Difference between revisions of "3D Printing Extra Credit"

From EG1003 Lab Manual
Jump to: navigation, search
Line 59: Line 59:
 
Before giving us the link you must also make sure to set the share permissions to allow anyone with the link to have access to the file. To do this select “More...” in share options then select “Anyone with the link”.
 
Before giving us the link you must also make sure to set the share permissions to allow anyone with the link to have access to the file. To do this select “More...” in share options then select “Anyone with the link”.
  
[[File:LinkAccess.png|thumb|left|450px|alt=Home Screen.|]]
+
[[File:LinkAccess.png|thumb|left|300px|alt=Home Screen.|]]
  
[[File:LinkAccess2.png|thumb|right|450px|alt=Home Screen.|]]
+
[[File:LinkAccess2.png|thumb|right|300px|alt=Home Screen.|]]

Revision as of 17:03, 8 April 2016

3D Printing Extra Credit

The 3D printing extra credit is given for designing your company logo in any CAD (Computer Aided Design) software of your choice and having it approved for printing by a 3D printing specialist. Your logo will then be printed on a first come first served basis (If EG cannot print your design due to time or material constraints you will not be penalized).

Specifications

Logos:

  • Must be 2 colors
  • Maximum material usage 15 grams total
  • Logo’s must be integrated with you project is some way
    • Pin worn during final presentation
    • Used as a part of your SLS model
    • Attached to robot during commissioning video
      • Add provided Lego technic beam model to your part to allow it to be connected to your robot (in important downloads)
  • Must be original content
  • Submitted by Milestone 3

Course Modificaiton:

  • Maximum 1 Color
    • Maximum print size (11.2 x 6.0 x 6.1in)
    • Object may not be touched after the robot has started to run
  • Original Design
    • Must be different from other groups’ submissions
    • Will be judged by 3D printing TA’s and Professors
  • Can be .thing or .stl extension

Software

To design your logo you will need any CAD software as well as Makerbot Desktop Software. There are many options for software that can be used, the only necessary feature is that the software can export files as an STL (stereo lithography) extension. Some examples of these pieces of software are:

  • Autodesk Inventor – Free student edition
  • 123D – Free (Free)
  • TinkerCAD – Free (Online)
  • Blender – Free (Open source)
  • OpenSCAD – Free (Open source)
  • Solidworks – Available in NYU computer labs
  • Rhinoceros – Free for mac

To make a 2 color design you will need to save your logo in two separate STL files (one for each color). The two files are then imported into Makerbot Desktop aligned and the extruders are selected (For more info see the “Makerbot Desktop Guide”).

Design Considerations

Make a flat bottom: A large flat bottom increases the adhesion between the build platform and the part, keeping the part from shifting around during a print.

Keep overhangs close to 45 degrees: Each layer of a 3D print needs to be supported from below. You can avoid adding additional supports to a print if all the overhanging parts are at no more than a 45 degree angle from vertical.

Avoid thin walls and thin columns: Thin walls and column often do not come out well. The thickness of a thin wall should be a multiple of 0.35mm. Thin columns will usually come out distorted because they melt under the nozzle.


Submission

Submission of your logo or course modification will take place through the google form linked on the side bar of the EG website. To submit your file you will be required to upload your .thing file to your NYU drive and give us a share link. To get a share link, click share followed by “Get shareable link”.

Home Screen.

Before giving us the link you must also make sure to set the share permissions to allow anyone with the link to have access to the file. To do this select “More...” in share options then select “Anyone with the link”.

Home Screen.
Home Screen.