these six canisters into the Recovery Station for '''10 points each (60 points max)'''
+
|'''''Clogged Inlet Pipe''''' &mdash; For most cities water comes from purifying local water supplies at water treatment plants, where an inlet pipe is located in the water to pump the water supply to the plant to begin treatment. The inlet pipe for this reverse osmosis plant, where salt water supplies are purified, has been clogged due to overpopulation of the nearby ocean water. Remove the plastic that has gotten stuck in the pipe for '''10 points'''
 
|[[Image:Auv3.jpg]]
 
|[[Image:Auv3.jpg]]
 
|-
 
|-
 
!3
 
!3
|'''''Oceanographic Sensor''''' &mdash; A critical new instrument has shifted from its anchor due to a tropical storm. Locate the sensor and return it to its original location. The original location is considered to be in the same tile as the oil spill pipeline. As long as the sensor touches the tile, the task is considered complete. This task is worth 20 points.
+
|'''''Wave Power Device''''' &mdash; Wave power generation technology are a type of hydroelectric device that uses the motion of the waves to move a turbine to generate electricity. One of these devices became unhinged and moved away from its station. Locate the power device and return it to its original location, a large metal platform at the ocean floor, as long as the device is moved above the station the task is considered complete. '''(15 points)'''
  
Note: Before testing, this sensor must be located at the middle of the tank, even if your group has decided to not attempt this task.
+
Note: Before testing, this sensor must be located to the misplaced location, even if your group has decided to not attempt this task.
 
|[[Image:Auv4.jpg]]
 
|[[Image:Auv4.jpg]]
 
|-
 
|-
 
!4
 
!4
|'''''Seismic Reading''''' &mdash; There is a seismic reader located near the base of the station. Since the lower portion of the sea lab is not yet completed the AUV must obtain the data manually by tipping the yellow flag. '''(10 points)'''
+
|'''''Installing solar panels''''' &mdash; Solar Panels can be made to float on top of the surface of the water to prevent evaporation of water resources and to not take up space on land. Install a solar panel at the location closer to the start for 15 points and install a solar panel at the farther location for 25 points, both panels can be installed. '''(40 points max)'''
 
|[[Image:auv5.jpg]]
 
|[[Image:auv5.jpg]]
 
|-
 
|-
 
!5
 
!5
|'''''Oil Spill''''' &mdash; There has been an oil spill next to the recovery station. The oil spill is simulated by a cracked pipe which releases bubbles. Your goal is to design a device that will prevent the spill (air bubbles) from being visible for three seconds. The device is still part of your dimension limitations. This task is worth '''40 points'''.
+
|'''''Repair the coral reef''''' &mdash; Coral grows on top of old coral but sue to the oceans being bleached these groups of coral are dying out and new coral is having a more difficult time growing. One solution is to install 3D printed coral on the ocean floor made out of environmentally safe filament. A piece of coral is considered installed when it is within an 3 cm of one of the metal pieces located in the coral field. '''(10 points per coral piece, maximum 30 points)'''
 +
|[[Image:auv5.jpg]]
 +
|-
 +
!6
 +
|'''''Plastic Trash''''' &mdash; Platic trash is lining the top of the ocean, each piece of plastic is worth 1 point for moving it to the start position, they are worth 2 points for containing it inside the robot or moving it into a 3D printed device. '''(1 point each to if moved to start, 2 points each for containing it)'''
 +
|[[Image:auv5.jpg]]
 +
|-
 +
!7
 +
|'''''Oil Spill''''' &mdash; There has been an oil spill due to a sunken ship. The oil spill is leaking out of a broken oil tank simulated with air bubbles. Your goal is to design a device that will prevent the spill (air bubbles) from being visible for three seconds. The device is still part of your dimension limitations. This task is worth '''20 points'''.
 
|[[Image:Auv11.jpg|thumb|200px|center]]
 
|[[Image:Auv11.jpg|thumb|200px|center]]
 
|}
 
|}
 
== Other Course Features ==
 
== Other Course Features ==
 
{| class="wikitable"
 
{| class="wikitable"
|'''''Recovery Station''''' &mdash; The repository for Data Canisters. A data canister is considered inside the Recovery Station when it is inside the yellow ring. A canister may be deposited inside the yellow ring from either above or below.</td>
+
|'''''Ocean Obstacles''''' &mdash; The ocean is filled with many things that can get in the way including plants on the ocean floor.</td>
 
|[[Image:Auv8.jpg]]
 
|[[Image:Auv8.jpg]]
 
|}
 
|}
  
 
== Important ==
 
== Important ==
Only the specified waterproofed sensors may be used. The NXT/EV3 must be enclosed in the modified Pelican case at all times when testing. Tethered robots are allowed but the NXT (inside the modified Pelican case) must be inside the fish tank and not touched by any person. A TA must check and approve your design before your first initial testing.
+
Only the specified waterproofed sensors may be used. The EV3 must be enclosed in the modified Pelican case at all times when testing. Tethered robots are allowed but the EV3 (inside the modified Pelican case) must be inside the fish tank and not touched by any person. A TA must check and approve your design before your first initial testing.
  
 
For tips on how to waterproof your vehicle [[Media:Auv_tips.pdf|click here]].
 
For tips on how to waterproof your vehicle [[Media:Auv_tips.pdf|click here]].
Line 73: Line 79:
 
The robot program may not be altered or switched during any part of the mission. Likewise, the robot must be fully autonomous and therefore cannot be touched by any person during testing.
 
The robot program may not be altered or switched during any part of the mission. Likewise, the robot must be fully autonomous and therefore cannot be touched by any person during testing.
  
If at any point water is spilled onto the NXT, power down the NXT and remove the battery pack or its batteries. DO NOT turn the NXT on again. Contact a TA immediately and they will perform the necessary procedure to preserve the electronic device from damages.
+
If at any point water is spilled onto the EV3, power down the EV3 and remove the battery pack or its batteries. DO NOT turn the EV3 on again. Contact a TA immediately and they will perform the necessary procedure to preserve the electronic device from damages.
  
 
For safety reasons the '''use of the AC adapter is strictly prohibited''' for the AUV project while in the room 573A. The AC adapter is connected directly to a 120V AC source that could lead to serious injury if contacted with water. Also only the specified waterproofed sensors and cases may be used in the test tank.
 
For safety reasons the '''use of the AC adapter is strictly prohibited''' for the AUV project while in the room 573A. The AC adapter is connected directly to a 120V AC source that could lead to serious injury if contacted with water. Also only the specified waterproofed sensors and cases may be used in the test tank.
  
'''Please Note:''' Some areas of the AUV navigation field are smooth; other areas have obstructions. The objects and landscape are constructed out of LEGO pieces. Any robot that intentionally damages the course, or deemed unsafe for the aquarium will not be allowed to be tested.
+
'''Please Note:''' Some areas of the AUV navigation field are smooth; other areas have obstructions. Any robot that intentionally damages the course, or deemed unsafe for the aquarium will not be allowed to be tested.
  
During the competition, the instructors or your TA will make all judgments as to the successful completion of tasks. Protests will not be considered.
+
During the competition, the instructors or your TA will make all judgments as to the successful completion of tasks, and will have final say in what counts as completed.  
  
Creativity and innovation are always rewarded. Original designs will receive extra credit.
+
Creativity and innovation are always rewarded. Original and unique designs will receive extra credit.
  
 
{{SLDP: Microsoft Project}}
 
{{SLDP: Microsoft Project}}
Line 90: Line 96:
 
You must build a scale model (1:1) of your design. The following materials will be provided:
 
You must build a scale model (1:1) of your design. The following materials will be provided:
 
# Mindstorms kit
 
# Mindstorms kit
# One NXT/EV3
+
# One EV3
 
# Waterproof Sensors
 
# Waterproof Sensors
 
# Motors
 
# Motors
Line 97: Line 103:
 
The finished AUV must fit inside a 1' &times; 1' &times; 1' box. Any other components that the AUV uses, such as a tether, must also fit within this box.
 
The finished AUV must fit inside a 1' &times; 1' &times; 1' box. Any other components that the AUV uses, such as a tether, must also fit within this box.
  
'''***Additional weights (ballast) and floatation devices (Styrofoam, air tanks) are allowed, but must be provided by the student, all additional materials must be deemed acceptable by either the professor or the TA, if they are deemed unsafe for the devices or hazardous to the course, they must be immediately removed before any additional testing is permitted.'''
+
'''***Additional weights (ballast) and flotation devices (Styrofoam, air tanks) are allowed, but must be provided by the student, all additional materials must be deemed acceptable by either the professor or the TA, if they are deemed unsafe for the devices or hazardous to the course, they must be immediately removed before any additional testing is permitted.'''
  
 
Additional materials can be supplied by your TA.
 
Additional materials can be supplied by your TA.

Revision as of 03:48, 4 September 2018

RFP*: Autonomous Underwater Vehicle (AUV)

* RFP is an acronym for Request For Proposal. Internationally, RFPs are called ITTs, an acronym for Invitation To Tender. Governmental agencies use RFPs to solicit new business.

This project reflects real life scenarios; the robot must be able to handle minor imperfections in the course.

Note: You should only use the materials contained in the price list for LEGO parts for robot projects. If you want to use other parts, get permission from your faculty member to do so, and also to determine the cost of the parts you want to use that are not in this price list.

Introduction and Overview

Australia Great Barrier Reef is one of the largest reefs in the world and the only living one that can be seen from space. This reef contains a massive collection of coral and underwater species making it an expansive ecosystem. Though due to rising water pollution and global warming the in the past few decades the Great Barrier Reef has lost over half its coral population, dangerous coral bleaching is damaging the ecosystem, and many species are at risk.

The Great Barrier Reef Marine Park Authority (GBRMPA) has begun funding research and innovative technology that can help assist in cleaning up the nearby ocean waters and improve the overall health of the local ecosystem. GBRMPA has given funding to your team of researchers and scientists to develop an autonomous underwater vehicle (AUV) that can handle the pollution in the area. This device should focus on being innovative and cost effective.

Specifications

  • Design a robot using Lego Digital Designer as your primary design tool.
  • Build a model of your design using the materials provided.
  • Design a Mindstorms program that will direct the robot's movements.
  • Create a cost estimate of the robot's components.
  • All revisions to the original design must be recorded and explained this includes technical design drawings, as well as cost estimates.
  • All revisions to the Mindstorms program must be recorded and explained.

The AUV must be able to navigate autonomously around the test tank. The robot must achieve at least 100 points in 5 minutes. The tasks may be selected from the list of tasks below.If additional tasks are completed AFTER receiving 100 points for commissioning extra credit will be awarded.

The finished AUV must be less than a 1 foot by 1 foot by 1 foot. Any other components that the AUV uses, such as a tether, must also fit in the same box with the AUV.

The AUV must start in the starting area, but at any depth, facing any direction. The AUV may not touch any of the modules from the starting position.

These specifications must be met for final commissioning. Please refer to the course syllabus for all due dates.

AUV Field

Figure 1: AUV navigation field


Tasks across the tank represent different areas of pollution and disaster that oceans are currently facing. The picture above illustrates each task and the point value associated with accomplishing the task, and the table bellow provides more information. Task numbers correspond to the location numbers on this map. Point values are also noted.

AUV Tasks

1 Lost Fish Nets — Fishing companies have lost some nets in the ocean, these lost nets get caught in and on local wildlife, this can result in wildlife getting stuck and dying in them. Find as many of the nets as possible. Bringing the plants to the surface of the water will count for 5 points each bring them back into the starting base for an additional 15 points each (60 points max) Auv2.jpg
2 Clogged Inlet Pipe — For most cities water comes from purifying local water supplies at water treatment plants, where an inlet pipe is located in the water to pump the water supply to the plant to begin treatment. The inlet pipe for this reverse osmosis plant, where salt water supplies are purified, has been clogged due to overpopulation of the nearby ocean water. Remove the plastic that has gotten stuck in the pipe for 10 points
Error creating thumbnail: convert: unable to extend cache `/var/www/manual/images/b/b2/Auv3.jpg': File too large @ error/cache.c/OpenPixelCache/3680. convert: no images defined `/tmp/transform_ecd58718de9c.jpg' @ error/convert.c/ConvertImageCommand/3210. Error code: 1
3 Wave Power Device — Wave power generation technology are a type of hydroelectric device that uses the motion of the waves to move a turbine to generate electricity. One of these devices became unhinged and moved away from its station. Locate the power device and return it to its original location, a large metal platform at the ocean floor, as long as the device is moved above the station the task is considered complete. (15 points)

Note: Before testing, this sensor must be located to the misplaced location, even if your group has decided to not attempt this task.

Auv4.jpg
4 Installing solar panels — Solar Panels can be made to float on top of the surface of the water to prevent evaporation of water resources and to not take up space on land. Install a solar panel at the location closer to the start for 15 points and install a solar panel at the farther location for 25 points, both panels can be installed. (40 points max) Auv5.jpg
5 Repair the coral reef — Coral grows on top of old coral but sue to the oceans being bleached these groups of coral are dying out and new coral is having a more difficult time growing. One solution is to install 3D printed coral on the ocean floor made out of environmentally safe filament. A piece of coral is considered installed when it is within an 3 cm of one of the metal pieces located in the coral field. (10 points per coral piece, maximum 30 points) Auv5.jpg
6 Plastic Trash — Platic trash is lining the top of the ocean, each piece of plastic is worth 1 point for moving it to the start position, they are worth 2 points for containing it inside the robot or moving it into a 3D printed device. (1 point each to if moved to start, 2 points each for containing it) Auv5.jpg
7 Oil Spill — There has been an oil spill due to a sunken ship. The oil spill is leaking out of a broken oil tank simulated with air bubbles. Your goal is to design a device that will prevent the spill (air bubbles) from being visible for three seconds. The device is still part of your dimension limitations. This task is worth 20 points.
Auv11.jpg

Other Course Features

Ocean Obstacles — The ocean is filled with many things that can get in the way including plants on the ocean floor.
Error creating thumbnail: convert: unable to extend cache `/var/www/manual/images/5/51/Auv8.jpg': File too large @ error/cache.c/OpenPixelCache/3680. convert: no images defined `/tmp/transform_40751cd4a667.jpg' @ error/convert.c/ConvertImageCommand/3210. Error code: 1

Important

Only the specified waterproofed sensors may be used. The EV3 must be enclosed in the modified Pelican case at all times when testing. Tethered robots are allowed but the EV3 (inside the modified Pelican case) must be inside the fish tank and not touched by any person. A TA must check and approve your design before your first initial testing.

For tips on how to waterproof your vehicle click here.

The AUV robot may start in any location and depth in the starting zone, however the robot may not be touch any of the field objects during the initial start.

The robot program may not be altered or switched during any part of the mission. Likewise, the robot must be fully autonomous and therefore cannot be touched by any person during testing.

If at any point water is spilled onto the EV3, power down the EV3 and remove the battery pack or its batteries. DO NOT turn the EV3 on again. Contact a TA immediately and they will perform the necessary procedure to preserve the electronic device from damages.

For safety reasons the use of the AC adapter is strictly prohibited for the AUV project while in the room 573A. The AC adapter is connected directly to a 120V AC source that could lead to serious injury if contacted with water. Also only the specified waterproofed sensors and cases may be used in the test tank.

Please Note: Some areas of the AUV navigation field are smooth; other areas have obstructions. Any robot that intentionally damages the course, or deemed unsafe for the aquarium will not be allowed to be tested.

During the competition, the instructors or your TA will make all judgments as to the successful completion of tasks, and will have final say in what counts as completed.

Creativity and innovation are always rewarded. Original and unique designs will receive extra credit.

Microsoft Project

You must create a schedule to manage your time in Microsoft Project. You can learn Microsoft Project by doing the MS Project Skill Builder. This schedule must include all tasks related to the project from the start of the project to Submission. The Microsoft Project schedule should include the following:

  • Minimum of 20 tasks
  • Milestones should be clearly indicated on the project plan (duration of zero days)
  • Each task must include the person responsible for completing the task (resource names)
  • Use the "Copy Picture" function to include the project plan in the presentations. Do not take a screenshot
  • Gantt chart must be displayed alongside the tasks list (fit onto one slide)
  • Gantt chart must clearly show a progress line
  • Clearly state during the presentation whether the project is on-time, behind schedule, or ahead of schedule

For help in planning the project, review the manual page how to plan the schedule and calculate costs for a project.

Drawings

All drawings and sketches should be made using LEGO Digital Designer (LDD). LDD can be installed for free from the LEGO website.

Using LDD, create four drawings of the robot: front, top, most detailed side, and a drawing of the gear train(s). Sensors, motors, and gears must be included in each drawing. If the robot does not use any gears, make sure to explicitly state that in your presentations.

Each revision of the design must be documented and all changes must be presented during Milestone presentations.

Model

You must build a scale model (1:1) of your design. The following materials will be provided:

  1. Mindstorms kit
  2. One EV3
  3. Waterproof Sensors
  4. Motors
  5. Waterproof Pelican case

The finished AUV must fit inside a 1' × 1' × 1' box. Any other components that the AUV uses, such as a tether, must also fit within this box.

***Additional weights (ballast) and flotation devices (Styrofoam, air tanks) are allowed, but must be provided by the student, all additional materials must be deemed acceptable by either the professor or the TA, if they are deemed unsafe for the devices or hazardous to the course, they must be immediately removed before any additional testing is permitted.

Additional materials can be supplied by your TA.

Figure 3: Photographs of some past robot models constructed from provided materials

Cost Estimate

Once a robot design is complete, a cost estimate must be generated that specifies the cost of all the materials and labor required for the construction of the design. Tabulate this cost information clearly in an Excel spreadsheet, using the materials cost list provided. Help in calculating the cost is available by reviewing how to plan the schedule and calculate costs for a project. The costs for the parts can be found on the price list for LEGO parts for robot projects.

Note: You should only use the materials contained in the price list for LEGO parts for robot projects. If you want to use other parts, get permission from your faculty member to do so, and also to determine the cost of the parts you want to use that are not in this price list.

The cost estimate should include the following:

  • Labor cost breakdown with hours and rates
  • Consolidate low-cost pieces: axles, beams, bricks, bushings, connectors, gears, plates
  • Itemize high-cost pieces: controllers (EV3 brick), sensors, motors
  • No decimal places; this is an estimate after all. Round appropriately
  • Total cost must be shown in the bottom right corner

AUV case is included in EV3 brick cost.

Milestones and Benchmarks

As you work on your project, you will be required to present periodic reports on your progress. We call these Milestones. All the items assigned in each Milestone are called deliverables. These deliverables often consist of a combination of written submissions, presentations, and demonstrations.

Milestone 1

See How To Give a Milestone Presentation for the format of a Milestone presentation.

Milestone 1 Deliverables:

  • Presentation:
    • Project description
    • Design approach
    • Mission statement
    • Preliminary CAD drawing of robot
    • Cost estimate
    • Microsoft Project schedule
    • Progress update: current state of the project

Look Ahead: What tasks are planned between now and Milestone 2?

Benchmark Assessment A

Benchmark assessments evaluate the progress of your project. Benchmark Assessment A is due at the end of Modelshop Session I. There are penalties for not completing this on time. Refer to the EG1003 Grading Policy for more information.

To pass Benchmark A, your design must complete all of the following:

  • Earn at least 25 points.

Milestone 2

See How To Give a Milestone Presentation for the format of a Milestone presentation.

Milestone 2 Deliverables:

  • Presentation:
    • Project description
    • Design approach
    • Design changes since Milestone 1
    • Mission statement
    • CAD drawings: top, front, most detailed side, isometric, gear train
    • Mindstorms program
    • Updated cost estimate (previous and current). What changes were made?
    • Updated Microsoft Project schedule (previous and current). What changes were made?
    • Progress update: current state of the project (time, budget, etc.)

Look Ahead: What tasks are planned between now and Milestone 3?

Benchmark Assessment B

Benchmark Assessment B is due at the end of Modelshop Session II. There are penalties for not completing this on time. Refer to the EG1003 Grading Policy for more information.

To pass, the design must complete all of the following:

  • Earn at least 60 points.

Milestone 3

See How To Give a Milestone Presentation for the format of a Milestone presentation.

Milestone 3 Deliverables:

  • Presentation:
    • Project description
    • Design approach
    • Design changes since Milestone 2
    • Mission statement
    • CAD drawings: top, front, most detailed side, isometric, gear train
    • Mindstorms program
    • Updated cost estimate (previous and current). What changes were made?
    • Updated Microsoft Project schedule (previous and current). What changes were made?
    • Progress update: current state of the project (time, budget, etc.)

Look ahead: What tasks are planned between now and the completion of the project?

Commissioning

Refer to the syllabus for the Commissioning deadline. There are penalties for not completing this on time. Refer to the EG1003 Grading Policy for more information.

To pass, the design must complete all of the following:

  • Earn at least 100 points.

Final Presentation

The Final Presentation will be a technical briefing, similar to the Milestones, but also serves as a sales presentation explaining why your company should be selected instead of the competition. Please include the following:

  • Problem statement
  • Solution overview
  • Company description and qualifications
  • Drawings
  • Mindstorms program
  • Cost estimate
  • Microsoft Project schedule
  • Video demonstration
  • Why should the company be awarded this contract?

Submission

All SLDPs must submit online. Please visit https://eg.poly.edu/finalSLDP.php for the link to the Project Submission form and each SLDP group's individualized login information. To submit, you must login to the EG1003 website using this special login information. Submitting with your NYU account or any other account will generate an error. You may resubmit at any time before the deadline. Please note that submission times are based on the most recent submission.

Please note the deliverables for this project are as follows. If any of the following items are omitted, you will be penalized. Be sure to click submit at the bottom of the form. The following list includes deliverable items that are expected from your group:

  • Submission deliverables:
    • Final presentation
    • Cover page and table of contents
    • Final Mindstorms program
    • Initial sketch
    • All the drawings of your design (initial through final)
    • Video
    • Final MS Project Schedule
    • Final cost estimate
    • Resume(s) (No fictitious resumes will be accepted.)

Early Submission

If you submit your project one academic week early, you are eligible for a bonus that will be added to your final semester-long project grade. You must submit all deliverables one academic week before the submission deadline (see syllabus for exact date). The deliverables received early are the ones you will use in your presentation. No adjustments to the submitted deliverables will be accepted.

Late Submission

Late Submission is not allowed. If you do not Commission or Partial Commission by the deadline set forth in the syllabus, you will not be allowed to submit and will receive a zero for the project grade. In order to receive Partial Commissioning, two TAs must analyze the project and determine its level of completeness in terms of Commissioning requirements. Please refer to the EG1003 Grading Policy for more information.